Filter by
Maximum Rotation Speed
Torque
Rotation Speed
Maximum Torque
OD
Clutch Type
Shaft Mount Type
For Shaft Misalignment Type
Overall Length
Drive Type
Material
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Contactless Magnetic Electric Brakes
 |
Create drag to slow or stop the motion of your drive system using magnetic force. Because torque is transmitted by magnetic force without contact, there is no wear, so these brakes give you accurate, repeatable braking. Also known as electric hysteresis brakes, they are often used in tensioning, holding, and stopping applications. The brake engages when the power is on and releases when it is off. The amount of electrical current determines the amount of torque that is applied by the brake. Use these brakes with a current-limiting transformer.
Keyway | Mounting Hole | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shaft Dia. | Max. Torque, in·lbf | Max. Rotation Speed, rpm | OD | Overall Lg. | Shaft Type | Wd. | Dp. | Electric Brake Type | Drive Direction | Electrical Connection Type | Wire Lead Lg. | Voltage, V DC | Thread Size | Thread Pitch, mm | Each | |||
Through Shaft | ||||||||||||||||||
| 0.118" | 0.2 | 1,990 | 1 1/4" | 1 5/8" | Round | — | — | Power On | Clockwise and Counterclockwise | Hardwire | 18" | 24 | M2.5 | 0.45 | 7758T11 | 0000000 | ||
| 0.197" | 0.8 | 1,200 | 1 13/16" | 2" | D-Profile | — | — | Power On | Clockwise and Counterclockwise | Hardwire | 18" | 24 | M2.5 | 0.45 | 7758T12 | 000000 | ||
| 0.197" | 1.3 | 760 | 2" | 2 1/8" | D-Profile | — | — | Power On | Clockwise and Counterclockwise | Hardwire | 18" | 24 | M3 | 0.5 | 7758T13 | 000000 | ||
| 0.276" | 3.5 | 570 | 2 3/8" | 3" | D-Profile | — | — | Power On | Clockwise and Counterclockwise | Hardwire | 18" | 24 | M4 | 0.7 | 7758T14 | 000000 | ||
| 0.394" | 11 | 590 | 3 5/8" | 4" | D-Profile | — | — | Power On | Clockwise and Counterclockwise | Hardwire | 18" | 24 | M4 | 0.7 | 7758T15 | 000000 | ||
| 0.472" | 19 | 500 | 4 7/16" | 4 7/8" | Keyed | 0.158" | 0.098" | Power On | Clockwise and Counterclockwise | Hardwire | 18" | 24 | M5 | 0.8 | 7758T16 | 000000 | ||
| 0.59" | 32 | 420 | 5 7/16" | 5 1/8" | Keyed | 0.197" | 0.124" | Power On | Clockwise and Counterclockwise | Hardwire | 18" | 24 | M5 | 0.8 | 7758T17 | 00000000 | ||
Electric One-Way Clutches
Friction Engagement
 |
Through Shaft—Through-shaft clutches regulate torque transmission between an input shaft and a mounted component.
Clockwise Drive | Counterclockwise Drive | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Shaft Type | Max. Torque, in·lbf | Max. Rotation Speed, rpm | OD | Overall Lg. | Electric Clutch Type | Electrical Connection Type | Shaft Mount Type | Wire Lead Lg. | Voltage, V DC | Current, amp | Each | Current, amp | Each | ||||
Through Shaft | ||||||||||||||||||
| 1/4" | Round | 30 | 1,400 | 1 1/4" | 1 1/8" | Power On | Hardwire | Spring Pin | 15" | 24 | 0.14 | 5156T41 | 000000 | 0.24 | 5156T45 | 000000 | ||
| 5/16" | Round | 30 | 1,400 | 1 1/4" | 1 1/8" | Power On | Hardwire | Spring Pin | 15" | 24 | 0.14 | 5156T42 | 00000 | 0.24 | 5156T46 | 00000 | ||
| 3/8" | Round | 75 | 1,400 | 1 3/4" | 1 1/2" | Power On | Hardwire | Spring Pin | 18" | 24 | 0.14 | 5156T43 | 000000 | 0.24 | 5156T23 | 000000 | ||
| 1/2" | Round | 75 | 1,400 | 1 3/4" | 1 1/2" | Power On | Hardwire | Spring Pin | 18" | 24 | 0.14 | 5156T44 | 000000 | 0.24 | 5156T24 | 000000 | ||
Soft-Start Centrifugal Clutches
Friction Engagement
 |  |  |
Shaft-to-Shaft with Engagement Springs | Shaft-to-Shaft with Support Rollers | Through Shaft with Support Rollers and Pulley |
Shaft-to-Shaft—Shaft-to-shaft clutches also act as a shaft coupling, allowing you to regulate torque transmission between two shafts.
Through Shaft—Through-shaft clutches regulate torque transmission between an input shaft and a mounted component.
Support Rollers—Clutches with support rollers are quieter and last longer than other centrifugal clutches because the contact points are supported by urethane rollers to prevent slipping.
With Pulley—Clutches with a pulley come ready to install a V-belt.
Set-Screw Shaft Mount—Clutches that mount to shafts with set screws bite into your shaft when tightened to hold it.
Misalignment Capability | Clockwise-and-Counterclockwise Drive | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Shaft Type | Engagement Speed, rpm | Max. Power, hp | Max. Rotation Speed, rpm | Pitch Dia. | For Belt Trade Size | Parallel | Angular | OD | Overall Lg. | Keyway Wd. × Keyway Dp. | Material | Shaft Mount Type | Each | |||
Shaft-to-Shaft with Engagement Springs | |||||||||||||||||
| 5/8" | Keyed | 830 | 13 | 3,600 | — | — | 0.003" | 0.25° | 4 3/16" | 2 1/2" | 3/16" × 3/32" | Steel | Set Screw | 4402N111 | 0000000 | ||
| 3/4" | Keyed | 830 | 13 | 3,600 | — | — | 0.003" | 0.25° | 4 3/16" | 2 1/2" | 3/16" × 3/32" | Steel | Set Screw | 4402N112 | 000000 | ||
| 1" | Keyed | 830 | 13 | 3,600 | — | — | 0.003" | 0.25° | 4 3/16" | 2 1/2" | 1/4" × 1/8" | Steel | Set Screw | 4402N113 | 000000 | ||
Shaft-to-Shaft with Support Rollers | |||||||||||||||||
| 1/2" | Round | 1,100 | 7.5 | 1,750 | — | — | — | — | 3 63/64" | 3 19/64" | — | Steel | Set Screw | 4402N121 | 000000 | ||
| 5/8" | Keyed | 1,100 | 7.5 | 1,750 | — | — | — | — | 3 63/64" | 3 19/64" | 3/16" × 3/32" | Steel | Set Screw | 4402N122 | 000000 | ||
| 3/4" | Keyed | 1,100 | 7.5 | 1,750 | — | — | — | — | 3 63/64" | 3 19/64" | 3/16" × 3/32" | Steel | Set Screw | 4402N131 | 000000 | ||
| 1" | Keyed | 1,100 | 7.5 | 1,750 | — | — | — | — | 3 63/64" | 3 17/64" | 1/4" × 1/8" | Steel | Set Screw | 4402N132 | 000000 | ||
Through Shaft with Support Rollers and Pulley | |||||||||||||||||
| 5/8" | Keyed | 1,100 | 7.5 | 1,750 | 2.8" | 4L, A | — | — | 3 63/64" | 1 7/8" | 3/16" × 3/32" | Steel | Set Screw | 4402N141 | 000000 | ||
| 5/8" | Keyed | 1,100 | 7.5 | 1,750 | 3.3" | 4L, A | — | — | 3 63/64" | 1 7/8" | 3/16" × 3/32" | Steel | Set Screw | 4402N151 | 000000 | ||
| 3/4" | Keyed | 1,100 | 7.5 | 1,750 | 2.8" | 4L, A | — | — | 3 63/64" | 1 7/8" | 3/16" × 3/32" | Steel | Set Screw | 4402N142 | 000000 | ||
| 3/4" | Keyed | 1,100 | 7.5 | 1,750 | 3.3" | 4L, A | — | — | 3 63/64" | 1 7/8" | 3/16" × 3/32" | Steel | Set Screw | 4402N152 | 000000 | ||
 |
Includes | Each | ||
|---|---|---|---|
| Four Green Springs (830 RPM Engagement), Four Red Springs (1200 RPM Engagement), Four Orange Springs (1800 RPM Engagement) | 4402N11 | 000000 |
Electric Clutches for Face-Mount Motors
 |
Designed to mount directly to a NEMA face-mount motor, these clutches let you electrically control when to transmit power without turning off your motor. When you remove power to these clutches, they stop power transmission by disconnecting your motor's load. To the other side, attach a gearbox or couple a gear, sprocket, pulley, or other component.
Friction Engagement
Clockwise-and-Counterclockwise Drive | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Torque, ft·lbf | Max. Power, hp | Max. Rotation Speed, rpm | For Motor Frame Size | OD | Overall Lg. | Electric Clutch Type | Electrical Connection Type | Shaft Dia. | Keyway Wd. × Keyway Dp. | Material | Shaft Mount Type | Wire Lead Lg. | Voltage, V DC | Certification | Current, amp | Each | |||
Through Shaft | |||||||||||||||||||
| 16 | 3/4 | 3,600 | NEMA 48Y, NEMA 56C | 6 3/4" | 6 3/4" | Power On | Hardwire | 5/8" | 3/16" × 3/16" | Steel | Set Screw | 36" | 90 | UL Listed, C-UL Listed | 0.20 | 4406N101 | 000000000 | ||
| 30 | 3 | 3,600 | NEMA 48Y, NEMA 56C | 6 3/4" | 6 3/4" | Power On | Hardwire | 5/8" | 3/16" × 3/16" | Steel | Set Screw | 36" | 90 | UL Listed, C-UL Listed | 0.23 | 4406N102 | 00000000 | ||
 |
Clutch controllers (sold separately) convert an AC input into a DC output to engage and disengage these clutches. They mount inside an electrical enclosure (sold separately).
Input | Output | ||||||||
|---|---|---|---|---|---|---|---|---|---|
Voltage, V AC | Frequency, Hz | Voltage, V DC | Current, amp | Wire Lead Lg. | Temp. Range, ° F | Certification | Each | ||
| 120 | 50/60 | 90 | 0.8 | 5 1/2" | -20 to 110 | UL Listed, C-UL Listed | 4406N105 | 0000000 | |
 |
Electrical enclosures (sold separately) attach directly to these clutches to protect wiring from dust and moisture.
No. of Knockouts | Knockout Trade Size | Lg. | Wd. | Ht. | Finish | Material | Enclosure Rating | Certification | Each | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2 | 1/2 | 2 1/4" | 3 1/4" | 2 3/16" | Galvanized | Steel | NEMA 4 | UL Listed, C-UL Listed | 4406N103 | 000000 |
 |
Material | Includes | Each | ||
|---|---|---|---|---|
| Steel | Four Mounting Screws, Two Covers, Two Gaskets | 4406N104 | 000000 |
One-Way Clutches
Roller Engagement—Knurled Hub
 |
Roller clutches are best for low- to medium-torque transfer in overrunning and indexing applications.
Clutches with a knurled hub can be press fit into the bore of your component.
Through Shaft—Through-shaft clutches regulate torque transmission between an input shaft and a mounted component.
Set-Screw Shaft Mount—Clutches that mount to shafts with set screws bite into your shaft when tightened to hold it.
Shaft | Hub | Clockwise Drive | Counterclockwise Drive | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Shaft Type | Max. Torque, ft·lbf | Max. Rotation Speed, rpm | OD | Overall Lg. | Material | Keyway Wd. × Keyway Dp. | Mount Type | Dia. | Lg. | Each | Each | ||||
Through Shaft | ||||||||||||||||
| 1/4" | Round | 0.83 | 5,000 | 15/16" | 31/32" | Steel | — | Set Screw | 5/8" | 9/32" | 4550N41 | 0000000 | 4550N42 | 0000000 | ||
| 3/8" | Keyed | 1.25 | 5,000 | 1 3/16" | 1" | Steel | 3/32" × 3/64" | Set Screw | 9/16" | 3/8" | 4550N43 | 000000 | 4550N44 | 000000 | ||
| 1/2" | Keyed | 4.16 | 2,000 | 1 1/2" | 1 9/32" | Steel | 1/8" × 1/16" | Set Screw | 7/8" | 1/2" | 4550N45 | 000000 | 4550N46 | 000000 | ||
Roller Engagement—Keyed Hub
 |
Roller clutches are best for low- to medium-torque transfer in overrunning and indexing applications.
Clutches with a keyed hub let you slip on your component.
Through Shaft—Through-shaft clutches regulate torque transmission between an input shaft and a mounted component.
Slip-Fit Shaft Mount—Clutches that mount to shafts with a slip fit must be secured with a shaft collar or in some other way that prevents them from moving along the length of your shaft.
Shaft | Hub | Clockwise Drive | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Shaft Type | Max. Torque, ft·lbf | Max. Rotation Speed, rpm | OD | Overall Lg. | Material | Keyway Wd. × Keyway Dp. | Mount Type | Dia. | Lg. | Keyway Wd. × Keyway Dp. | Each | |||
Through Shaft | |||||||||||||||
| 1/4" | Keyed | 5 | 1,800 | 1 5/8" | 1 15/16" | Steel | 1/16" × 1/32" | Slip Fit | 7/8" | 13/16" | 3/16" × 3/32" | 4550N11 | 0000000 | ||
| 3/8" | Keyed | 14 | 1,800 | 2" | 2 1/8" | Steel | 3/32" × 3/64" | Slip Fit | 1 1/4" | 1" | 3/16" × 3/32" | 4550N12 | 000000 | ||
| 1/2" | Keyed | 14 | 1,800 | 2" | 2 1/8" | Steel | 1/8" × 1/16" | Slip Fit | 1 1/4" | 1" | 3/16" × 3/32" | 4550N13 | 000000 | ||
| 5/8" | Keyed | 28 | 1,500 | 2 5/8" | 2 23/32" | Steel | 3/16" × 3/32" | Slip Fit | 1 3/8" | 1 5/16" | 3/16" × 3/32" | 4550N14 | 000000 | ||
| 3/4" | Keyed | 100 | 1,000 | 3 5/8" | 3 11/32" | Steel | 3/16" × 3/32" | Slip Fit | 2 1/4" | 1 1/2" | 3/8" × 3/16" | 4550N15 | 000000 | ||
| 1" | Keyed | 100 | 1,000 | 3 5/8" | 3 11/32" | Steel | 1/4" × 1/8" | Slip Fit | 2 1/4" | 1 1/2" | 3/8" × 3/16" | 4550N16 | 000000 | ||
| 1 1/4" | Keyed | 100 | 1,000 | 3 5/8" | 3 11/32" | Steel | 1/4" × 1/8" | Slip Fit | 2 1/4" | 1 1/2" | 3/8" × 3/16" | 4550N17 | 000000 | ||
| 1 1/2" | Keyed | 200 | 800 | 4 1/2" | 4 1/2" | Steel | 3/8" × 3/16" | Slip Fit | 3" | 2 1/16" | 3/8" × 3/16" | 4550N18 | 000000 | ||
Sprag Engagement—Keyed Hub
 |
Sprag clutches handle higher torque than roller clutches because they have more contact points. This makes them best for backstopping applications.
Clutches with a keyed hub let you slip on your component.
Through Shaft—Through-shaft clutches regulate torque transmission between an input shaft and a mounted component.
Set-Screw Shaft Mount—Clutches that mount to shafts with set screws bite into your shaft when tightened to hold it.
Max. Rotation Speed, rpm | Shaft | Hub | Clockwise Drive | Counterclockwise Drive | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Shaft Type | Max. Torque, ft·lbf | Inner-Race | Outer-Race | OD | Overall Lg. | Material | Keyway Wd. × Keyway Dp. | Mount Type | Dia. | Lg. | Keyway Wd. × Keyway Dp. | Each | Each | ||||
Through Shaft | ||||||||||||||||||
| 5/8" | Keyed | 110 | 1,950 | 900 | 2" | 2 3/4" | Steel | 3/16" × 3/32" | Set Screw | 1 1/4" | 1" | 3/16" × 3/32" | 4550N32 | 000000000 | 4550N31 | 000000000 | ||
| 3/4" | Keyed | 300 | 1,950 | 750 | 2.88" | 3.19" | Steel | 3/16" × 3/32" | Set Screw | 1 3/8" | 1 5/16" | 3/16" × 3/32" | 4550N34 | 00000000 | 4550N33 | 00000000 | ||
| 1" | Keyed | 450 | 1,650 | 600 | 3 1/4" | 3.56" | Steel | 1/4" × 1/8" | Set Screw | 1 3/4" | 1 7/16" | 1/4" × 1/8" | 4550N36 | 00000000 | 4550N35 | 00000000 | ||
| 1 1/4" | Keyed | 675 | 1,250 | 350 | 3 3/4" | 3 1/2" | Steel | 5/16" × 5/32" | Set Screw | 2 1/4" | 1 7/16" | 5/16" × 5/32" | 4550N38 | 00000000 | 4550N37 | 00000000 | ||
Sprag Engagement—Flush Hub
 |  |
Covers |
 |  |
Torque Arm Shown Installed | Torque Arms |
Sprag clutches handle higher torque than roller clutches because they have more contact points. This makes them best for backstopping applications.
Clutches with a flush hub have a precision ground outer race, so they can be press fit directly into a component and positioned anywhere along the length of your shaft. They also have mounting holes on their face you can use to secure your component or an anti-rotation device, such as a torque arm, for a different backstopping setup.
Through Shaft—Through-shaft clutches regulate torque transmission between an input shaft and a mounted component.
Slip-Fit Shaft Mount—Clutches that mount to shafts with a slip fit must be secured with a shaft collar or in some other way that prevents them from moving along the length of your shaft.
Covers—Covers protect you from rotating equipment when the clutch is mounted to the end of the shaft.
Torque Arms—Clutch torque arms work as an anchor for clutches in backstopping applications. Mount to the outer race of your clutch and a stationary piece of equipment.
Clutches | Covers | Torque Arms | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Rotation Speed, rpm | Shaft | Clockwise or Counterclockwise Drive | |||||||||||||||
For Shaft Dia. | For Shaft Type | Max. Torque, ft·lbf | Inner-Race | Outer-Race | OD | Overall Lg. | Material | Keyway Wd. × Keyway Dp. | Mount Type | Each | Each | Each | |||||
Through Shaft | |||||||||||||||||
| 3/4" | Keyed | 300 | 2,800 | 850 | 3 1/2" | 2 3/4" | Steel | 3/16" × 3/32" | Slip Fit | 4550N21 | 000000000 | 4550N201 | 0000000 | 4550N301 | 0000000 | ||
| 1" | Keyed | 1,175 | 2,500 | 800 | 4 1/4" | 3 1/2" | Steel | 1/4" × 1/8" | Slip Fit | 4550N22 | 00000000 | 4550N202 | 000000 | 4550N302 | 000000 | ||
| 1 1/4" | Keyed | 1,175 | 2,500 | 800 | 4 1/4" | 3 1/2" | Steel | 1/4" × 1/8" | Slip Fit | 4550N23 | 00000000 | 4550N202 | 000000 | 4550N302 | 000000 | ||
| 1 1/2" | Keyed | 2,250 | 2,200 | 750 | 5 3/8" | 3 3/4" | Steel | 3/8" × 3/16" | Slip Fit | 4550N24 | 00000000 | 4550N203 | 000000 | 4550N303 | 000000 | ||
| 1 3/4" | Keyed | 2,250 | 2,200 | 750 | 5 3/8" | 3 3/4" | Steel | 3/8" × 3/16" | Slip Fit | 4550N25 | 00000000 | 4550N203 | 000000 | 4550N303 | 000000 | ||
Base-Mount AC Brake Motors
 |
 |  |
Unlike standard AC motors, these motors have an integrated brake that activates after a power loss to hold your equipment in place. They’re often used with conveyors to stop them from moving backwards after a power loss, and with hoists to prevent them from dropping a load. Mount their base to flat surfaces. Rated for continuous duty, these motors can run equipment that never turns off. Their shaft is keyed, and they come with key stock.
Totally Enclosed Fan-Cooled (TEFC) Motor Enclosure—These motors have a TEFC (totally enclosed fan-cooled) enclosure that protects better than an ODP (open dripproof) enclosure. They aren’t airtight, but they can be used in dirty, dusty, and wet environments. To keep the motor cool, the enclosure has an external fan that blows air over the outside of the motor.
Overall | Shaft | Insulation | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Power, hp | Max. Rotation Speed, rpm | Full Load Current | Inverter Rated | Motor Enclosure Type | Lg. | Wd. | Ht. | Dia. | Lg. | Ctr. to Base | Type | Base Type | Class | Max. Temp., ° F | Enclosure Rating | Each | |||
230V AC/460V AC, Three Phase | |||||||||||||||||||
NEMA 56 | |||||||||||||||||||
| 3/4 | 1,720 | 2.8 amp/1.4 amp | No | Totally Enclosed Fan-Cooled (TEFC) | 15 1/4" | 9 1/8" | 7 1/4" | 5/8" | 1 7/8" | 3 1/2" | Keyed | Welded | B | 266 | IP43 | 4952N11 | 000000000 | ||
| 1 | 1,760 | 3.2 amp/1.6 amp | Yes | Totally Enclosed Fan-Cooled (TEFC) | 17 1/4" | 9 1/8" | 7 1/4" | 5/8" | 1 7/8" | 3 1/2" | Keyed | Welded | B | 266 | IP43 | 4952N12 | 00000000 | ||
NEMA 145T | |||||||||||||||||||
| 1 1/2 | 1,750 | 4.4 amp/2.2 amp | No | Totally Enclosed Fan-Cooled (TEFC) | 18 1/8" | 9 1/8" | 6 3/4" | 7/8" | 2 1/4" | 3 1/2" | Keyed | Welded | B | 266 | IP43 | 4952N13 | 00000000 | ||
NEMA 145 | |||||||||||||||||||
| 2 | 1,740 | 5.8 amp/2.9 amp | Yes | Totally Enclosed Fan-Cooled (TEFC) | 18 5/8" | 9 1/8" | 7 3/4" | 7/8" | 2 1/4" | 3 1/2" | Keyed | Welded | F | 311 | IP43 | 4952N14 | 00000000 | ||
Face-Mount AC Brake Motors
 |  |
 |
A built-in brake engages to hold your equipment in place when these motors lose power, unlike standard AC motors. These motors are often used with conveyors to keep items in place after a power loss, and with hoists to prevent them from dropping a load. Also known as C-face motors, these bolt directly to your equipment. They’re rated for continuous duty, so they can run equipment that never turns off. Their shaft is keyed, and they come with a key stock.
Totally Enclosed Fan-Cooled (TEFC) Motor Enclosure—These motors have a TEFC (totally enclosed fan-cooled) enclosure that protects better than an ODP (open dripproof) enclosure. They’re not airtight, but they can be used in dirty, wet, and dusty environments. To keep the motor cool, the enclosure has an external fan that blows air over the outside of the motor.
Overall | Shaft | Insulation | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Power, hp | Max. Rotation Speed, rpm | Full Load Current | Inverter Rated | Motor Enclosure Type | Lg. | Wd. | Ht. | Dia. | Lg. | Ctr. to Base | Type | Class | Max. Temp., ° F | Enclosure Rating | Each | |||
230V AC/460V AC, Three Phase | ||||||||||||||||||
NEMA 56C | ||||||||||||||||||
| 3/4 | 1,720 | 2.8 amp/1.4 amp | No | Totally Enclosed Fan-Cooled (TEFC) | 15 3/8" | 8 7/8" | 7 1/4" | 5/8" | 1 7/8" | 3 1/2" | Keyed | B | 266 | IP54 | 4876N11 | 000000000 | ||
| 1 | 1,760 | 3.2 amp/1.6 amp | Yes | Totally Enclosed Fan-Cooled (TEFC) | 17 1/4" | 8 7/8" | 7 1/4" | 5/8" | 1 7/8" | 3 1/2" | Keyed | F | 311 | IP43 | 4876N12 | 00000000 | ||
NEMA 145TC | ||||||||||||||||||
| 1 1/2 | 1,750 | 4.8 amp/2.4 amp | Yes | Totally Enclosed Fan-Cooled (TEFC) | 18 5/8" | 8 7/8" | 7 1/4" | 7/8" | 2" | 3 1/2" | Keyed | F | 311 | IP43 | 4876N13 | 00000000 | ||
| 2 | 1,740 | 5.8 amp/2.9 amp | Yes | Totally Enclosed Fan-Cooled (TEFC) | 18 3/4" | 8 7/8" | 7 1/4" | 7/8" | 2" | 3 1/2" | Keyed | F | 311 | IP43 | 4876N14 | 00000000 | ||
