These signs are lit from within for high visibility. Mount them flush against a wall, or use the included bracket to mount them perpendicular to a wall or ceiling.

Signs with a message on the front and back have the same message on both sides. Signs also included a solid back plate to display the message on one side.

Signs with a backup battery stay illuminated during power failures.

Signs with knockout arrows allow you to punch out one or both arrows to point to the exit.

Signs with red or green message color let you swap the color by sliding the color into the side of the fixture.

Plastic signs with a powder-coated steel frame are more durable than all-plastic signs.

Signs that cannot be sold to the listed areas are restricted by energy efficiency regulations.

These signs are rated NEMA 4X for corrosion resistance and washdown environments. They’re illuminated from within for high visibility.

Signs with a backup battery stay illuminated during power failures.

Signs cannot be sold to Canada due to energy efficiency requirements.

Illuminate outdoor exit paths and emergency assembly areas during power outages. Enclosed to withstand the elements, these lights are UL listed to resist rain, snow, and humidity. Their battery generates at least 90 minutes of power in compliance with UL 924 standards for backup lights. A low-voltage disconnect extends the life of the battery by switching it off before it’s fully drained. Direct light where it's needed by angling the adjustable heads.

All have a manual-test switch that lets you verify the battery and heads are working. Lights with automatic battery testing run a self-check once a month. An indicator tells you if they need maintenance.

Maximum distance between lights represents how far you can space out two lights without creating a dark zone.

When the power goes out, these lights turn on. They have adjustable heads that illuminate the path toward exits during outages. Rated UL 924, their battery provides at least 90 minutes of light. A low-voltage disconnect means the battery shuts off just before it’s fully drained, prolonging its overall lifespan. Lights cannot be sold to the listed areas due to energy efficiency regulations.

All have a manual-test switch that lets you verify the battery and heads are working. Lights with automatic battery testing run a self-check once a month. An indicator tells you if they need maintenance.

Style D-G lights are compatible with add-on heads. Run wiring between add-on heads and your backup light to extend lighting into stairwells, exits, and other remote areas. The greater the wattage of the add-on heads—and the more of them you use—the more they’ll reduce your light’s run time. Maximum wattage for add-on heads refers to the total wattage of add-ons you can use without pushing your light’s run time below 90 minutes.

Lights for use in damp locations withstand humid and moist conditions.

Maximum distance between lights represents how far you can space out two lights without creating a dark zone.