EMI-RFI Shielding Sleeving

Filter by

Sleeving Type

Performance

Interference Shielding

Material

Closure Method

Sleeving Construction

Expanded ID

Length

Maximum Temperature

Shield Type

REACH

Wall Thickness

RoHS

Color

DFARS Specialty Metals

Finish

Minimum Temperature

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

EAR99

Width

Liner Material

Carrier OD

End Closure Method

109 Products

Interference-Shielding Wraparound Wire Sleeving

Use this shielded sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. A sewn-in ground wire dissipates any stored charge. It provides good protection against abrasion. Wrap it around wire and cable without disconnecting them; sleeving has a slit along the entire length.

Overlap Closure

Sleeving with an overlap closure wraps over itself and stays closed without an adhesive strip or other closure, so it can be removed and reused.

Polyester Fabric—Polyester fabric sleeving has good abrasion and tear resistance.

Copper-Wire Shield—Sleeving with copper wire shielding is ultra-flexible, so it’s good for applications that require tight turns.

								Per Ft.
	ID	Wall Thk.	Temp. Range, ° F	Features	Color	Choose a Length, ft.		1-49	50-Up
Polyester Fabric with Copper-Wire Shield



		3/16"	1/32"	-75 to 300	Ground Wire	Black	1 , 5 , 10 , 25 , 50	6971T11	00000	00000


		5/16"	1/32"	-75 to 300	Ground Wire	Black	1 , 5 , 10 , 25 , 50	6971T12	0000	0000
		1/2"	1/32"	-75 to 300	Ground Wire	Black	1 , 5 , 10 , 25 , 50	6971T13	0000	0000
		3/4"	1/32"	-75 to 300	Ground Wire	Black	1 , 5 , 10 , 25 , 50	6971T14	0000	0000
		1"	1/32"	-75 to 300	Ground Wire	Black	1 , 5 , 10 , 25 , 50	6971T15	00000	00000
		1 1/4"	1/32"	-75 to 300	Ground Wire	Black	1 , 5 , 10 , 25 , 50	6971T16	00000	00000
		1 1/2"	1/32"	-75 to 300	Ground Wire	Black	1 , 5 , 10 , 25 , 50	6971T17	00000	00000

Adhesive-Strip Closure

Sleeving with an adhesive strip closure is permanently sealed when the adhesive is applied.

Polyurethane Rubber—Polyurethane rubber sleeving provides excellent resistance to solvents, oil, and grease.

Foil Shield—Sleeving with foil shielding is for use in stationary applications. Repeated flexing will damage the foil.

Conductive-Cloth Shield— Sleeving with conductive cloth shielding can withstand continuous motion without tearing or fraying. It’s often used to protect wire, cable, and hose in robotics and other automated applications.

UL 2556 VW-1—Flame rated VW-1 sleeving meets requirements for preventing the spread of flames based on a timed test with vertically suspended material.

										Per Ft.
	ID	Wall Thk.	Temp. Range, ° F	Certification	Flammability Rating	Features	Color	Choose a Length, ft.		1-24	25-Up
Polyurethane Rubber with Foil Shield



		3/8"	1/64"	-65 to 250	UL Recognized Component	UL 2556 VW-1	Ground Wire	Black	1 , 2 , 5 , 10 , 25	7940K31	000000	000000


		1/2"	1/64"	-65 to 250	UL Recognized Component	UL 2556 VW-1	Ground Wire	Black	1 , 2 , 5 , 10 , 25	7940K32	00000	00000
		1"	1/64"	-65 to 250	UL Recognized Component	UL 2556 VW-1	Ground Wire	Black	1 , 2 , 5 , 10 , 25	7940K33	00000	00000
		1 1/2"	1/64"	-65 to 250	UL Recognized Component	UL 2556 VW-1	Ground Wire	Black	1 , 2 , 5 , 10 , 25	7940K34	00000	00000
		2"	1/64"	-65 to 250	UL Recognized Component	UL 2556 VW-1	Ground Wire	Black	1 , 2 , 5 , 10 , 25	7940K35	00000	00000


		Polyurethane Rubber with Conductive-Cloth Shield



				3/8"	1/64"	-45 to 250	—	—	Ground Wire	Black	1 , 2 , 5 , 10 , 25	7940K41	00000	00000


				1/2"	1/64"	-45 to 250	—	—	Ground Wire	Black	1 , 2 , 5 , 10 , 25	7940K42	00000	00000
				1"	1/64"	-45 to 250	—	—	Ground Wire	Black	1 , 2 , 5 , 10 , 25	7940K43	00000	00000
				1 1/2"	1/64"	-45 to 250	—	—	Ground Wire	Black	1 , 2 , 5 , 10 , 25	7940K44	00000	00000
				2"	1/64"	-45 to 250	—	—	Ground Wire	Black	1 , 2 , 5 , 10 , 25	7940K45	00000	00000

Interference-Shielding Expandable Wire Sleeving

Protect wire and cable from signal distortion caused by nearby equipment and devices. Expandable, this sleeving stretches to fit over items for easy installation, then tightens around its contents for a secure fit. The braided construction permits heat and moisture to dissipate. This sleeving is also used to insulate and organize wire and cable. Cut to size with sheet metal snips.

Aluminum

Aluminum sleeving is about one-third the weight and reflects more heat away from its contents than copper sleeving. However, it doesn’t resist as much signal interference.

			Temp.
ID	Expanded ID	Wall Thk.	Max.	Min.		10 ft. Long	25 ft. Long	50 ft. Long	100 ft. Long
1/4"	5/16"	1/32"	Not Rated	Not Rated	5537K428	000000	000000	0000000	0000000
1/2"	9/16"	1/32"	Not Rated	Not Rated	5537K429	00000	000000	000000	000000
25/32"	7/8"	1/32"	Not Rated	Not Rated	5537K431	000000	000000	000000	000000
1"	1 1/8"	1/16"	Not Rated	Not Rated	5537K432	000000	000000	000000	00000000

Aramid Fabric with Tin-Plated Copper Shield

Aramid fabric sleeving combines the benefits of copper and aluminum sleeving. It’s shielded with copper foil to resist high amounts of signal interference, while the aramid fabric weighs half as much and reflects more heat than copper alone.

Expanded ID	Wall Thk.	Temp. Range, ° F	Shield Type		10 ft. Long	25 ft. Long	50 ft. Long	100 ft. Long



1/8"	3/16"	1/32"	-40 to 300	Foil	5537K533	0000000	0000000	0000000	0000000


3/8"	9/16"	1/32"	-40 to 300	Foil	5537K534	000000	000000	000000	000000
1/2"	3/4"	1/32"	-40 to 300	Foil	5537K535	000000	000000	000000	000000
3/4"	1 1/8"	1/32"	-40 to 300	Foil	5537K536	000000	000000	000000	00000000
1"	1 1/2"	1/32"	-40 to 300	Foil	5537K537	000000	000000	000000	00000000

Tin-Plated Copper

Copper sleeving is more conductive than aluminum sleeving, so it resists more signal interference.

			Temp.				Per Ft.
ID	Expanded ID	Wall Thk.	Max.	Min.	Choose a Length, ft.		1-99	100-Up
1/8"	5/32"	1/32"	Not Rated	Not Rated	10 , 25 , 50 , 100	5537K132	00000	00000
1/4"	5/16"	1/32"	Not Rated	Not Rated	10 , 25 , 50 , 100	5537K26	0000	0000
3/8"	7/16"	1/32"	Not Rated	Not Rated	10 , 25 , 50 , 100	5537K14	0000	0000
1/2"	9/16"	1/32"	Not Rated	Not Rated	5 , 10 , 25 , 50 , 100	5537K27	0000	0000
9/16"	23/32"	1/32"	Not Rated	Not Rated	5 , 10 , 25 , 50 , 100	5537K133	0000	0000
25/32"	7/8"	1/32"	Not Rated	Not Rated	5 , 10 , 25 , 50 , 100	5537K28	0000	0000
7/8"	1 1/8"	1/32"	Not Rated	Not Rated	5 , 10 , 25 , 50 , 100	5537K134	00000	0000
1"	1 1/8"	1/16"	Not Rated	Not Rated	5 , 10 , 25 , 50 , 100	5537K32	00000	00000
1 1/8"	1 1/4"	1/16"	Not Rated	Not Rated	5 , 10 , 25 , 50 , 100	5537K33	00000	00000
1 1/4"	1 3/8"	1/16"	Not Rated	Not Rated	5 , 10 , 25 , 50 , 100	5537K34	00000	00000
1 1/2"	1 5/8"	1/16"	Not Rated	Not Rated	5 , 10 , 25 , 50 , 100	5537K36	00000	00000
2"	2 19/32"	1/16"	Not Rated	Not Rated	5 , 10 , 25 , 50 , 100	5537K135	00000	00000

Interference-Shielding Tape Wire Sleeving

With a copper and nickel exterior and conductive lining, this sleeving shields your wire and cable from signal interference. Use it near equipment that creates signal distortion, such as transformers, generators, and motors. It’s made of polyester taffeta cloth, so it’s light and flexible. Plus, its coating resists corrosion.

You can wrap this sleeving like tape around wire and cable while they’re installed, so it’s great for emergency patches. When wrapping, make sure it overlaps itself by half its width. This ensures 98% shielding coverage to keep your components protected.

Nickel-Plated Polyester Fabric with Copper Coating with Adhesive Liner

					10 ft. Long		25 ft. Long		50 ft. Long
Wd.	Thk.	Temp. Range, ° F	Shield Type	Color		Each		Each		Each



	1"	0.006"	-40 to 250	Conductive Cloth	Gray	6092N11	0000000	6092N12	0000000	6092N13	0000000


	2"	0.006"	-40 to 250	Conductive Cloth	Gray	6092N21	000000	6092N22	000000	6092N23	000000

Wraparound Wire Sleeving for Cable and Hose Carriers

Often used in robotics and other automated applications, this sleeving adds an extra layer of protection and insulation to cable and hose carriers. It’s highly flexible and withstands continuous motion without tearing or fraying. It opens along its entire length, so there’s no need to disconnect lines or use tools for maintenance such as adding or removing cable.

Kevlar Fabric

Kevlar fabric sleeving resists temperatures up to 1000° F. Use it to protect wire near furnaces, in welding areas, and in other extremely hot environments. This sleeving has good abrasion resistance, a zipper closure for easy maintenance, and hook-and-loop on each end to hold sleeving in place.

			3 ft. Long		6 1/2 ft. Long
For Carrier OD	Max. Temp., ° F	Color		Each		Each
1.69"/43 mm	1,000	White	5830N117	0000000	5830N118	0000000
2.13"/54 mm	1,000	White	5830N119	000000	5830N12	000000
2.56"/65 mm	1,000	White	5830N121	000000	5830N122	000000
2.76"/70.2 mm	1,000	White	5830N123	000000	5830N124	000000
3.19"/81 mm	1,000	White	5830N125	000000	5830N126	000000
3.72"/94.5 mm	1,000	White	5830N127	000000	5830N128	000000
4.5"/108 mm	1,000	White	5830N129	000000	5830N13	000000
5.31"/135 mm	1,000	White	5830N131	000000	5830N132	000000

Leather

Leather sleeving has excellent abrasion resistance, making it a good choice for applications where sleeving will make contact with other objects. For easy maintenance, a zipper closure lets you access the sleeving at all points. Hook-and-loop closures at either end of the sleeving secure it in place.

			3 ft. Long		6 1/2 ft. Long
For Carrier OD	Temp. Range, ° F	Color		Each		Each



	1.69"/43 mm	-40 to 212	Black	5830N133	0000000	5830N134	0000000


	2.13"/54 mm	-40 to 212	Black	5830N135	000000	5830N136	000000
	2.56"/65 mm	-40 to 212	Black	5830N137	000000	5830N138	000000
	2.76"/70.2 mm	-40 to 212	Black	5830N139	000000	5830N14	000000
	3.19"/81 mm	-40 to 212	Black	5830N141	000000	5830N142	000000
	3.72"/94.5 mm	-40 to 212	Black	5830N143	000000	5830N144	000000
	4.5"/108 mm	-40 to 212	Black	5830N145	000000	5830N146	000000
	5.31"/135 mm	-40 to 212	Black	5830N147	000000	5830N148	000000

Polyester-Coated PVC Fabric

Image of Product. Front orientation. ZoomedIn view. Wire Sleeving. Wraparound Wire Sleeving for Cable and Hose Carriers, Polyester-Coated PVC Fabric.

PVC fabric sleeving has a chemical-resistant polyester coating, so it’s commonly used to protect wire in areas where painting or sealing takes place. A hook-and-loop closure allows access for maintenance at any point. Elastic on both ends holds sleeving in place.

			3 ft. Long		6 1/2 ft. Long
For Carrier OD	Temp. Range, ° F	Color		Each		Each



	1.69"/43 mm	-20 to 100	White	5830N101	000000	5830N102	0000000


	2.13"/54 mm	-20 to 100	White	5830N103	00000	5830N104	000000
	2.56"/65 mm	-20 to 100	White	5830N105	000000	5830N106	000000
	2.76"/70.2 mm	-20 to 100	White	5830N107	00000	5830N108	000000
	3.19"/81 mm	-20 to 100	White	5830N109	000000	5830N11	000000
	3.72"/94.5 mm	-20 to 100	White	5830N111	000000	5830N112	000000
	4.5"/108 mm	-20 to 100	White	5830N113	000000	5830N114	000000
	5.31"/135 mm	-20 to 100	White	5830N115	000000	5830N116	000000

Heat-Reflecting Hook-and-Loop Wraparound Wire Sleeving

Insulate your wire, cable, and hose in continuous temperatures up to 400° F and easily access them. This sleeving opens anywhere along its length with hook and loop. Unlike other types of sleeving, there’s no need to disconnect your components before installing—simply wrap this sleeving around what you want covered. Made of aluminum with a fiberglass liner, it reflects heat away from its contents.

Aluminum with Fiberglass Fabric Liner

Wall Thk.	Temp. Range, ° F		5 ft. Long	10 ft. Long	25 ft. Long	100 ft. Long



5/8"	1/32"	-20 to 400	7925N101	000000	000000	0000000	0000000


3/4"	1/32"	-20 to 400	7925N102	00000	00000	000000	000000
1"	1/32"	-20 to 400	7925N103	00000	00000	000000	000000
1 1/2"	1/32"	-20 to 400	7925N1	00000	00000	000000	000000

Heat-Reflecting Wraparound Wire Sleeving

Made of aluminum with a fiberglass fabric liner, this sleeving reflects heat away from contents and withstands temperatures up to 390° F to protect against internal and external heat sources. It resists chemicals and fluids. Wrap it around wire, cable, and hose without disconnecting them. The slit along the entire length permanently seals with an adhesive strip. It meets ASTM D350 requirements for self-extinguishing material.

Aluminum with Fiberglass Fabric Liner

				3 ft. Long
ID	Wall Thk.	Temp. Range, ° F	Specs. Met		Each



	1/4"	1/32"	-40 to 390	ASTM D350	2627K41	00000


	5/16"	1/32"	-40 to 390	ASTM D350	2627K42	0000
	3/8"	1/32"	-40 to 390	ASTM D350	2627K31	00000
	1/2"	1/32"	-40 to 390	ASTM D350	2627K32	00000
	5/8"	1/32"	-40 to 390	ASTM D350	2627K43	00000
	3/4"	1/32"	-40 to 390	ASTM D350	2627K33	00000
	1"	1/32"	-40 to 390	ASTM D350	2627K34	00000
	1 1/8"	1/32"	-40 to 390	ASTM D350	2627K44	00000
	1 1/4"	1/32"	-40 to 390	ASTM D350	2627K35	00000
	1 1/2"	1/32"	-40 to 390	ASTM D350	2627K36	00000

Heat-Reflecting Wire Sleeving

Protect wire, cable, and hose from heat radiating off hot objects, such as molten metal. Coated in aluminized PET, also known as Mylar, this sleeving reflects most heat without letting it pass through, so it can handle intermittent radiant heat up to 2000° F. The liner is a blend of aramid and Kevlar that withstands continuous temperatures up to 650° F. This sleeving is stitched together with PTFE-coated silica fiberglass threads, which are just as heat resistant as the sleeving. It doesn’t stretch, so it’s best to know the exact diameter of the items you’re protecting.

Aluminized PET with Kevlar Fabric Liner

Wall Thk.	Temp. Range, ° F		5 ft. Long	10 ft. Long	25 ft. Long	100 ft. Long



1/2"	1/16"	-20 to 650	6522N101	000000	000000	0000000	0000000


3/4"	1/16"	-20 to 650	6522N102	00000	00000	000000	000000
1"	1/16"	-20 to 650	6522N103	00000	000000	000000	000000