Rated IP55 with an epoxy-coated enclosure, these gearmotors drive low-speed, high-torque applications in areas that are subject to low-pressure washdowns. They combine a motor with a speed reducer to lower speeds while increasing torque. Since their shaft is parallel to the motor, they transmit motion inline with the motor. They have a TENV (totally enclosed nonventilated) enclosure that is similar to a TEFC (totally enclosed fan cooled) enclosure, except it doesn't have a fan. It relies on cooling from the air circulation created by the motor's motion instead.

You can wire the shaft to rotate clockwise or counterclockwise; instructions are included.

Drive low-speed, high-torque applications in tight areas that are washed down. These gearmotors have an epoxy-coated enclosure and are rated IP55 to protect against water from low-pressure washdowns. They combine both a motor and speed reducer to lower speeds and increase torque. Since their shaft is at a 90° angle from their motor, they transmit motion alongside your application, so they take up less space than gearmotors with a shaft that's inline with their motor. They have a TENV (totally enclosed nonventilated) enclosure that is similar to a TEFC (totally enclosed fan cooled) enclosure, except it doesn't have a fan. It relies on cooling from the air circulation created by the motor's motion instead.

You can wire the shaft to rotate clockwise or counterclockwise; instructions are included. You can also switch the shaft's right-hand orientation to a left-hand orientation by removing the retaining covers, reversing the orientation, and then reassembling.