Electric Engravers

Filter by

Power Source

For Use On

Tip Material

Stroke Speed Adjustability

Voltage

Cord Length

Material

Tip Style

Electrical Connection

Straight Blade

USB

Wi-Fi

Number of Blades

Manufacturer

Output Voltage

Adjustability

Current

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Body Material

Plastic

Stainless Steel

Maximum Strokes per Minute

RoHS

REACH

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Weight

Overall Depth

Overall Height

Overall Width

Performance

31 Products

Plastic Body

Stainless Steel Body

Freehand permanent markings on a variety of materials. These engravers are often used to mark tools and equipment for easy identification and tracking. Adjust the stroke speed to control the depth of your marks. Low stroke speed creates shallow lines and is best for soft materials, such as plastic and wood. High stroke speed creates deep lines and is best for hard materials, such as metal.

Stainless Steel Body—More durable than plastic to stand up to wear over time. These engravers last longer and won’t get damaged in your toolbox.

Carbide—The standard choice for engraving a variety of materials. Carbide tips are hard enough to mark metal and can also be used on plastic and wood.

Steel Tip—Ideal for engraving soft materials, such as plastic, wood, and leather. Steel tips are less durable than carbide tips.

Diamond Tip—The most durable tip material. Diamond tips are the best choice for marking extra-hard materials, such as ceramic, glass, and stone.

	Engravers														Carbide Engraver Tips		Steel Engraver Tips		Diamond Engraver Tips
	Body Material	Max. Strokes per min., stroke/min	Stroke Speed Adjustability	Tip Style	Tip Material	Carbide For Use On	Steel For Use On	Diamond For Use On	Wt., lb.	Cord Lg., ft.	Certification	Includes		Each		Each		Each		Each
Dremel



		Plastic	7,200	Adjustable	Pointed	Carbide	Acrylic Plastic, Aluminum, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood	—	—	0.8	5	UL Listed	0-9 Numeric Stencils, A-Z Character Stencils, Dash Stencil (-), Forward Slash Stencil (/)	1613T1	000000	1613T3	00000	———	0	1613T4	000000


		Plastic	7,200	Adjustable	Pointed	Carbide, Diamond	Acrylic Plastic, Aluminum, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood	—	Acrylic Plastic, Aluminum, Brass, Bronze, Ceramic, Copper, Glass, Iron, Lead, Nickel, Phenolic, Rubber, Steel, Stone, Tin, Wood	0.8	5	UL Listed	0-9 Numeric Stencils, A-Z Character Stencils, Dash Stencil (-), Forward Slash Stencil (/)	1613T2	00000	1613T3	0000	———	0	1613T4	00000


		Other Engravers



				Stainless Steel	7,200	Adjustable	Pointed	Carbide, Steel, Diamond	Acrylic Plastic, Aluminum, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood	Acrylic Plastic, Leather, Rubber, Wood	Acrylic Plastic, Aluminum, Brass, Bronze, Ceramic, Copper, Glass, Iron, Lead, Nickel, Phenolic, Rubber, Steel, Stone, Tin, Wood	0.6	6	—	—	1864T22	000000	1864T24	0000	1864T23	00000	1864T25	00000

Bench-Top Laser Cutters

Make custom parts, quick prototypes, and intricate engravings with these cutters—they’re the most accurate cutters we offer. Small enough to fit on a desk, they won’t take up floor space in your facility. Connect them to your computer via Ethernet, USB, or Wi-Fi to create designs, manage settings, and start cutting jobs. These cutters include a camera that shows a live feed of the working area, so you can adjust your material’s position and monitor cuts.

An air compressor mounted next to the laser blows cool air as it cuts, clearing debris and keeping parts from charring. These cutters also have a cooling system that uses air or water to keep the laser tube from overheating. To remove dust and fumes, direct exhaust to a well-ventilated area or connect to an air filtration system. Not for use on metal or vinyl polymers, such as PVC, polycarbonate, or PTFE.

Light Duty

Light duty cutters are best for prototyping and one-off jobs, since they’re smaller and lighter in weight than heavy duty cutters. These cutters include a rotary attachment that turns material as it’s being cut, so you can shape or engrave tubing and other round objects. They also include an exhaust hose. They’re compatible with CADLaser, CorelLaser, LightBurn, and RDWorks software.

Glass Laser Tube—Their laser tube is glass, so it won’t last as long as the aluminum and ceramic tube in heavy duty cutters.

Cannot Be Sold To—Cutters that cannot be sold to the listed areas are restricted due to product regulations.

	For Max. Thk.								Max. Work Surface			Overall
	Cork	Fabric	Leather	Paper	Plastic	Rubber	Wood	Max. Engraving Speed, mm/s	Ht.	Lg.	Wd.	Ht.	Wd.	Dp.	Lens Lg.	Laser Type	Laser Tube Material	Cannot Be Sold To		Each
For Cork, Fabric, Leather, Paper, Plastic, Rubber, and Wood



		1/4"	1/64"	3/16"	1/16"	1/4"	3/16"	1/4"	500	5/8"	20 1/8"	11 3/4"	11 1/8"	41 1/4"	22 1/4"	2"	CO₂	Glass	Ontario	7344N15	000000000

Heavy Duty

Heavy duty cutters are made in the U.S. with an all-metal construction that stands up to frequent use and long production runs. For the cleanest possible cuts, these cutters automatically raise or lower your material so it’s the correct distance from the laser head.

Use the touchscreen to access saved designs, move the laser, and adjust settings without connecting to your computer. With 1 GB of internal storage, you can save and repeat frequent jobs. You can also test a design before you cut by tracing the outline with a beam of light. These cutters can read files from any design software, including AutoCAD, Illustrator, and Photoshop, and they’re compatible with EpilogSuite.

These cutters have a 4” exhaust port rather than a hose—connect it to an air filtration system or an exhaust blower that’s rated at least 350 CFM.

Aluminum Laser Tube/Ceramic Laser Tube—The laser tube is a blend of aluminum and ceramic that lasts longer and makes finer cuts than glass tubes.

	For Max. Thk.									Max. Work Surface			Overall
	Cork	Fabric	Fiberglass	Leather	Paper	Plastic	Rubber	Wood	Max. Engraving Speed, mm/s	Ht.	Lg.	Wd.	Ht.	Wd.	Dp.	Lens Lg.	Laser Type	Laser Tube Material		Each
For Cork, Fabric, Fiberglass, Leather, Paper, Plastic, Rubber, and Wood



		1/4"	1/8"	1/16"	1/8"	1/8"	1/8"	1/8"	1/4"	1,500	7"	24"	12"	17 7/8"	39 1/2"	26 1/2"	2"	CO₂	Aluminum/Ceramic	7344N11	0000000000

Accessories and Replacements for Laser Cutters

	Max. Work Surface
2"	24"	12"	7344N14	0000000

	Max. Work Surface
4"	24"	12"	7344N13	0000000

Max. Work Surface
24"	12"	7344N12	000000000

Etchers

Mark surfaces with handwritten messages, designs, or logos. Draw your message on stencil paper using a scriber or other sharp point, then place the stencil on your metal marking surface. To transfer the message, wet the pad on the etcher with etching solution and press it over the stencil, then touch the grounding wire to your marking surface to activate the solution. Marks are black. Use the included DC voltage adapter clip to make clear and frosted marks.

		Output			Electrical
	Etching Dp.	Current	Voltage	Input Voltage, V AC	Connection	No. of Blades	Cord Lg., ft.	Includes		Each
Iron and Steel



		0.0001" to 0.003"	2 amp	10V AC	120	Straight Blade	2	6	10 Small Sheets of Stencil Paper (2 1/4" Ht. × 3" Wd.) Iron and Steel Etching Solution (2-fl. oz. Bottle) Neutralizer Powder Mix (One Pack) One DC Voltage Adapter Clip One Etcher One Grounding Plate	8597T14	0000000


		Aluminum, Brass, Bronze, Copper, Iron, Stainless Steel, and Steel



				0.0001" to 0.003"	2 amp	10V AC	120	Straight Blade	2	6	10 Small Etching Pads (1 3/4" Ht. × 2 1/4" Wd.) 100 Small Sheets of Stencil Paper (2 1/4" Ht. × 3" Wd.) 3 Small Etching Grids (7/8" Ht. × 1 3/4" Wd.) Aluminum Etching Solution (8-fl. oz. Bottle) Black Oxide Etching Solution (8-fl. oz. Bottle) Copper, Brass, and Bronze Etching Solution (8-fl. oz. Bottle) Iron and Steel Etching Solution (8-fl. oz. Bottle) Neutralizer (8-fl. oz. Bottle) Neutralizer Powder Mix (One Pack) One DC Voltage Adapter Clip One Etcher One Grounding Plate Plastic Carrying Case Stainless Steel Etching Solution (8-fl. oz. Bottle)	8597T76	000000


				0.0001" to 0.003"	2 amp, 10 amp	10V AC, 15V AC	120	Straight Blade	2	6	100 Small Sheets of Stencil Paper (2 1/4" Ht. × 3" Wd.) 5 Large Sheets of Stencil Paper (4" Ht. × 4 1/2" Wd.) 5 Medium Sheets of Stencil Paper (3-1/2" Ht. x 4 1/4" Wd.) Aluminum Etching Solution (4-fl. oz. Bottle) Black Oxide Etching Solution (4-fl. oz. Bottle) Copper, Brass, and Bronze Etching Solution (4-fl. oz. Bottle) Five Large Etching Pads (4" Ht. × 4 1/4" Wd.) Five Medium Etching Pads (2 1/4" Ht. × 4" Wd.) Iron and Steel Etching Solution (8-fl. oz. Bottle) Neutralizer (8-fl. oz. Bottle) Neutralizer Powder Mix (One Pack) One Grounding Plate One Large Etching Grid (2 1/4" Ht. × 4" Wd.) One Medium Etching Grid (2 1/4" Ht. × 2 1/2" Wd.) One Small Etching Grid (7/8" Ht. × 1 3/4" Wd.) Plastic Carrying Case Stainless Steel Etching Solution (8-fl. oz. Bottle) Two DC Voltage Adapter Clips Two Etchers Two Small Etching Pads (1 3/4" Ht. × 2 1/4" Wd.)	8597T75	000000

Accessories and Replacements for Etchers

Etching Stencil Kits

Cannot Be Sold to Canada—Stencil Kits cannot be sold to Canada because they exceed regulatory limits on mercury.

Includes	Cannot Be Sold To		Each
10 Large Sheets of Vinyl Stencil Paper (6" Ht. × 5" Wd.) Developing Tray Digital Timer (Battery Not Included) Exposure Tray Four Developer Sponges Printer Transfer Sheets (Three Each for Inkjet and Laser Printers) Stencil Developer (16-fl. oz. Bottle) Ultraviolet Exposure Unit (12" Ht. × 6" Wd. × 5" Dp., 120V AC, 6-ft. Cord with Two-Prong Plug)	Canada	2807T17	0000000

Ht.	Wd.	Pkg. Qty.		Pkg.
2 1/4"	3"	100	8597T45	000000

Ht.	Wd.	Pkg. Qty.		Pkg.
1 3/4"	2 1/4"	10	8597T36	000000
2 1/4"	4"	10	8597T34	00000
4"	4 1/4"	10	8597T28	00000

Replacement Etching Grids

Etching grids allow precise alignment of your stencil on your marking surface.

Ht.	Wd.	Includes	Pkg. Qty.		Pkg.
7/8"	1 3/4"	—	3	8597T37	000000
—	—	1 Medium Etching Grid (2 1/4" Ht. × 1 3/4" Wd.), 5 Medium Sheets of Stencil Paper (3 1/2" Ht. × 4" Wd.), Five Medium Etching Pads (2 1/4" Ht. × 4" Wd.)	1	8597T73	00000
—	—	1 Large Etching Grid (2 1/4" Ht. × 4" Wd.), 5 Large Sheets of Stencil Paper (4" Ht. × 4 1/2" Wd.), Five Large Etching Pads (4" Ht. × 4 1/4" Wd.)	1	8597T72	00000

Replacement Etching Solution and Replacement Etching Solution Neutralizers

Replacement Neutralizer Powder Mix (16 fl. oz. Yield)—Neutralizer removes etching solution residue from your metal marking surface after etching.

Replacement Neutralizer (16 fl. oz.)—Neutralizer removes etching solution residue from your metal marking surface after etching.

		Each
Replacement Aluminum Etching Solution (8 fl. oz.)	8597T23	000000
Replacement Iron and Steel Etching Solution (16 fl. oz.)	8597T16	00000
Replacement Black Oxide Etching Solution (8 fl. oz.)	8597T24	00000
Replacement Copper, Brass, and Bronze Etching Solution (16 fl. oz.)	8597T22	00000
Replacement Stainless Steel Etching Solution (16 fl. oz.)	8597T21	00000
Replacement Neutralizer Powder Mix (16 fl. oz. Yield)	8597T39	00000
Replacement Neutralizer (16 fl. oz.)	8597T18	00000