Mixer Nozzles for Two-Part Adhesive Cartridges
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/7467a93p1-b05-digital@halfx_637046223154031807.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a51p2-b05-digital@halfx_637046248898244236.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a25p1-b05-digital@halfx_637054447671084948.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a59p2-b05-digital@halfx_637054447344879184.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/7467a13p2-b05-digital@halfx_637046123002772994.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a51p3-b05-digital@halfx_637054449322216994.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a53p2-b05-digital@halfx_637054587707966177.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/177/1773a147-@halfx_637986655860192190.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/177/1773a141-@halfx_637605633605470635.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a84p1-b05-digital@halfx_637046276407731540.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a211p2-b05-digital@halfx_637054449971384550.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a231p2-b05-digital@halfx_637054449647188407.png?ver=imagenotfound)
To simultaneously mix and dispense two-part adhesives, attach these mixer nozzles to a dual cartridge. Mixing elements help combine the two parts of an adhesive as it flows through the nozzle. A short nozzle with many mixing elements combines adhesive while minimizing the adhesive left in the nozzle after dispensing. Choose a nozzle that matches the connection type, size, and mix ratio of your adhesive cartridge.
A taper tip has a small opening for controlled dispensing.
A step tip allows you to trim the opening to the diameter you need.
A blunt tip dispenses more adhesive at a time than other nozzles.
Use a luer lock tip with a needle (sold separately) for the most precise dispensing.
For Cartridge Size, oz. | Mix Ratio | Opening ID | Lg. | Mixing Elements | Mfr. | Material | Pkg. Qty. | Each | |
Taper Tip | |||||||||
---|---|---|---|---|---|---|---|---|---|
1.42, 1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 5.9" | 20 | __ | Polypropylene Plastic | __ | 00000000 | 00000 |
Pkg. | |||||||||
1.42, 1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 5.9" | 20 | __ | Polypropylene Plastic | 12 | 000000000 | 00000 |
Each | |||||||||
1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 3.4" | 16 | __ | Polypropylene Plastic | __ | 00000000 | 0000 |
Pkg. | |||||||||
1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 3.4" | 16 | __ | Polypropylene Plastic | 12 | 000000000 | 00000 |
Each | |||||||||
1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 3.9" | 12 | __ | Polypropylene Plastic | __ | 00000000 | 0000 |
Pkg. | |||||||||
1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 3.9" | 12 | __ | Polypropylene Plastic | 12 | 000000000 | 00000 |
1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 4.1" | 20 | __ | Polypropylene Plastic | 10 | 000000000 | 00000 |
Each | |||||||||
3-Step Tip | |||||||||
1.69 | 1:1, 2:1 | 0.21" | 3.3" | 16 | Loctite® | Polypropylene Plastic | __ | 000000000 | 0000 |
Pkg. | |||||||||
1.69 | 1:1, 2:1 | 0.21" | 3.3" | 16 | Loctite® | Polypropylene Plastic | 10 | 000000000 | 00000 |
Each | |||||||||
4-Step Tip | |||||||||
1.69 | 1:1, 2:1, 4:1 | 0.059"-0.188" | 6" | 21 | Loctite® | Polypropylene Plastic | __ | 00000000 | 0000 |
Pkg. | |||||||||
1.69 | 1:1, 2:1, 4:1 | 0.059"-0.188" | 6" | 21 | Loctite® | Polypropylene Plastic | 10 | 0000000 | 00000 |
Each | |||||||||
1.69 | 1:1, 2:1, 4:1, 10:1 | 0.05"-0.07" | 5.3" | 21 | __ | Polypropylene Plastic | __ | 00000000 | 0000 |
5-Step Tip | |||||||||
1.69 | 1:1, 2:1 | 0.26" | 6.2" | 20 | __ | Polypropylene Plastic | __ | 00000000 | 0000 |
Pkg. | |||||||||
1.69 | 1:1, 2:1 | 0.26" | 6.2" | 20 | __ | Polypropylene Plastic | 12 | 000000000 | 00000 |
Each | |||||||||
1.69 | 1:1, 2:1, 4:1, 10:1 | 0.05"-0.07" | 5.9" | 20 | __ | Polypropylene Plastic | __ | 00000000 | 0000 |
Blunt Tip | |||||||||
1.69 | 1:1, 2:1, 4:1, 10:1 | 0.19" | 3.3" | 12 | __ | Polypropylene Plastic | __ | 00000000 | 0000 |
Pkg. | |||||||||
1.69 | 1:1, 2:1, 4:1, 10:1 | 0.19" | 3.3" | 12 | __ | Polypropylene Plastic | 12 | 000000000 | 00000 |
Each | |||||||||
1.69 | 1:1, 2:1, 4:1, 10:1 | 0.19" | 5.3" | 20 | __ | Polypropylene Plastic | __ | 00000000 | 0000 |
Luer Lock Tip | |||||||||
1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 4.1" | 20 | __ | Polypropylene Plastic | __ | 00000000 | 0000 |
Pkg. | |||||||||
1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 4.1" | 20 | __ | Polypropylene Plastic | 10 | 000000000 | 00000 |
Each | |||||||||
1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 5.9" | 20 | __ | Polypropylene Plastic | __ | 00000000 | 0000 |
Pkg. | |||||||||
1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 5.9" | 20 | __ | Polypropylene Plastic | 10 | 000000000 | 00000 |
Each | |||||||||
Luer Slip Tip | |||||||||
1.69 | 1:1, 2:1 | 0.062" | 3.3" | 16 | Loctite® | Polypropylene Plastic | __ | 0000000 | 0000 |
Pkg. | |||||||||
1.69 | 1:1, 2:1 | 0.062" | 3.3" | 16 | Loctite® | Polypropylene Plastic | 10 | 0000000 | 00000 |
Each | |||||||||
1.69 | 1:1, 2:1, 4:1 | 0.063" | 6" | 20 | Loctite® | Polypropylene Plastic | __ | 0000000 | 0000 |
Pkg. | |||||||||
1.69 | 1:1, 2:1, 4:1 | 0.063" | 6" | 20 | Loctite® | Polypropylene Plastic | 10 | 00000000 | 00000 |
Each | |||||||||
Combination Tip | |||||||||
1.69 | 1:1, 2:1, 4:1 | 0.066" | 4.5" | 24 | Loctite® | Polypropylene Plastic | __ | 0000000 | 0000 |
Pkg. | |||||||||
1.69 | 1:1, 2:1, 4:1 | 0.066" | 4.5" | 24 | Loctite® | Polypropylene Plastic | 10 | 00000000 | 00000 |
For Cartridge Size, oz. | Mix Ratio | Opening ID | Lg. | Mixing Elements | Mfr. | Material | Each | Pkg. Qty. | Pkg. | ||
3-Step Tip | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
6.76, 13.5 | 1:1, 2:1 | 0.11"-0.13" | 6.3" | 24 | __ | Polypropylene Plastic | 00000000 | 00000 | __ | 000000 | 00 |
6.76, 13.5 | 1:1, 2:1 | 0.12"-0.37" | 7.3" | 18 | __ | Polypropylene Plastic | 0000000 | 0000 | __ | 000000 | 00 |
6.76, 13.5 | 1:1, 2:1 | 0.12"-0.37" | 9.2" | 24 | __ | Polypropylene Plastic | 0000000 | 0000 | __ | 000000 | 00 |
5-Step Tip | |||||||||||
1.69 | 1:1, 2:1 | 0.26" | 6.2" | 20 | __ | Polypropylene Plastic | 00000000 | 0000 | 12 | 000000000 | 000000 |
6.76, 13.5 | 1:1, 2:1 | 0.07"-0.21" | 7.3" | 20 | 3M | Polypropylene Plastic | 0000000 | 0000 | __ | 000000 | 00 |
6.76, 13.5 | 1:1, 2:1 | 0.118"-0.35" | 8.4" | 18 | __ | Polypropylene Plastic | 0000000 | 0000 | __ | 000000 | 00 |
6.76, 13.5 | 1:1, 2:1 | 0.157"-0.45" | 11.5" | 24 | __ | Polypropylene Plastic | 0000000 | 0000 | __ | 000000 | 00 |
6.76, 13.5 | 1:1, 2:1 | 0.66" | 5" | 20 | 3M | Polypropylene Plastic | 00000000 | 0000 | __ | 000000 | 00 |
Combination Tip | |||||||||||
6.76, 13.52 | 1:1, 2:1, 4:1 | 0.066" | 5" | 24 | Loctite® | Polypropylene Plastic | 0000000 | 0000 | 10 | 0000000 | 00000 |
For Cartridge Size, oz. | Mix Ratio | Opening ID | Lg. | Mixing Elements | Mfr. | Material | Each | Pkg. Qty. | Pkg. | ||
Taper Tip | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
6.76, 13.52 | 1:1, 2:1 | 0.07" | 5.2" | 24 | Loctite® | Polypropylene Plastic | 0000000 | 00000 | 10 | 0000000 | 000000 |
4-Step Tip | |||||||||||
6.76, 13.52 | 1:1, 2:1 | 0.07" | 7.6" | 24 | Loctite® | Polypropylene Plastic | 000000000 | 0000 | 10 | 000000000 | 00000 |
7.8 | 10:1 | 0.394" | 8.7" | 18 | SciGrip | Polypropylene Plastic | 000000000 | 0000 | __ | 000000 | 00 |
5-Step Tip | |||||||||||
1.69 | 1:1, 2:1 | 0.26" | 6.2" | 20 | __ | Polypropylene Plastic | 00000000 | 0000 | 12 | 000000000 | 00000 |
16.57 | 10:1 | 0.094"-0.235" | 9.1" | 24 | Loctite® | Polyethylene Plastic | 0000000 | 0000 | 10 | 0000000 | 00000 |
For Cartridge Size, oz. | Mix Ratio | Opening ID | Lg. | Mixing Elements | Mfr. | Material | Pkg. Qty. | Each | |
5-Step Tip | |||||||||
---|---|---|---|---|---|---|---|---|---|
1.69 | 1:1, 2:1 | 0.26" | 6.2" | 20 | __ | Polypropylene Plastic | __ | 00000000 | 00000 |
Pkg. | |||||||||
1.69 | 1:1, 2:1 | 0.26" | 6.2" | 20 | __ | Polypropylene Plastic | 12 | 000000000 | 00000 |
Each | |||||||||
Blunt Tip | |||||||||
8.6 | 1:1, 2:1, 4:1, 10:1 | 0.44" | 10" | 20 | Loctite® | Polypropylene Plastic | __ | 000000000 | 0000 |
Pkg. | |||||||||
8.6 | 1:1, 2:1, 4:1, 10:1 | 0.44" | 10" | 20 | Loctite® | Polypropylene Plastic | 3 | 000000000 | 0000 |
Each | |||||||||
20.7 | 1:1, 2:1, 4:1, 10:1 | 0.56" | 8.5" | 19 | Loctite® | Polypropylene Plastic | __ | 000000000 | 0000 |
Pkg. | |||||||||
20.7 | 1:1, 2:1, 4:1, 10:1 | 0.56" | 8.5" | 19 | Loctite® | Polypropylene Plastic | 3 | 000000000 | 00000 |
For Cartridge Size, oz. | Mix Ratio | Opening ID | Lg. | Mixing Elements | Mfr. | Material | Each | Pkg. Qty. | Pkg. | ||
Taper Tip | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
0.34 | 1:1 | 0.039" | 2.9" | 16 | __ | Polypropylene Plastic | 0000000 | 00000 | __ | 000000 | 00 |
1.52 | 10:1 | 0.08" | 3.6" | 16 | 3M | Polypropylene Plastic | 0000000 | 0000 | __ | 000000 | 00 |
1.64, 1.69 | 1:1, 2:1, 2:3 | 0.08" | 3.6" | 16 | 3M | Polypropylene Plastic | 0000000 | 0000 | __ | 000000 | 00 |
1.69 | 1:1, 2:1 | 0.039" | 3" | 16 | Loctite® | Polypropylene Plastic | 0000000 | 0000 | 10 | 0000000 | 000000 |
1.69 | 1:1, 2:1 | 0.07" | 3.6" | 16 | Loctite® | Polypropylene Plastic | 0000000 | 0000 | 10 | 0000000 | 00000 |
1.69 | 1:1, 2:1 | 0.13" | 4.8" | 16 | Loctite® | Polypropylene Plastic | 000000000 | 0000 | 10 | 000000000 | 00000 |
1.69 | 4:1, 10:1 | 0.07" | 4.8" | 24 | Loctite® | Polypropylene Plastic | 0000000 | 0000 | 10 | 0000000 | 00000 |
1.69 | 4:1, 10:1 | 0.1" | 2.4" | 16 | Loctite® | Polypropylene Plastic | 000000000 | 0000 | 5 | 000000000 | 0000 |
3-Step Tip | |||||||||||
0.4 | 100:85 | 0.1" | 2.4" | 16 | Loctite® | Polypropylene Plastic | 000000000 | 0000 | 10 | 000000000 | 0000 |
4-Step Tip | |||||||||||
1.64, 1.69 | 1:1, 2:1 | 0.04"-0.193" | 5.8" | 20 | 3M | Polypropylene Plastic | 0000000 | 0000 | __ | 000000 | 00 |
5-Step Tip | |||||||||||
1.69 | 1:1, 2:1 | 0.26" | 6.2" | 20 | __ | Polypropylene Plastic | 00000000 | 0000 | 12 | 000000000 | 00000 |
1.69 | 1:1, 2:1 | 0.06"-0.26" | 6.2" | 20 | Loctite® | Polypropylene Plastic | 00000000 | 0000 | __ | 000000 | 00 |
1.69 | 10:1 | 0.06"-0.26" | 6.2" | 20 | Loctite® | Polypropylene Plastic | 00000000 | 0000 | __ | 000000 | 00 |
Empty Cartridges for Two-Part Adhesives
Fill these cartridges with two-part adhesive and use them with a dispensing gun and mixer nozzle (each sold separately) to simultaneously mix and dispense. Choose a size and connection type that match your nozzle and dispensing gun.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/7467a93p1-b05-digital@halfx_637046223154031807.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a35p1-b05-digital@halfx_637048229117902350.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/b05/b05-nozzleconnection-bayonet-digital@halfx_637046110641449185.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/b05/b05-nozzleconnection-bellmount-digital@halfx_637046135836011192.png?ver=imagenotfound)
Capacity, fl. oz. | Mix Ratio | Material | Includes | Each | |
Bayonet Connection | |||||
---|---|---|---|---|---|
1.69 | 1:1 | Polypropylene Plastic | Cap, Two Pistons | 000000000 | 00000 |
1.69 | 2:1 | Polypropylene Plastic | Cap, Two Pistons | 000000000 | 0000 |
Bell-Mount Connection | |||||
6.76 | 1:1 | Polypropylene Plastic | Plug, Two Pistons | 00000000 | 0000 |
13.5 | 1:1 | Polypropylene Plastic | Plug, Two Pistons | 00000000 | 0000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/7467a93p1-b05-digital@halfx_637046223154031807.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a51p2-b05-digital@halfx_637046248898244236.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a25p1-b05-digital@halfx_637054447671084948.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a59p2-b05-digital@halfx_637054447344879184.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a51p3-b05-digital@halfx_637054449322216994.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a53p2-b05-digital@halfx_637054587707966177.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a84p1-b05-digital@halfx_637046276407731540.png?ver=imagenotfound)
To simultaneously mix and dispense two-part adhesives, attach these mixer nozzles to a dual cartridge. Mixing elements help combine the two parts of an adhesive as it flows through the nozzle. A short nozzle with many mixing elements combines adhesive while minimizing the adhesive left in the nozzle after dispensing. Choose a nozzle that matches the connection type, size, and mix ratio of your adhesive cartridge.
A taper tip has a small opening for controlled dispensing.
A step tip allows you to trim the opening to the diameter you need.
A blunt tip dispenses more adhesive at a time than other nozzles.
Use a luer lock tip with a needle (sold separately) for the most precise dispensing.
Each | Package | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Cartridge Size, oz. | Mix Ratio | Opening ID | Lg. | Mixing Elements | Mfr. | Material | Each | Pkg. Qty. | Pkg. | ||
Bayonet Connection | |||||||||||
Taper Tip | |||||||||||
1.42, 1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 5.9" | 20 | __ | Polypropylene Plastic | 00000000 | 00000 | 12 | 000000000 | 000000 |
1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 3.4" | 16 | __ | Polypropylene Plastic | 00000000 | 0000 | 12 | 000000000 | 00000 |
1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 3.9" | 12 | __ | Polypropylene Plastic | 00000000 | 0000 | 12 | 000000000 | 00000 |
1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 4.1" | 20 | __ | Polypropylene Plastic | 000000 | 00 | 10 | 000000000 | 00000 |
3-Step Tip | |||||||||||
1.69 | 1:1, 2:1 | 0.21" | 3.3" | 16 | Loctite® | Polypropylene Plastic | 000000000 | 0000 | 10 | 000000000 | 00000 |
5-Step Tip | |||||||||||
1.69 | 1:1, 2:1, 4:1, 10:1 | 0.05"-0.07" | 5.9" | 20 | __ | Polypropylene Plastic | 00000000 | 0000 | __ | 000000 | 00 |
Blunt Tip | |||||||||||
1.69 | 1:1, 2:1, 4:1, 10:1 | 0.19" | 3.3" | 12 | __ | Polypropylene Plastic | 00000000 | 0000 | 12 | 000000000 | 00000 |
1.69 | 1:1, 2:1, 4:1, 10:1 | 0.19" | 5.3" | 20 | __ | Polypropylene Plastic | 00000000 | 0000 | __ | 000000 | 00 |
Luer Lock Tip | |||||||||||
1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 4.1" | 20 | __ | Polypropylene Plastic | 00000000 | 0000 | 10 | 000000000 | 00000 |
1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 5.9" | 20 | __ | Polypropylene Plastic | 00000000 | 0000 | 10 | 000000000 | 00000 |
Bell-Mount Connection | |||||||||||
3-Step Tip | |||||||||||
6.76, 13.5 | 1:1, 2:1 | 0.11"-0.13" | 6.3" | 24 | __ | Polypropylene Plastic | 00000000 | 0000 | __ | 000000 | 00 |
6.76, 13.5 | 1:1, 2:1 | 0.12"-0.37" | 7.3" | 18 | __ | Polypropylene Plastic | 0000000 | 0000 | __ | 000000 | 00 |
6.76, 13.5 | 1:1, 2:1 | 0.12"-0.37" | 9.2" | 24 | __ | Polypropylene Plastic | 0000000 | 0000 | __ | 000000 | 00 |
5-Step Tip | |||||||||||
6.76, 13.5 | 1:1, 2:1 | 0.66" | 5" | 20 | 3M | Polypropylene Plastic | 00000000 | 0000 | __ | 000000 | 00 |
6.76, 13.5 | 1:1, 2:1 | 0.07"-0.21" | 7.3" | 20 | 3M | Polypropylene Plastic | 0000000 | 0000 | __ | 000000 | 00 |
6.76, 13.5 | 1:1, 2:1 | 0.118"-0.35" | 8.4" | 18 | __ | Polypropylene Plastic | 0000000 | 0000 | __ | 000000 | 00 |
6.76, 13.5 | 1:1, 2:1 | 0.157"-0.45" | 11.5" | 24 | __ | Polypropylene Plastic | 0000000 | 0000 | __ | 000000 | 00 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a71-@halfx_637060404979426124.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/745/7451a51p1-b05-digital@halfx_637046221978152892.png?ver=imagenotfound)
Use these guns to dispense two-part adhesives. Do not use them with 3M dual cartridges.
Empty Syringes for Two-Part Adhesives
Empty Cartridges for One-Part Adhesive Dispensing Guns
![](/prerenderstable/mvPRE/contents/gfx/imagecache/757/7579a42p1-b05-digital@halfx_637046012031460955.png?ver=imagenotfound)
Fill these cartridges with one-part adhesive and use them with a dispensing gun and cartridge holder. For precise dispensing, add a nozzle or a luer lock adapter and luer lock hub needle.
The 12.8-fl. oz. cartridge can also be used with a standard caulk gun.
Tip | |||||||
---|---|---|---|---|---|---|---|
Capacity, fl. oz. | Pipe Size | Thread Type | Gender | Material | Includes | Each | |
2.5 | 1/4 | NPT | Female | Polyethylene Plastic | Cap, Piston | 0000000 | 00000 |
6 | 1/4 | NPT | Female | Polyethylene Plastic | Cap, Piston | 0000000 | 0000 |
12 | 1/4 | NPT | Female | Polyethylene Plastic | Cap, Piston | 0000000 | 00000 |
12.8 | 1/4 | NPT | Female | Polyethylene Plastic | Cap, Piston | 0000000 | 00000 |
Luer Lock Adapters (Pkg. of 10) | 0000000 | Pkg. | 000000 |
Nozzles for One-Part Adhesive Cartridges
Attach these nozzles to a cartridge for controlled dispensing of one-part adhesives.
Round nozzles dispense a uniform bead.
Ribbon nozzles have a flat opening to spread adhesive as they dispense.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/757/7579a34p1-@halfx_637170251195434089.png?ver=imagenotfound)
For Cartridge Size, oz. | Opening ID | Lg. | Pipe Size | Thread Type | Gender | Material | Each | |
2.5, 6, 12 | 1/32" | 4" | 1/4 | NPT | Male | Polyethylene Plastic | 0000000 | 00000 |
2.5, 6, 12 | 1/16" | 2 1/2" | 1/4 | NPT | Male | Polyethylene Plastic | 0000000 | 0000 |
2.5, 6, 12 | 1/16" | 4" | 1/4 | NPT | Male | Polyethylene Plastic | 0000000 | 0000 |
2.5, 6, 12 | 1/16" | 6" | 1/4 | NPT | Male | Polyethylene Plastic | 0000000 | 0000 |
2.5, 6, 12 | 1/8" | 2 1/2" | 1/4 | NPT | Male | Polyethylene Plastic | 0000000 | 0000 |
2.5, 6, 12 | 1/8" | 4" | 1/4 | NPT | Male | Polyethylene Plastic | 0000000 | 0000 |
2.5, 6, 12 | 1/8" | 6" | 1/4 | NPT | Male | Polyethylene Plastic | 0000000 | 0000 |
2.5, 6, 12 | 1/8" | 8" | 1/4 | NPT | Male | Polyethylene Plastic | 00000000 | 0000 |
2.5, 6, 12 | 1/8" | 10" | 1/4 | NPT | Male | Polyethylene Plastic | 00000000 | 0000 |
Extensions for Round Nozzles (6 3/8" Lg.) | 0000000 | Each | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/757/7579a75p1-b05-@halfx_637170249861814014.png?ver=imagenotfound)
Opening | |||||||||
---|---|---|---|---|---|---|---|---|---|
For Cartridge Size, oz. | Wd. | Ht. | Lg. | Pipe Size | Thread Type | Gender | Material | Each | |
2.5, 6, 12 | 3/8" | 3/64" | 4 1/2" | 1/4 | NPT | Male | Polyethylene Plastic | 0000000 | 000000 |
2.5, 6, 12 | 1/2" | 1/16" | 4" | 1/4 | NPT | Male | Polyethylene Plastic | 0000000 | 00000 |
2.5, 6, 12 | 3/4" | 1/8" | 4 1/4" | 1/4 | NPT | Male | Polyethylene Plastic | 00000000 | 00000 |
2.5, 6, 12 | 1" | 1/8" | 4 1/4" | 1/4 | NPT | Male | Polyethylene Plastic | 0000000 | 00000 |
2.5, 6, 12 | 1 3/4" | 1/8" | 4" | 1/4 | NPT | Male | Polyethylene Plastic | 0000000 | 00000 |
Extensions for Ribbon Nozzles (6 3/8" Lg.) | 0000000 | Each | 000000 |