Simple to use, these switches actuate with a quick push.

A housing seals in anything that could ignite flammable material, so you can use these switches where explosive gas, dust, and fibers may be. They actuate with a quick push.

The built-in contact block in these switches extends behind the panel half the depth of most other 22 mm switches, saving valuable space.

A base that lights up draws attention to emergency stops. When pushed, these switches immediately cut power.

Save space on your panel by using one switch for several tasks. These switches actuate with the push of a button.

More durable than standard metal switches, these can handle tough, repetitive use.

The face of these switches mounts flush against a panel, so they're easy to clean and hard to damage.

Save space on a panel by using one switch to perform multiple switching functions.

Use these switches where ignitable gas and dust may be present. Their contact blocks are UL listed for Class I, Division 2, Groups B, C, and D hazardous locations.

Send a signal from your circuit board with the push of a button.

Because these switches mount flush against a panel, they're easy to clean and hard to damage.

Immediately cut power with a single push.

Install in 8 mm dia. cutouts.

Install in 14 mm dia. cutouts.

Because these switches mount flush against a panel, they're easy to clean and hard to damage.

A protective plastic enclosure resists dents, chips, and cracks, so you can install these switches outside of panels.

With a stainless steel enclosure, these switches are more durable than aluminum and plastic. They're rated NEMA 4X for protection from corrosion and washdowns.

Use these switches where ignitable gas and dust may be present. They're rated for use in hazardous locations.

A red light flashes when the actuator is pushed, making it easy to see from a distance. They're rated IP65 for protection from washdowns.

Often used to trigger alarms, these switches have a recessed button to prevent accidental activation. Mount under desks or in other discrete locations to avoid drawing attention.

Save space in your setup—these switches double as handles on machines and equipment.

Mount these switches in an outlet box. Also known as palm-button switches, they have a large button that makes them easy to use even while wearing gloves.

Snap these switches onto your T-slotted framing rails—no need to drill or disassemble your existing structure.

Control machinery from a safe distance, or use these switches as call buttons.

Operate equipment from up to 330 feet away—these switches include a transmitter and a receiver that connects to equipment.

Control machinery such as cranes, hoists, or trolleys with a wireless switch. About the size of a cell phone, these switches fit in the palm of your hand.

Control cranes and other mobile machinery in dirty, outdoor, and wet environments without damaging your switch.

Choose an actuator and contact block to make your own 16 mm switch.

Choose an actuator and contact block to make your own 30 mm switch.

Tug on the cable anywhere along your line to immediately cut the flow of power. This multi-functional unit also sends a signal to restart machinery with the push of a button, doing the job of two units in one.

Combine a push-button actuator with a switching mechanism to build a complete switch.

Built to resist vibration and corrosion in harsh environments, these circuit breakers protect against overload and short circuits in low-voltage automotive and other electronic applications.

Protect against overload and short circuits in low-voltage automotive and other electronic applications.

Small enough to fit in tight spaces, these circuit breakers mount through panels and are UL 489-rated for branch circuit protection.