Use these cords with computers, lab equipment, and office machines that have IEC connections.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

Create secure, vibration-resistant connections on both ends—these cord splitters have a hospital-grade plug and locking sockets.

Create a vibration-resistant connection—the socket on these cords securely locks onto any male receptacle and will not detach until manually unlocked.

The threaded ends on these cords seal out contaminants and resist coming loose from vibration in tough industrial environments and automated systems while sending power and signal to devices with M12 connections.

FDA compliant for direct contact with food, these cords are safe to use with 12 mm proximity switches, valves, and power supplies in food, beverage, and pharmaceutical applications.

With a single cord, these splitters join two devices with M12 connectors to a distribution block or I/O module with M12 connectors. Often used with sensors and actuators, they send signals/power to your devices through one connection.

With a higher maximum current than nano M8 and micro M12 cords, these mini cords are often used with automated systems, motors, and pumps.

Also known as pico cords, these cords are often used with low-current 8 mm proximity and photoelectric switches.

Connect two devices to a distribution block or I/O module with just one cord. Often used with sensors and actuators, these splitters send power/signals to your devices through a single connection.

Use these unshielded cords where signal interference is not a concern.

The M12 threaded connectors on these cords are more vibration resistant than RJ45 connectors.

Use these unshielded cords where signal interference is not a concern.

With Kevlar-reinforced armor, these USB cords stand up to frequent use and bending better than standard USB cords.

Connect devices such as computers, printers, and mobile devices.

Use this general purpose cable to supply power to equipment.

This cable can be stretched by about 40% and return to its original length, making it useful for applications where cable is in motion. It's often sewn into garments or used with equipment that must be worn.

The insulation resists corrosive chemicals and salt water, and the wires in this cable are tin plated for corrosion resistance.

For high-heat applications such as furnaces and ovens, this cable's insulation withstands temperatures of 390° F and higher.

Often used to wire pendant switches, this cable hangs from an overhead connection. Also known as bus drop cable.

Weather-resistant insulation makes this cable suitable for outdoor use and direct burial without conduit.

Often used in automated applications such as robotics and cable carriers, this cable withstands continuous motion without degrading data or signal transmission.

Use this cable without conduit in automated applications—it meets crush and impact requirements for exposed runs in cable carriers, and withstands continuous motion without degrading data or signal transmission.

In addition to handling continuous movement, this cable withstands twisting up to 450° without degrading data or signal transmission. It's often used in welding robots and rotary tables.

Bend and flex this silicone-insulated cable in temperatures up to 350° F. It can keep moving in areas twice as hot as most other continuous-flex cables without degrading data or signal transmission.

This cable meets TC-ER crush and impact requirements for exposed runs in cable trays, so it can be used without conduit. It sends signal and data to operate, measure, or regulate automated equipment.

Keep water from damaging wires—this cable has a layer of absorbent material that traps moisture before it reaches the internal wires. It sends signal and data to operate, measure, or regulate automated equipment.

Nearly two-thirds the diameter of standard control cable, this cable fits in tight spaces. It sends signal and data to operate, measure, or regulate automated equipment.

The metal armor on this cable acts as conduit to protect the internal wires. It's often used along the exterior of walls to carry power to outlet boxes. Also known as MC cable.

Also known as fixture whips, this cable has locknuts and fittings attached to the protective metal armor to secure it to a knockout. It's often used to connect light fixtures.

After extending to full length to provide added reach, this cable retracts and self-coils for tangle-free storage. It's often used with low-current circuits such as microphones and headsets.

This cable is approved for use in vertical shafts and large facilities with multiple levels. It's often used for low-current circuits such as intercoms and security systems.

Hook up thermostats, air-conditioning units, and other low-voltage equipment.

This cable is approved for use in vertical shafts and large facilities with mulitple levels for critical circuits such as fire alarms and smoke detectors.

Hook up speakers, intercoms, and other low-current devices to a building's communication wiring.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it to send data between computers, servers, and switches.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. It has an oil-resistant insulation to protect wires as the cable moves from duct to equipment or machinery.

This cable withstands abrasion, oil, and the rough conditions found in welding applications.

Connect batteries in vehicles and generators.

Keep spools of vehicle wire in multiple colors on hand.

More flexible than standard wire, this wire is often used for internal appliance wiring and machine tools. Also known as MTW wire.

Maintain a supply of Mil. Spec. wire in multiple colors.

This wire meets stringent military specifications for material quality.

Our most chemical-resistant wire—the PTFE insulation protects against most chemicals, solvents, and oil.

Nearly half the diameter and up to 40% lighter than standard wire of the same gauge and voltage, this wire fits in tight spaces.

Eliminate tangles—the slippery insulation on this wire won't catch on itself, other wires, or on rough surfaces.

Rated to 50 volts AC/DC, this wire is often used in small electronics and robotics. It withstands temperatures of 390° F and greater.

Insulated with TPE, this wire won’t break down from oil, coolant, or chemicals, and it carries a strong signal even when repeatedly bent. This makes it great for greasy equipment on automated lines, such as lubricated cable carriers.

The thin strands in this wire have better fatigue resistance under repeated flexing than the strands in standard continuous-flex wire, so it will last longer.

The EPDM insulation on this wire won’t become brittle or crack from sunlight, humidity, rain, temperature changes, abrasion from dirt and debris, and other rough outdoor conditions.

Keep multiple colors of wrap wire on hand to color code connections in circuit boards for easy identification.

This wire wraps around a post terminal on a circuit board to make an electrical connection, eliminating the need for soldering.