Lifter kits include a vacuum generator, cables, and cups. Check the status of your lifter and adjust the vacuum levels right on the lifter. The integrated vacuum sensor sends information about an item's position to your controller, as well as triggers LED status indicators that show whether the arm is picking it up or releasing it. These lifters have near-field communication (NFC), so you can use a smartphone to read data, instructions, and error messages when you’re near the arm. Lifters don’t have pinch points or sharp edges, so you can use them on robots that will be near people. They help you meet ISO/TS 15066 international safety standards. Rated IP40, they're protected from wires and other objects 1 mm or larger. They're configured to work with specific robot arms, so choose the kit that matches your arm's manufacturer and model. Lifters for FANUC CRX arms are FANUC approved, and lifters for Universal Robots (UR) arms are UR+ certified, so they've been tested to work seamlessly. Install the included software directly into your controller to program the lifter.

Use standard vacuum lifter kits to move small- and medium-sized items with curves, angles, and varied heights. They share information with your controller using both discrete I/O and IO-link communication. Discrete I/O communication is a wired connection between the lifter and the controller, while IO-link connects to an IO-link controller, which can communicate remotely over multiple networks. This remote connection shares more data than discrete I/O, so you can monitor energy use and predict when you'll need maintenance. Swap out or change the configuration using the parts listed here.

Miniature vacuum lifter kits are smaller and lighter than standard kits, so they won't weigh down your robot arm. However, the small size means they create less suction, so they're limited to smaller, lighter items than the standard kits. They use discrete I/O to communicate directly with your controller. Note: the additional parts listed here are not compatible with these kits.

Vacuum generators take electricity and create suction. They monitor the vacuum level, the position of your object, and the lifter's grip, and send this information to your robot controller. These generators don’t have pinch points or sharp edges, so you can use them on robots that will be near people. They help you meet ISO/TS 15066 international safety standards. Generators with hardwire connection have a terminal block for connecting it to your controller. To quickly plug and unplug from your controller, choose a generator with plug connection.

Robot tool mounts attach lifters to your robot's wrist. Some have standard ISO mounting patterns that match the patterns on most robot arms. If you don't see your robot model number listed, measure the bolt circle diameter to determine mounting compatibility.

Cup mounts connect cups to the vacuum generator. Cup mounts with a quick-release clamp make it easy to switch out cup assemblies. They're often used in job shops that switch tasks frequently.

Cup assemblies connect to the cup mount. Choose the number of cups on the assembly based on the items you're lifting. All assemblies include two styles of cups: flat cups work well with flat materials such as metal and cardboard, and cups with bellows that give you a tight hold on uneven workpieces. When your vacuum cups become worn or damaged, choose from our selection of vacuum cups.