Using a low-current signal, these relays are often used to control small motors and heaters.

Fit these relays where standard spade-terminal relays are too big.

Isolate input and output circuits to prevent damage from voltage spikes, reduce signal interference, and amplify signal.

With no moving parts, these solid state relays last longer, switch faster, and are quieter than mechanical relays. They interface between your controller and components to isolate input and output circuits, which protects components from voltage spikes, amplifies the relay’s signal, and reduces interference for reliable transmission.

With no moving parts, these solid-state relays are fast switching and require less maintenance, last longer, and are quieter than mechanical switches.

Use these relays with industrial automation systems, security and emergency lighting, and small motors.

Smaller than relays with electrical wiring, these relays fit in compact devices. Mount them through holes on circuit boards with their solder pin terminals.

Suitable for DC-powered equipment such as forklifts, floor scrubbers, and trucks.

An extended housing shields the terminals on these relays from weather.

With no moving parts, these solid state relays require less maintenance and last longer, switch faster, and are quieter, than mechanical relays. Also known as automotive relays.

A single, momentary input voltage switches these relays and locks them in position, so they don't require a constant input voltage to stay on or off.

A NEMA 4X enclosure protects these relays from washdowns, dirt, and corrosion.

An enclosure covers the terminals on these relays to help prevent damage from dust or accidental bumps.

Reduce connection errors on circuit boards that control machine guards and other safety devices. These relays take up less space on a board than those with electrical wiring because their solder pin terminals mount directly through circuit board holes.

Send a signal to turn equipment on and off from up to 150 feet away without having to run electrical wire. These relays have an enclosure to protect the terminals from dust and accidental bumps.

Safeguard your equipment against overheating, wear, and malfunction from a spike or dip in voltage.

Monitor phase, voltage, and frequency at the same time to protect motors, generators, and other three-phase circuits from burning out or overheating.

Remotely control these relays through an app on your smartphone—they simultaneously monitor phase, voltage, and frequency.

With a built-in web server, these relays can be remotely controlled over any IP network, including the Internet.

Often used to regulate the speed of AC fans or keep a heater at a set temperature, these relays connect directly to sensors to calculate and adjust output power. This allows you to use an analog input without converting it to a digital signal to control output power.

Split run time between two devices—these relays automatically alternate between them.

Attach these relays to a flat surface using the mounting hole. They have no moving parts, so compared to mechanical switches, they require less maintenance, last longer, and are quieter.

Turn machinery, such as paint and conveyor lines, on and off after a set period of time.

Reduce voltage fluctuations and stress on shafts and bearings when starting up three-phase motors. These timer relays start with motor contacts in a star configuration, then switch to a delta configuration after a set delay.

Considered solid state because they don’t have any moving parts, these timer relays last longer, switch faster, and are quieter than mechanical relays. They interface between your controller and components to isolate input and output circuits, preventing damage to your components from voltage spikes, amplifying the relay's signal, and reducing signal interference. They have multiple timing functions, so you don’t need to swap out your relay if you want to change their function.

Install these relays in a panel cutout or plug them into a relay socket. Unlike mechanical relays, these solid state relays have no moving parts, so they require less maintenance and last longer, are quieter, and switch faster.

Protect components from voltage spikes while amplifying the relay’s signal and reducing interference for reliable transmission—these relays interface between your controller and system components to isolate the input and output circuits. They have multiple timing functions, so you don’t need to swap out your relay if you want to change their function.

Smaller than other PLCs, these controllers save space in your control cabinet. They combine the functionality of a relay, timer relay, and switch in one unit, so you can program simple automation jobs.

Upgrade motor starters that use thermal overload protection with these solid-state overloads—they don't use heating elements, so enclosure ventilation and cooling is not required.

Use the mounting holes to attach monitors to a flat surface.

To prevent accidents, these switches won’t let your machine start running unless two people in different locations coordinate control.