McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    9 Products

    Digital Electromagnetic Field Indicators

    Image of Product. Front orientation. Magnetic Field Indicators. Digital Electromagnetic Field Indicators.
    Measure the strength of magnetic fields, electric fields, and radio frequencies at the same time. To detect emissions, just point these meters at the electrical equipment you want to test, such as a cable. When they detect high levels that could damage sensitive equipment, an alert appears in red and an audible alarm sounds. Their color LCD display shows readings, bar graphs, and trending graphs.
    These indicators store up to 20 radio frequency readings. Send readings to your PC using a USB cable (not included).
    Measurement
    Unit
    Measures
    Measuring Range (Increments)
    Accuracy
    Frequency Bandwith
    Ht.
    Wd.
    Dp.
    Batteries
    Included
    Each
    Gauss, TeslasMagnetic Field Strength
    Electric Field Strength
    Radio Frequency Strength
    Magnetic Field Direction (3-Axis)    		0.02 G to 2 G (0.01 G)
    50 V/m to 2,000 V/m (1 V/m)
    0.03 V/m to 14.46 V/m (0.02 V/m)    		±15%
    ±7%
    ±2 dB    		0.05 kHz to 0.06 kHz
    0.05 kHz to 0.06 kHz
    50,000 kHz to 3,500,000 kHz    		4 1/2"2 1/2"1"Yes7401N110000000

    High-Accuracy Flow and Temperature Transmitters

    Image of Product. Back orientation. Flow Transmitters. High-Accuracy Flow and Temperature Transmitters.
    Also known as magmeters, these transmitters use a magnetic field to measure flow rate and temperature with high accuracy. Because they use a magnetic field, they only work with conductive liquids, such as water. These transmitters, also known as transducers, convert measurements to an electrical signal that can be interpreted by receiving devices, such as remote displays and programmable logic controllers (PLCs) to monitor flow or control equipment. For your receiving device to interpret the signal, you will need to calibrate it for the measurement range and output signal of the transmitter. As flow or temperature increases, the output signal increases. These transmitters have one analog output for flow and another for temperature. They only give accurate readings within the rated measurement range. A digital display makes it easy to view readings and adjust settings at the source. Mount these transmitters inline with your pipe system. They measure flow correctly in any mounting orientation.
    These transmitters are calibrated with water. They can only be used with liquids with a conductivity of at least 20 µS/cm.
    Flow Range
    Flow Measurement
    Type
    Pipe
    Connections
    Gallons per
    Minute, gpm
    Liters per
    Minute, L/min
    End-to-End
    Lg.
    Accuracy
    Max. Pressure
    @ Temp.
    Temp. Range,
    ° F
    Input Voltage
    Range, V DC
    Mounting
    Position
    Field
    Recalibratable
    Enclosure
    Rating
    Each
    Two 4-20 mA Analog Transmitter Outputs—4-Pole M12 Connection Plugs
     
    316 Stainless Steel/Plastic/Polybutylene Body with 316 Stainless Steel Fitting
    Magnetic Induction1/2 NPT Female0.03 to 6.60.1 to 252 1/8"±2%225 psi @ 70° F0 to 17520 to 30Any AngleNoIP67
    		4397N1010000000
    Magnetic Induction3/4 NPT Female0.02 to 13.220.2 to 502 1/8"±2%225 psi @ 70° F0 to 17520 to 30Any AngleNoIP67
    		4397N102000000
    Magnetic Induction1 NPT Female0.1 to 26.40.2 to 1002 1/8"±2%225 psi @ 70° F0 to 17520 to 30Any AngleNoIP67
    		4397N103000000
    Magnetic Induction1 1/2 NPT Female1.3 to 79.35 to 3006 11/16"±0.8%225 psi @ 70° F0 to 17520 to 30Any AngleNoIP65, IP67
    		4397N10400000000
    Magnetic Induction2 NPT Female1.3 to 158.55 to 6007 1/16"±0.8%225 psi @ 70° F0 to 17520 to 30Any AngleNoIP65, IP67
    		4397N10500000000
     

    Electronic Polarity Testers

    Image of Product. Front orientation. Polarity Testers. Electronic Polarity Testers.
    Point this detector at your magnet and press the button. Red and green lights indicate north or south poles.
    Lg.
    Wd.
    Batteries
    Included
    Each
    5 1/2"1"Yes57255K71000000

    Digital Magnetic Field Indicators

    Image of Product. Front orientation. Magnetic Field Indicators. Digital Magnetic Field Indicators.
    Measure magnetic fields to determine electromagnetic interference and detect flaws in welded metal.
    Cannot Be Sold To—Product regulations restrict sales to the listed jurisdictions/areas.
    Measurement Unit
    Measuring Range
    (Increments)
    Accuracy
    Freq. Bandwith,
    kHz
    Batteries
    Included
    Includes
    Cannot Be
    Sold To
    Each
    Amperes per Meter, Gauss, Teslas0 G to 100 G (0.01 G)
    0 kG to 1 kG (0.1 G)
    0 kG to 10 kG (1 G)
    0 kG to 45 kG (10 G)    		±2%0 to 5YesAC Adapter, Detachable ProbeCalifornia1488T56000000000

    Magnetic Field Detectors

    Image of Product. Front orientation. Magnetic Field Indicators. Magnetic Field Detectors.
    Troubleshoot solenoid valves, check relays, and test permanent magnets by detecting if a magnetic field is present. Hold these detectors near a surface and they'll light up blue if they sense a magnetic field. They don't measure the strength or direction of the magnetic field.
    Detects
    Lg.
    Wd.
    Batteries
    Included
    Features
    Each
    Magnetic Fields6 1/4"1"YesFlashlight, Low Battery Indicator7246N11000000
    back to top