Use these cords with computers, lab equipment, and office machines that have IEC connections.

Create secure, vibration-resistant connections on both ends—these cord splitters have a hospital-grade plug and locking sockets.

These cords work with any Milwaukee tool with a pin socket (Quik-Lok) connection.

The insulation resists water, oil, and chemicals, so these cords withstand dirty and greasy environments.

Designed for indoor use, these cords are often used to power appliances.

These self-coiling cords return to their retracted length after stretching for tangle-free storage.

Use these unshielded cords where signal interference is not a concern.

Often used in labs, storage facilities, and offices, the shielding blocks low to moderate signal interference from nearby equipment and devices. These cords have a flange on the socket end to mount them in a panel cutout.

Adapt your USB port to connect to a variety of other devices.

Stretch these cords out when you need extra length and their coiled design springs back when it’s not needed to make them smaller.

Connect devices such as computers, printers, and mobile devices.

Often used to connect multiple monitors to a single computer, these cords send video and audio to a display device.

Connect computers, servers, and switches in a fiber-optic network.

Transmit audio, video, and data signals over long distances with minimal signal loss.

Often used to wire pendant switches, this cable hangs from an overhead connection. Also known as bus drop cable.

Weather-resistant insulation makes this cable suitable for outdoor use and direct burial without conduit.

The metal armor on this cable acts as conduit to protect the internal wires. It's often used along the exterior of walls to carry power to outlet boxes. Also known as MC cable.

Connect low-current circuits such as intercoms and security systems to a building's electrical system in single-level facilities.

This cable is approved for use in vertical shafts and large facilities with multiple levels. It's often used for low-current circuits such as intercoms and security systems.

Prevent damage to wires for fire alarm systems, smoke detectors, and other critical circuits with this armored cable.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use in critical circuits such as fire alarms and smoke detectors.

Hook up speakers, intercoms, and other low-current devices to a building's communication wiring.

Often used in automated applications that require continuous motion, this cable sends data between computers, servers, and switches without degrading signal transmission.

Often used in electronic prototyping or in the interior of computers, this flat cable is ultra flexible with small-gauge wires so it fits in tight spaces.

This cable withstands abrasion, oil, and the rough conditions found in welding applications.

More flexible than standard wire, this wire is often used for internal appliance wiring and machine tools. Also known as MTW wire.

Our most chemical-resistant wire—the PTFE insulation protects against most chemicals, solvents, and oil.

Nearly half the diameter and up to 40% lighter than standard wire of the same gauge and voltage, this wire fits in tight spaces.

Eliminate tangles—the slippery insulation on this wire won't catch on itself, other wires, or on rough surfaces.

Rated to 50 volts AC/DC, this wire is often used in small electronics and robotics. It withstands temperatures of 390° F and greater.

When pulled lengthwise, this unshielded wire extends 40% and then returns to its original length, so it's useful for high-vibration applications.

Use this wire in automated applications that require 14,000 volts A/C or greater. It withstands continuous motion without degrading data or signal transmission.

The thin strands in this wire have better fatigue resistance under repeated flexing than the strands in standard continuous-flex wire, so it will last longer.

Also known as photovoltaic (PV) wire, this wire won’t deteriorate from UV light when used outdoors. It’s often used in solar panels.