The insulation on these cords resists water, so they can be used outdoors.

Designed for indoor applications, these cords are often used to power appliances.

Run these cords through high-traffic areas that are dirty and greasy. They have a thick insulation that resists water, oil, and chemicals, and protects against abrasion.

Power multiple devices with one extension cord.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Keep power flowing in dirty areas with rubber-insulated cords that resist oil, water, and chemicals. A locking lever on the socket prevents your device from disconnecting.

The shielding blocks signal interference from nearby equipment and devices.

Transmit video to a single monitor.

Use this general purpose cable to supply power to equipment.

The insulation resists corrosive chemicals and salt water, and the wires in this cable are tin plated for corrosion resistance.

For high-heat applications such as furnaces and ovens, this cable's insulation withstands temperatures of 390° F and higher.

Often used to wire pendant switches, this cable hangs from an overhead connection. Also known as bus drop cable.

Weather-resistant insulation makes this cable suitable for outdoor use and direct burial without conduit.

Often used in automated applications such as robotics and cable carriers, this cable withstands continuous motion without degrading data or signal transmission.

Use this cable without conduit in automated applications—it meets crush and impact requirements for exposed runs in cable carriers, and withstands continuous motion without degrading data or signal transmission.

In addition to handling continuous movement, this cable withstands twisting up to 450° without degrading data or signal transmission. It's often used in welding robots and rotary tables.

Bend and flex this silicone-insulated cable in temperatures up to 350° F. It can keep moving in areas twice as hot as most other continuous-flex cables without degrading data or signal transmission.

This cable meets TC-ER crush and impact requirements for exposed runs in cable trays, so it can be used without conduit. It sends signal and data to operate, measure, or regulate automated equipment.

Keep water from damaging wires—this cable has a layer of absorbent material that traps moisture before it reaches the internal wires. It sends signal and data to operate, measure, or regulate automated equipment.

This cable is used in variable-frequency drive motors. It has shielding to block signal interference caused by voltage fluctuations and current spikes.

The metal armor on this cable acts as conduit to protect the internal wires. It's often used along the exterior of walls to carry power to outlet boxes. Also known as MC cable.

This cable has an uninsulated ground wire that touches the protective metal armor so it can be used for bonding and grounding. It's often used along the exterior of walls to carry power to outlet boxes. Also known as AC cable.

This cable is approved for use in vertical shafts and large facilities with multiple levels. It's often used for low-current circuits such as intercoms and security systems.

Wire multiple components in your security system using a single cable.

Prevent damage to wires for fire alarm systems, smoke detectors, and other critical circuits with this armored cable.

Often used to send signal and data to order pickers and cranes, this cable withstands continuous motion applications without degrading data or signal transmission.

This cable has twisted pairs of wires that cancel signal interference from multiple transmission lines. Use it for complex and high-speed data and signal transmission.

Often used in radio transmission, network connections, and digital audio feed, this cable transmits audio, video, and data signals.

Send data between computers, printers, servers, and switches.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it to send data between computers, servers, and switches.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. It has an oil-resistant insulation to protect wires as the cable moves from duct to equipment or machinery.

This cable withstands abrasion, oil, and the rough conditions found in welding applications.

Connect batteries in vehicles and generators.

Connect batteries in generators, forklifts, and other vehicles in corrosive environments. Also known as marine wire, this copper wire is tin plated to resist corrosion from salt water, battery acid, and oil.

More flexible than standard wire, this wire is often used for internal appliance wiring and machine tools. Also known as MTW wire.

Maintain a supply of Mil. Spec. wire in multiple colors.

This wire meets stringent military specifications for material quality.

Our most chemical-resistant wire—the PTFE insulation protects against most chemicals, solvents, and oil.

Nearly half the diameter and up to 40% lighter than standard wire of the same gauge and voltage, this wire fits in tight spaces.

Eliminate tangles—the slippery insulation on this wire won't catch on itself, other wires, or on rough surfaces.

With a slim PFA plastic insulation, this wire has the same heat resistance as standard high-temperature wire but its diameter is one-third the size for use in tight spaces.

Insulated with TPE, this wire won’t break down from oil, coolant, or chemicals, and it carries a strong signal even when repeatedly bent. This makes it great for greasy equipment on automated lines, such as lubricated cable carriers.

The thin strands in this wire have better fatigue resistance under repeated flexing than the strands in standard continuous-flex wire, so it will last longer.

Install this copper wire in conduit and cable trays throughout commercial and industrial buildings. It's also known as branch circuit wire.

Also known as photovoltaic (PV) wire, this wire won’t deteriorate from UV light when used outdoors. It’s often used in solar panels.

Keep multiple colors of wrap wire on hand to color code connections in circuit boards for easy identification.