Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components. Enclosures are made of nonconductive polycarbonate that resists denting, chipping, and cracking.

Aluminum enclosures are a lightweight yet durable alternative to stainless steel.

Fiberglass enclosures resist denting better than metal and are more UV resistant than polycarbonate enclosures. They are nonconductive.

With a hygienic design, these enclosures minimize spots where food, debris, and water could collect after washdowns. Use them to house and mount switches, buttons, and other components in sanitary environments.

Made of polycarbonate, these enclosures resist denting, chipping, and cracking.

Mounting feet make attachment to machines and walls hassle-free. These enclosures are small and lightweight for use with sensors, switches, testing devices, and circuit boards.

Control access to these enclosures with a key-operated lock.

Mounting feet make attachment to machines and walls hassle-free.

Made of polycarbonate, these enclosures resist denting, chipping, and cracking better than stainless steel enclosures.

Holes in the cover allow easy installation of push buttons, switches, and indicating lights.

Protect electronics from washdowns in food plants and other sanitary environments. These enclosures mount directly into walls to protect wiring and reduce the surface area that needs to be cleaned. Standard-size push-button holes are already installed, saving you the effort of measuring and cutting holes yourself.

Made of fiberglass, these enclosures are lightweight and won’t rust, but still shield push-button controls from water, dirt, and oil.

Small and lightweight, these enclosures are used with sensors, switches, and testing devices.

These enclosures allow you to inspect your electronics without opening the cover.

These enclosures have internal slots to hold circuit boards in place.

With internal slots and external fins, these enclosures hold circuit boards securely and dissipate heat to keep electronics from overheating.

Made of nonconductive polycarbonate, these enclosures withstand prolonged submersion in water while protecting electronics from dents, chips, and cracks.

Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components.

Fasten these enclosures to machine control panels or walls without exposing the contents to wet and oily environments.

Made of nonconductive polycarbonate, these enclosures withstand prolonged submersion in water while protecting electronics from dents, chips, and cracks. A clear cover lets you monitor the inside without opening them.

Check on the contents inside these enclosures from every angle without opening them in wet environments.

Holes in the cover allow easy installation of push buttons, switches, and indicating lights.

Control access to these enclosures with a key-operated lock.

No need to cut your own holes—these enclosures already have them to make installing push-buttons, switches, and indicating lights quick and easy.

These enclosures are rated NEMA 13 for indoor protection from dirt and oil/coolant spraying.

Holes in the cover of these enclosures allow easy installation of push buttons, switches, and indicating lights.

Make your push buttons, switches, and indicating lights more visible and ergonomic to use. Enclosures mount on either of two sides, creating a 30° or 60° slanted surface.

Made of aluminum, these enclosures resist corrosion from rain, sleet, and snow. While not as corrosion resistant as stainless steel, aluminum is lighter for better mobility, and also easier to machine for custom mounting.

Mounted horizontally, such as on machinery or rooftops, these enclosures protect wiring and other electrical components from rain, snow, and ice thanks to their overhanging top.

For use in hazardous locations, these enclosures are rated NEMA 7 and 9 and meet UL Class I, Divisions 1 and 2, Groups B, C, and D; Class II, Divisions 1 and 2, Groups E, F, and G; and Class III, Divisions 1 and 2.

Suitable for installing in the ground or for use in wet environments, these direct burial enclosures are rated NEMA 6P for protection from dirt, washdowns, corrosion, and water submersion.

These enclosures reduce electromagnetic interference (EMI) and radio frequency interference (RFI), which can cause electrical problems like flickering monitors, interrupted data signals, and unwanted radio noise.

House emergency stop buttons, life safety equipment, and other devices that need to be seen with these brightly colored enclosures, which are easy to spot even in high-dust areas.

Keep enclosures locked until the power is cut. A multipoint latch connects to a flange-mount disconnect switch (not included) to hold the door closed, preventing potential electrical shock.

Protect tablet computers, touch displays, and readouts in these specially sized enclosures. They are rated IP65 for protection from spraying water.

A 9-volt battery fits inside a compartment in these enclosures to power testing devices and other hand-held instruments.

Rated NEMA 12 for protection from dirt and oil/coolant dripping.

Protect monitors and televisions from environmental damage with these enclosures.

These enclosures shield electrical components from water, so they’re safe to install onto DIN rail in wet and washdown environments.

For use in enclosures and panels where components require battery power, these enclosures have contacts for AA and 9-volt batteries.

Easily access HMI devices, push-buttons, and other electronics mounted on the exterior of an enclosure while keeping contents safe from water, oil, dust, and weather.

House and organize up to 800 lbs. of components such as servers, automation controls, and computers. All are compatible with standard 19" wide components.

Safely and clearly view electronics inside enclosures in areas with explosive gases and dust. Made of glass, these windows protect your electronics from dust, weather, and washdowns.

Protect wire and cable from dust, dirt, and oil/coolant dripping—this raceway is rated NEMA 12.

Get projects off to a quick start with these kits that include the components you need to build simple structures, such as workbenches and stands.

Stay organized with hooks, bin boxes, shelves, and tool holders that work with T-slotted framing.

Add mounting feet and casters to T-slotted framing structures to level equipment, anchor legs to the floor, or add mobility.

Use hinges to add doors, lids, and machine guards to T-slotted framing.

Slide drawers, panels, and doors with these tracks and rollers.

Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.

Attach sensors, tubes, and other components to T-slotted framing rails and structures.

Bumpers and surface guards cushion doors and other moving parts to prevent damage and reduce noise.

Pivots provide smooth motion at the junction between two T-slotted rails.

Add electrical outlets to workstations with these outlet strips that mount on T-slotted rails.

Route wires, cables, and tubing along T‐slotted rails.

Control static and ground T-slotted framing structures with these bonding and grounding components.

Distribute compressed air, hydraulic fluid, or water from a single supply to multiple locations.

Stronger than plastic and aluminum, this is the lightest weight framing we offer. It has good resistance to chemicals and salt water.

Made of 316 stainless steel, this framing has excellent resistance to chemicals and salt water.

To provide corrosion resistance in wet environments, this framing is galvanized.

No need for fasteners—friction holds this framing together. Use press-fit framing and fittings to assemble carts, enclosures, and partitions.

Thick construction makes this framing strong and sturdy.

Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this steel bolt-together framing to build guards, tables, and racks.

Create strong structures by welding this framing together. Add metal panels to close off openings.

Flush connections between rails and fittings give structures a clean finished look. Use this framing for stair rails, work platforms, and workstations.

Inspect the terminal block and wiring without opening the cover.

Framed in aluminum T-slotted extrusions, these customizable machine guards provide multiple points of attachment for other components and structures.

These panels lift on and off their posts in seconds, so you can protect machinery while providing access for maintenance.

Protect personnel and equipment from debris with these portable panels.

Safely handle hazardous and sensitive material in an enclosed space that keeps out air and moisture.

With thicker steel and a thicker window than other stand-up-height computer workstations, these workstations protect a computer from tough plant environments.

Due to the welded-wire construction these panels require fewer nuts and bolts, and won’t unravel if you need to cut around a pipe or other obstruction.

Create secure but visible tool and stock rooms.

These phones are rated NEMA 3R for protection against falling liquids and light splashing.

Protect your telephones from water, dust, corrosion, and extreme weather with these enclosures. They're rated NEMA 4X for washdown and corrosion protection.

Protect batteries from dirt, debris, and water.

Filtering away dust and particles, these hoods create a clean space for demanding work, such as bioprocessing, pharmaceuticals, electronics, and optics.

Pound fence posts into the ground.

With wire strands welded at each intersection, this fencing has a strong, rigid construction.

Made of finely knit corrosion-resistant mesh, this highly pliable fencing is often used to secure insulation blankets, covers, and jackets.

If none of our standard guards fit your chain or belt system, we'll create one to suit your needs. Guards are steel and fit sprockets up to 48" apart.