With a single cord, these splitters join two devices with M12 connectors to a distribution block or I/O module with M12 connectors. Often used with sensors and actuators, they send signals/power to your devices through one connection. Rated IP65, IP66K, and IP67, all stand up to dust, high-pressure washdowns, and brief submersion.

Caps (sold separately) protect connections when not in use.

For technical drawings and 3-D models, click on a part number.

Connect two devices to a distribution block or I/O module with just one cord. Often used with sensors and actuators, these splitters send power/signals to your devices through a single connection. Rated IP65, IP66K, and IP67 when mated, all stand up to dust, high-pressure washdowns, and brief submersion.

For technical drawings and 3-D models, click on a part number.

Plug these cords into a vehicle socket to charge devices that run on AC voltage. Also known as inverters or converters, they prevent damage from overloads.

Change the connection style between an outlet and your equipment.

NEMA 14-30 and NEMA 14-50 adapters are commonly used to charge electric vehicles.

Adapters with a power-indicating light have a light on the socket that illuminates when the adapter has power.

STW and SJTW adapters have a water-resistant outer insulation. STOW and SJTOW adapters have an oil- and water-resistant outer insulation.

For technical drawings and 3-D models, click on a part number.

Power multiple devices from the same outlet with these splitters.

Two-outlet and three-outlet splitters plug into an outlet or extension cord.Splitters with a 90° elbow plug sit flush against wall outlets to fit in tight spaces.

Use SJT and SPT-2 splitters in dry or damp locations. STW splitters have a water-resistant insulation. STOW splitters have an oil- and water-resistant insulation.

Splitters with a quick-release tab let you unplug devices by pressing down with your thumb.

For technical drawings and 3-D models, click on a part number.

The outlets on these reels have covers to keep out water and dust when not in use. They include an oil- and water-resistant extension cord that also acts as a power cord. Set the brake to prevent cords from unwinding.

Attach the wires in a power cord to these reels for a permanent connection, then plug an extension cord into the reel’s outlets. Outlet covers keep out water and dust when not in use. Set the brake to prevent cords from unwinding.

Provide power to multiple devices with these outlet strips. A circuit breaker prevents damage from current overload and short circuits.

Telephone connections connect to a land line. The face of 360° outlets rotate a full circle.

Surge suppression outlet strips protect against damage from voltage spikes. Surge rating indicates how much energy the outlet strip can absorb before it needs to be replaced; the higher the number, the better the protection.

Fasten mounting clips to a surface, and snap the channel on the back of outlet strips into the clips.

Keep personnel safe from electric shock with ground fault protection.

90° elbow plugs fit flush against a wall outlet, so they fit behind machinery or in areas where space is tight.

Outlet strips with a circuit breaker prevent damage from current overload and short circuits.

Flip-down covers protect outlets from dust when not in use.

Outlet strips with a manual reset prevent equipment from starting up unexpectedly after ground is established.

Filters between the outlets on these strips protect computers and other sensitive equipment from external signals that interfere with the equipment’s performance. A circuit breaker prevents damage from current overload and short circuits. Surge suppression protects devices from voltage spikes. The surge rating indicates how much energy the outlet strip can absorb before it needs to be replaced; the higher the number, the better the protection.

A combination of an outlet box, cord, and duct, these outlet strips minimize tripping hazards and protect the cord from damage. The cord extends two feet beyond the end of the duct. They have a 90° elbow plug that fits flush against a wall outlet, so they fit behind machinery or in areas where space is tight. Use tape with adhesive on both sides to secure duct.

Also known as hospital-grade outlet strips, these outlets have an extra-tight fit to prevent plugs from detaching. They are marked with a green dot. A circuit breaker prevents damage from current overload and short circuits.

Outlets strips with coiled cord can stretch to reach a power source, then return to a tight coil for tangle-free storage.

Mount these outlet strips to a desktop or workbench with the mounting hardware, or set them on a surface. The outlets have internal shutters to prevent the insertion of foreign objects. These outlet strips have a 90° elbow plug that fits flush against a wall outlet, so they fit behind machinery or in areas where space is tight. The plug also has an outlet on the back to connect equipment. Use the USB ports to charge mobile devices.

For technical drawings and 3-D models, click on a part number.

Mount these strips into standard 19” wide electronics racks, enclosures, and cabinets. All have a circuit breaker to prevent damage from current overload and short circuits.

Front outlets power external components. Rear outlets power components inside the cabinet.

No need for mounting hardware—these outlet strips have magnets on the back to stick to steel walls, cabinets, and other magnetic surfaces. Mount them off the ground to reduce tripping hazards in your facility. The magnets are rated for 25 lbs. of force, so they won’t accidentally get knocked down or pulled off. A circuit breaker prevents damage from current overload and short circuits.

When mated, connectors meet NEMA 6P for protection against corrosion and washdowns. All have a multiple-ring seal and rubber housing to keep out liquid. They resist heat, oil, and chemicals. A quarter turn locks them in place to remain secure in high-vibration applications and prevent accidental disconnection.

Plugs mate with female receptacles and female sockets with an attached cover.

Cord splitters power multiple devices from a single outlet.

For technical drawings and 3-D models, click on a part number.