We will reply to your message within an hour.
More
Remotely monitor pressure in general purpose applications such as pumping and compressing systems.
Choose these transmitters when you need reliable pressure monitoring but not high accuracy.
Read pressure directly at the source and send data remotely with one device.
With a pressure range common to most compressed air systems, use these transmitters to monitor your system's air pressure.
At least four times as accurate as standard pressure transmitters, these transmitters are ideal for use in laboratories and analytical testing applications.
Remotely track your system's pressure readings from the convenience of a smartphone or tablet. Good for preventative maintenance and route-based monitoring, these battery-powered transmitters use Bluetooth to alert you when equipment requires your attention.
These transmitters automatically compensate for error introduced by vibration as well as temperature fluctuations, so you do not need to program your receiving device to correct for these factors. They convert pressure to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment.
Fine-tune the pressure range on these transmitters to account for changes in pressure readings over time.
Measure your equipment’s pressure and send the data directly to a development board or single-board computer. Also known as transducers, these transmitters convert pressure into an electrical I2C signal and transmit it to your board.
The diaphragm on these transmitters mounts flush with your system’s connection, leaving no room for thick liquids to clog or harden. They’re often used to monitor pressure in wastewater, paint, and adhesive-dispensing applications.
Adhere to safety standards and monitor pressure when working with high concentrations of oxygen.
Safely monitor liquid, gas, and steam pressure in hazardous locations with these transmitters. They meet NEC safety standards, so they protect against an explosion where flammable gases and vapors are present.
For use in sanitary applications such as food processing, these transmitters are 3-A certified.
Monitor and control pressure in portable HVAC systems, hydraulics, and oil and gas equipment. Unlike other pressure transmitters that measure the difference between your system and the atmosphere, these transmitters give measurements relative to zero pressure—regardless of altitude or temperature.
FM approved and CSA certified for use in hazardous locations, these transmitters monitor pressure where combustible fumes may be present.
Monitor your system’s pressure and vacuum from a smartphone or tablet via Bluetooth. These battery-powered transmitters send alerts if equipment requires your attention, so they’re good for preventative maintenance and route-based monitoring.
Convert both pressure and vacuum into an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment.
Monitor and control vacuum pumps, air compressors, and hydraulics while viewing readings and warnings on the display.
These transmitters automatically compensate for error introduced into both pressure and vacuum measurements by vibrations as well as temperature fluctuations, so you do not need to program corrections for these factors into your receiving device. They convert pressure and vacuum to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment.
Used in hazardous locations, these transmitters safely convert pressure and vacuum into an electrical signal to measure liquids, gases, and steam. NEC rated for safety, these transmitters are explosion proof, so they can be used in environments containing flammable gases and vapors.
Specifically made for compressed air and gas systems, these transmitters remotely monitor pressure and vacuum.
With an accuracy of ±0.25%, use these transmitters in applications that require highly accurate measurement of both pressure and vacuum, such as activating vacuum pumps.
Safe for use in environments where flammable gases and vapors are present, these transmitters measure the difference in pressure between two process lines without needing to program your receiving device to correct for errors. They meet NEC safety standards for protection against an explosion.
Account for changes in vacuum readings over time by fine-tuning the vacuum range on these transmitters.
Measure the difference in pressure between two process lines without needing to program your receiving device to correct for errors. These transmitters automatically compensate for errors caused by vibration and temperature changes.
With a digital display and selectable differential pressure ranges, these transmitters are a versatile alternative to transmitters with dial indicators.
Get the flexibility of a differential pressure transmitter and a switch in one. These transmitters can work as a traditional transmitter using an analog output but also have electronic switch outputs and IO Link compatibility, making them great for advanced automation applications.
View readings at the source with the dial indicator or remotely using a receiver—these transmitters measure the difference in pressure between two inputs in liquid applications.
Check the difference in air pressure between two inputs at the source using the dial indicator or remotely using a receiver.
At least twice as accurate as standard transmitters, these transmitters sense differential pressure at an accuracy of ±0.25%.
Remotely monitor the difference in air pressure between two inputs with these transmitters.
Used with pumps, cooling systems, and other liquid applications, these transmitters remotely measure the difference in pressure between two inputs.
A digital display allows for easy reading of measurements.
Check the vacuum levels in high-vacuum pumps, valves, and chambers with this compact gauge.
With an accuracy of ±0.05%, these have the highest accuracy of all our test gauges.
Gauges have an accuracy of ±0.25%.
Measure and transmit flow rate, pressure, and temperature of industrial gases, such as air, argon, CO2, and nitrogen, flowing through your system.
Achieve vacuum levels up to 1 x 10 -12 torr with these ultra-high-vacuum pumps.
Also known as load cells, these sensors measure and track the forces of your equipment by converting them into electrical signals.
Also known as junction and summing boxes, these hubs combine the measurements of multiple tension and compression force sensors together.
Keep equipment running and working conditions safe—these modules add air quality tracker capabilities to your development board.