Filter by
System of Measurement
Number of Poles
Voltage
Flexibility
Certification
Pin Material
Signal Type
Sleeve Material
Maximum Temperature
Cord Insulation Material
Electrical Connection
Export Control Classification Number (ECCN)
Minimum Temperature
Enclosure Rating
DFARS Specialty Metals
REACH
RoHS
High-Current Pin-and-Sleeve Cords
Send power from generators to keep the lights on and equipment running. These cords are often used to convey temporary power during outages or at trade shows and mobile job sites. Able to send currents above 250A, they’re commonly connected to power distribution panels and transfer switches. Push and twist to lock them in place, where they remain secure against high current loads, vibration, and pulling. They don’t require tools to connect or disconnect, making them convenient for short-term setups.
For outdoor use, these cords are rated NEMA 3R for protection from rain, snow, and sleet. They also resist sunlight, oil, and chemicals.
Cord | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wire Gauge  | Current, A | Voltage | No. of Poles | Lg., ft. | OD | Insulation Material | Temp. Range, °F | Environmental Rating | Color | Choose a Connection End Color | Each | |
Straight Male Plug × Straight Female Socket | ||||||||||||
| 2/0 | 300 | 600V AC | 1 | 25 | 0.68" | Chlorinated Polyethylene Plastic | -55° to 220° | NEMA 3R | Black | 000000 | 0000000 | |
| 4/0 | 405 | 600V AC | 1 | 25 | 0.8" | Chlorinated Polyethylene Plastic | -55° to 220° | NEMA 3R | Black | 000000 | 000000 | |