Use these cords where ignitable gas and dust may be present. The industry designation is SEOOW, so the inner and outer insulation resists oil.

Hazardous location environmental ratings indicate whether manufacturers have included safety features in products to facilitate their safe use in a hazardous environment. Before selecting a product for a hazardous location, ensure it is rated for your environment. See About Hazardous Location Environmental Ratings.

Avoid the clutter of multiple extension cords and overcrowded outlet strips—these extension cords have outlet boxes spread evenly along their length. They’re great for powering temporary workstations and areas with few wall outlets, such as construction or maintenance sites.

Each outlet box has cord grips on both ends for a connection that isn’t easy to yank out. The cord grips also take strain off the cord if it’s bent or pulled. Insulated with rubber and SOOW designated, these cords resist breaking down from oil, water, and chemicals. They won’t tear if dragged along the ground, and their outlet boxes won’t crack if dropped.

Cords with six outlets have an outlet box at the end.

Cords with seven outlets can be attached to another cord, so you can extend the length of your run.

Keep personnel safe from electric shock with these cords. The industry desgination is SJTW, so the insulation resists water.

Cords with manual GFCI reset prevent unexpected start-up.

Cord with a power-indicating light have a light on the socket that illuminates when the cord has power.

Change the connection style between an outlet and your equipment.

NEMA 14-30 and NEMA 14-50 adapters are commonly used to charge electric vehicles.

Adapters with a power-indicating light have a light on the socket that illuminates when the adapter has power.

Use SJT adapters in dry or damp locations. STW and SJTW adapters have a water-resistant outer insulation. STOW and SJTOW adapters have an oil- and water-resistant outer insulation.

For technical drawings and 3-D models, click on a part number.

Power multiple devices from the same outlet with these splitters.

Two-outlet and three-outlet splitters plug into an outlet or extension cord. STOW splitters have an oil- and water-resistant insulation.

For technical drawings and 3-D models, click on a part number.

Provide power to multiple devices with these outlet strips. A circuit breaker prevents damage from current overload and short circuits.

The face of 360° outlets rotate a full circle.

Fasten mounting clips to a surface, and snap the channel on the back of outlet strips into the clips.

Keep personnel safe from electric shock with ground fault protection.

Flip-down covers protect outlets from dust when not in use.

Strips with an automatic reset immediately regain power after ground is established.

With a rubber housing, these outlet strips withstand drops and other impact.

Outlet strips with screw terminals allow you to attach your own power cord.

Bring power to workstations that are not near a wall—these poles mount from the ceiling. They are internally divided to accommodate power cable on one side and telephone and data cable on the other. Add phone jacks or RJ45 sockets to the knockouts to connect telephone and data cable, or run cable to equipment through the knockouts. Carpet/floor grippers hold fast on the flooring, so there’s no need to cut carpet or drill into the floor.

Install these extra-long strips onto the frame of an electrical cabinet. Screw the included mounting clips to the cabinet and snap the strips into the clips.