From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications.

The textured surface hides fingerprints and dents. This material is widely used in decorative applications, such as partitions and handrails.

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

The same steel used in automobile bodies, this AHSS (advanced high-strength steel) allows you to fabricate high-strength parts using thinner material than you could with other types of steel. It is formable, weldable, and more economical than alloy steel.

4130 alloy steel has a low carbon content that provides good weldability. It's often used for gears, fasteners, and structural applications.

Easier to machine than 52100 alloy steel rods, these extremely hard and wear-resistant tubes are often used to create bearings, bushings, and other cylindrical parts that are under constant stress. They’re also known as chrome steel.

The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

An anodized coating forms a bond to the inside, outside, and ends of these tubes to improve wear and corrosion resistance.

The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

The outside of these tubes is anodized to improve wear and corrosion resistance.

While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed, such as for gears, shafts, and fasteners. It offers similar performance to 7075 aluminum, but it’s not as strong.

3003 aluminum stands up to outdoor use, as well as exposure to chemicals. It offers a good combination of strength, formability, and weldability. It's often used for storage tanks, heat exchangers, and general sheet metal work.

The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.

The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.

With 99.99% copper content, 101 copper has higher purity than 110 copper, resulting in superior electrical conductivity. It's commonly called OFE and OFHC copper. Use it in electrical applications, such as for coaxial cables and terminal lugs.

The addition of phosphorus makes 122 copper easier to weld and braze than 110 copper. It has excellent resistance to corrosion caused by water, soil, and weather, making it the go-to material for plumbing and underground applications.

Powdered bronze is pressed and then impregnated with SAE 30 oil to make this material self-lubricating.

954 bronze contains a minimum of 10% aluminum for strength and weldability. It is also known as aluminum bronze. It's widely used for bearings, bushings, valve bodies, and worm gears. The strength of this material increases with heat treating.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

The addition of MDS gives these tubes exceptional wear resistance along with a self-lubricating surface. They're made of cast nylon 6, making them easier to machine and better electrical insulators than other MDS-filled nylon tubes.

A good choice for making sprockets and pulleys, these cast nylon 6 tubes withstand higher temperatures and are easier to machine than standard nylon 6/6 tubes.

In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

CPVC is just as chemical resistant as standard PVC Type 1 and can handle hotter temperatures up to 200° F.

Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.

This glass-filled PTFE is more rigid than standard PTFE for increased durability in high-stress applications.

This extruded acrylic offers similar performance as cast acrylic at a lower cost.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

Lighter than solid shafts, hollow shafts reduce your total system weight and allow you to run various media such as electrical wiring, compressed air tubing, coolants, or lubricants through the center.

A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.

Using nothing more than standard high-speed steel tooling, Garolite LE can be machined into intricate parts.

Garolite CE is often fabricated into parts where high strength is not required.

Rated for temperatures down to -450° F, this Garolite G-10 CR performs better in cryogenic applications than other glass epoxies.

More electrically insulating than Garolite XX, these tubes are often machined into insulating washers, bushings, transformer spacers, and parts of terminal boards.

Mount these lightweight tubes to flat surfaces in place of aluminum to create structural frames, machinery components, and robotics.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

Use these round GPO3 fiberglass tubes for electrical applications in humid environments.

Hard fiber is the easiest composite to machine, making it good for creating custom parts. Also known as vulcanized fiber.

Protectively sheath materials, such as thermocouples, that move between hot and cold environments. Similar to nonporous alumina tubes, air and gas cannot pass through these mullite tubes.

These mica tubes resist temperatures up to 930° F. Also called muscovite mica.

Also called Pyrex and Schott glass, these glass tubes resist clouding and pitting and are highly chemical and heat resistant.

Neoprene is blended with EPDM and polyethylene for foam tubes that offer good resistance to water, sunlight, and oxidation.