About Electric Motors
When replacing a motor, use the information on your motor’s nameplate to guide your selection.
More
Washdown AC Gearmotors
IP rated, these gearmotors stand up to high-pressure washdowns. They combine a motor with a speed reducer to lower speed while increasing torque. Their parallel shaft transmits motion inline with the motor.
Since they’re inverter-rated, you can adjust the speed with a motor speed control (not included). Wire these motors for clockwise or counterclockwise rotation; instructions are included.
Face-mount motors bolt directly to your equipment. They require a power cord (sold separately).
TENV (totally enclosed non-ventilated) enclosures are similar to TEFC enclosures, except they don’t have a fan. They rely on air circulation from the motion of the motor for cooling.
Motors rated IP69K protect against dust, debris, and high-temperature washdowns.
For technical drawings and 3-D models, click on a part number.
Overall | Shaft | Insulation | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Power, hp | Speed @ Continuous Operating Torque | Full Load Current, A | Motor Enclosure Type | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base | Class | Max Temp., °F | Environmental Rating | Each | |
230 Volts AC—Face Mount | ||||||||||||||
| 1/8 | 7 rpm @ 500 in.-lbs. | 0.5 | Totally Enclosed Nonventilated (TENV) | 10 3/4" | 5 1/4" | 5 1/4" | 3/4" | 1 5/8" | 3.45" | F | 311° | IP69K | 0000000 | 000000000 |
| 1/8 | 12 rpm @ 500 in.-lbs. | 0.5 | Totally Enclosed Nonventilated (TENV) | 10 3/4" | 5 1/4" | 5 1/4" | 3/4" | 1 5/8" | 3.45" | F | 311° | IP69K | 0000000 | 00000000 |
| 1/8 | 24 rpm @ 256 in.-lbs. | 0.5 | Totally Enclosed Nonventilated (TENV) | 10 3/4" | 5 1/4" | 5 1/4" | 3/4" | 1 5/8" | 3.45" | F | 311° | IP69K | 0000000 | 00000000 |
| 1/8 | 47 rpm @ 128 in.-lbs. | 0.5 | Totally Enclosed Nonventilated (TENV) | 10 3/4" | 5 1/4" | 5 1/4" | 3/4" | 1 5/8" | 3.45" | F | 311° | IP69K | 0000000 | 00000000 |
| 1/8 | 91 rpm @ 70 in.-lbs. | 0.5 | Totally Enclosed Nonventilated (TENV) | 10 3/4" | 5 1/4" | 5 1/4" | 3/4" | 1 5/8" | 3.45" | F | 311° | IP69K | 0000000 | 00000000 |
| 1/8 | 178 rpm @ 34 in.-lbs. | 0.5 | Totally Enclosed Nonventilated (TENV) | 10 3/4" | 5 1/4" | 5 1/4" | 3/4" | 1 5/8" | 3.45" | F | 311° | IP69K | 0000000 | 00000000 |
| 1/8 | 347 rpm @ 16 in.-lbs. | 0.5 | Totally Enclosed Nonventilated (TENV) | 10 3/4" | 5 1/4" | 5 1/4" | 3/4" | 1 5/8" | 3.45" | F | 311° | IP69K | 0000000 | 00000000 |
Right-Angle AC Gearmotors
A motor and speed reducer in one, these gearmotors have hypoid gears for energy-efficient operation. You can use them to turn a shaft on your equipment or add a keyed shaft (sold separately). Wire for clockwise or counterclockwise rotation; instructions are included. Gearmotors meet IP54 for protection from dust and splashed water. They're inverter rated so you can use them with a motor speed control (not included) to adjust the motor speed.
For technical drawings and 3-D models, click on a part number.
Gearmotors | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Output | Optional Keyed Shafts with Key Stock | |||||||||||
| Power, hp | Speed @ Continuous Operating Torque | Radial Load Cap., lbs. | Full Load Current, A | Lg. | Wd. | Ht. | For Shaft Dia. | Shaft Center to Base | Environmental Rating | Each | Each | ||
230 Volts AC, Three Phase | |||||||||||||
| 1/8 | 14 rpm @ 440 in.-lbs. | 550 | 0.63 | 14 3/4" | 4" | 6 1/8" | 3/4" | 1.91" | IP54 | 0000000 | 000000000 | 0000000 | 000000 |
| 1/8 | 28 rpm @ 220 in.-lbs. | 455 | 0.63 | 14 3/4" | 4" | 6 1/8" | 3/4" | 1.91" | IP54 | 0000000 | 00000000 | 0000000 | 00000 |
| 1/8 | 56 rpm @ 105 in.-lbs. | 370 | 0.63 | 14 3/4" | 4" | 6 1/8" | 3/4" | 1.91" | IP54 | 0000000 | 00000000 | 0000000 | 00000 |
| 1/8 | 84 rpm @ 73 in.-lbs. | 330 | 0.63 | 14 3/4" | 4" | 6 1/8" | 3/4" | 1.91" | IP54 | 0000000 | 00000000 | 0000000 | 00000 |
| 1/8 | 168 rpm @ 35 in.-lbs. | 270 | 0.63 | 14 3/4" | 4" | 6 1/8" | 3/4" | 1.91" | IP54 | 0000000 | 00000000 | 0000000 | 00000 |
230/400-460 Volts AC, Three Phase | |||||||||||||
| 1/8 | 7 rpm @ 900 in.-lbs. | 940 | 0.9/0.6-0.7 | 13 1/2" | 4 3/4" | 6 5/8" | 1" | 2.11" | IP54 | 0000000 | 00000000 | 0000000 | 00000 |
| 1/8 | 14 rpm @ 450 in.-lbs. | 780 | 0.9/0.6-0.7 | 13 1/2" | 4 3/4" | 6 5/8" | 1" | 2.11" | IP54 | 0000000 | 00000000 | 0000000 | 00000 |
DC Gearmotors
Convert speed to torque to get the power you need—gearmotors are a motor and speed reducer in one. You can wire for clockwise or counterclockwise rotation; instructions are included. Gearmotors transmit motion inline with the motor.
To control motor speed, motor controls are also available. To convert AC power to DC power, see AC to DC transformers.
For technical drawings and 3-D models, click on a part number.
Gearmotors | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Shaft | Insulation | Replacement Motor Brushes | ||||||||||||||
| Power, hp | Speed @ Continuous Operating Torque | Radial Load Capacity, lbs. | Full Load Current, A | Motor Enclosure Type | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base | Class | Max. Temp., ° F | Each | Pkg. Qty. | Pkg. | ||
90 Volts DC | |||||||||||||||||
| 1/8 | 22 rpm @ 300 in.-lbs. | 322 | 1.16 | Totally Enclosed Nonventilated (TENV) | 12 1/4" | 4" | 5 1/4" | 5/8" | 1 3/8" | 3 1/2" | F | 311° | 0000000 | 0000000 | 2 | 000000000 | 000000 |
| 1/8 | 31 rpm @ 220 in.-lbs. | 327 | 1.3 | Totally Enclosed Nonventilated (TENV) | 11 1/2" | 5" | 5 1/4" | 5/8" | 1 1/2" | 3 1/2" | F | 311° | 0000000 | 000000 | 1 | 000000000 | 00000 |
| 1/8 | 51 rpm @ 130 in.-lbs. | 277 | 1.3 | Totally Enclosed Nonventilated (TENV) | 11 1/2" | 5" | 6 1/4" | 5/8" | 1 1/2" | 3 1/2" | F | 311° | 0000000 | 000000 | 1 | 000000000 | 00000 |
| 1/8 | 61 rpm @ 113 in.-lbs. | 267 | 1.3 | Totally Enclosed Nonventilated (TENV) | 11 1/2" | 5" | 5 1/4" | 5/8" | 1 1/2" | 3 1/2" | F | 311° | 0000000 | 000000 | 1 | 000000000 | 00000 |
| 1/8 | 94 rpm @ 77 in.-lbs. | 236 | 1.3 | Totally Enclosed Nonventilated (TENV) | 11 1/2" | 5" | 5 1/4" | 5/8" | 1 1/2" | 3 1/2" | F | 311° | 0000000 | 000000 | 1 | 000000000 | 00000 |
| 1/8 | 167 rpm @ 43 in.-lbs. | 197 | 1.3 | Totally Enclosed Nonventilated (TENV) | 11 1/2" | 5" | 5 1/4" | 5/8" | 1 1/2" | 3 1/2" | F | 311° | 0000000 | 000000 | 1 | 000000000 | 00000 |
| 1/8 | 360 rpm @ 17 in.-lbs. | 200 | 1.1 | Totally Enclosed Nonventilated (TENV) | 9 3/4" | 3 3/4" | 3 3/4" | 1/2" | 1" | 2.55" | F | 311° | 0000000 | 000000 | 2 | 000000000 | 00000 |
Right-Angle DC Gearmotors
A good solution for tight spaces, these gearmotors transmit motion at a 90° angle from the motor, so they’re positioned alongside your application when mounted. Gearmotors combine a motor and speed reducer to lower speed and increase torque.
To control motor speed, motor controls are also available. To convert AC power to DC power, see AC to DC transformers.
Gearmotors with a hollow body/removable shaft come assembled with a single-sided shaft for right-hand output. You can remove the shaft and turn it around for left-hand output, or you can replace it with a dual shaft (sold separately) to drive two processes at the same time. To monitor shaft rotation, you can pair this shaft with an encoder (not included).
For technical drawings and 3-D models, click on a part number.
Gearmotors | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Shaft | Insulation | Optional Conduit Boxes | Replacement Motor Brushes | |||||||||||||
| Power, hp | Speed @ Continuous Operating Torque | Radial Load Cap., lbs. | Full Load Current, A | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base | Class | Max. Temp., °F | Each | Each | Each | |||
90 Volts DC | |||||||||||||||||
| 1/8 | 42 rpm @ 80 in.-lbs. | 235 | 1.4 | 10 3/4" | 5 1/4" | 4 3/4" | 5/8" | 1.8" | 1.67" | H | 356° | 00000000 | 0000000 | 00000000 | 000000 | 000000000 | 000000 |
| 1/8 | 62 rpm @ 70 in.-lbs. | 235 | 1.4 | 10 3/4" | 5 1/4" | 4 3/4" | 5/8" | 1.8" | 1.67" | H | 356° | 00000000 | 000000 | 00000000 | 00000 | 000000000 | 00000 |
| 1/8 | 122 rpm @ 45 in.-lbs. | 235 | 1.4 | 10 3/4" | 5 1/4" | 4 3/4" | 5/8" | 1.8" | 1.67" | H | 356° | 00000000 | 000000 | 00000000 | 00000 | 000000000 | 00000 |
| 1/8 | 237 rpm @ 25 in.-lbs. | 235 | 1.4 | 10 3/4" | 5 1/4" | 4 3/4" | 5/8" | 1.8" | 1.67" | H | 356° | 00000000 | 000000 | 00000000 | 00000 | 000000000 | 00000 |
| 1/8 | 475 rpm @ 13 in.-lbs. | 235 | 1.4 | 10 3/4" | 5 1/4" | 4 3/4" | 5/8" | 1.8" | 1.67" | H | 356° | 00000000 | 000000 | 00000000 | 00000 | 000000000 | 00000 |
Gearmotors | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Shaft | Insulation | Optional Conduit Boxes | Replacement Motor Brushes | |||||||||||||
| Power, hp | Speed @ Continuous Operating Torque | Radial Load Cap., lbs. | Full Load Current, A | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base | Class | Max. Temp., °F | Each | Each | Pkg. | |||
90 Volts DC | |||||||||||||||||
| 1/8 | 30 rpm @ 94 in.-lbs. | 300 | 1.28 | 10 1/4" | 5 1/4" | 4 3/4" | 5/8" | 1.6" | 1.45" | F | 311° | 00000000 | 0000000 | 00000000 | 000000 | 000000000 | 000000 |
| 1/8 | 40 rpm @ 82 in.-lbs. | 300 | 1.28 | 10 1/4" | 5 1/4" | 4 3/4" | 5/8" | 1.6" | 1.45" | F | 311° | 00000000 | 000000 | 00000000 | 00000 | 000000000 | 00000 |
| 1/8 | 60 rpm @ 64 in.-lbs. | 300 | 1.28 | 10 1/4" | 5 1/4" | 4 3/4" | 5/8" | 1.6" | 1.45" | F | 311° | 00000000 | 000000 | 00000000 | 00000 | 000000000 | 00000 |
| 1/8 | 180 rpm @ 27 in.-lbs. | 300 | 1.28 | 10 1/4" | 5 1/4" | 4 3/4" | 5/8" | 1.6" | 1.45" | F | 311° | 00000000 | 000000 | 00000000 | 00000 | 000000000 | 00000 |
Shaft | Keyway | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Type | Number of | Key Included | Lg. | Wd. | Dp. | Direction of Operation | Includes | Each | |
| 5/8" | 1.6" | Keyed | 2 | Yes | 1.22" | 0.188" | 0.108" | Clockwise or Counterclockwise | Retaining Rings | 00000000 | 0000000 |
Washdown Right-Angle DC Gearmotors
Drive low-speed, high-torque applications in tight areas that are washed down. These gearmotors have an epoxy-coated enclosure and are rated IP55 to protect against water from low-pressure washdowns. They combine both a motor and speed reducer to lower speeds and increase torque. Since their shaft is at a 90° angle from their motor, they transmit motion alongside your application, so they take up less space than gearmotors with a shaft that's inline with their motor. They have a TENV (totally enclosed nonventilated) enclosure that is similar to a TEFC (totally enclosed fan cooled) enclosure, except it doesn't have a fan. It relies on cooling from the air circulation created by the motor's motion instead.
You can wire the shaft to rotate clockwise or counterclockwise; instructions are included. You can also switch the shaft's right-hand orientation to a left-hand orientation by removing the retaining covers, reversing the orientation, and then reassembling.
For technical drawings and 3-D models, click on a part number.
Gearmotors | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Shaft | Insulation | Replacement Motor Brushes | |||||||||||||
| Power, hp | Speed @ Continuous Operating Torque | Full Load Current, A | Motor Enclosure Type | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base | Class | Max. Temp., °F | Environmental Rating | Each | Each | ||
90 Volts DC | ||||||||||||||||
| 1/8 | 42 rpm @ 80 in.-lbs. | 2.2 | Totally Enclosed Nonventilated (TENV) | 10 3/4" | 5 1/4" | 6 1/2" | 5/8" | 1 3/4" | 1.67" | F | 311° | IP55 | 0000000 | 000000000 | 000000000 | 000000 |
Washdown DC Gearmotors
Rated IP55 with an epoxy-coated enclosure, these gearmotors drive low-speed, high-torque applications in areas that are subject to low-pressure washdowns. They combine a motor with a speed reducer to lower speeds while increasing torque. Since their shaft is parallel to the motor, they transmit motion inline with the motor. They have a TENV (totally enclosed nonventilated) enclosure that is similar to a TEFC (totally enclosed fan cooled) enclosure, except it doesn't have a fan. It relies on cooling from the air circulation created by the motor's motion instead.
You can wire the shaft to rotate clockwise or counterclockwise; instructions are included.
For technical drawings and 3-D models, click on a part number.
Gearmotors | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Shaft | Insulation | Replacement Motor Brushes | |||||||||||||
| Power | Speed @ Continuous Operating Torque | Full Load Current, A | Motor Enclosure Type | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base | Class | Max. Temp., °F | Environmental Rating | Each | Each | ||
90 Volts DC | ||||||||||||||||
| 1/8 hp | 14 rpm @ 341 in.-lbs. | 1.5 | Totally Enclosed Nonventilated (TENV) | 11 3/4" | 6" | 6 3/4" | 3/4" | 1 5/8" | 4" | F | 311° | IP55 | 0000000 | 000000000 | 000000000 | 000000 |
| 1/8 hp | 31 rpm @ 220 in.-lbs. | 1.6 | Totally Enclosed Nonventilated (TENV) | 12" | 5" | 6 3/8" | 5/8" | 1 1/2" | 3.13" | F | 311° | IP55 | 0000000 | 00000000 | 000000000 | 00000 |
| 1/8 hp | 61 rpm @ 113 in.-lbs. | 1.6 | Totally Enclosed Nonventilated (TENV) | 12" | 5" | 6 3/8" | 5/8" | 1 1/2" | 3.13" | F | 311° | IP55 | 0000000 | 00000000 | 000000000 | 00000 |
| 1/8 hp | 167 rpm @ 43 in.-lbs. | 1.6 | Totally Enclosed Nonventilated (TENV) | 12" | 5" | 6 3/8" | 5/8" | 1 1/2" | 3.13" | F | 311° | IP55 | 0000000 | 00000000 | 000000000 | 00000 |