Rotary Motion Position-Measuring Transmitter Kits
In addition to a transmitter, these kits include a 6 1/2-ft. cable and a mounting bracket. Also known as encoders, transmitters convert motion to an electrical signal to indicate distance, direction, and speed in process control and metering applications. These kits are commonly used to monitor the position or velocity of rotating equipment. You can also mount a wheel (not included) to measure distance in linear applications. Transmitters must be used with a controller that has quadrature detection to get a 4X resolution increase. Output channel Z is also known as an index channel.
Use a flexible shaft coupling (not included) to connect the transmitter shaft to a drive shaft.
| For Counter Function | Output Channels | Resolution Increase | For Max. Shaft Speed, rpm | Input Voltage  | Output Current, mA | Resistor Included | Body Material | Shaft Material | Fasteners Included | Fasteners Required | For Mounting Screw Size | Choose a Resolution | Each | |
Quadrature with Index Output Channel | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Up and Down | A, B, Z | 2X, 4X | 6,000 | 5V DC-28V DC | 20 | No | Plastic | Stainless Steel | No | Yes | 1/4" | 00000000 | 0000000 | |
| 6" Circumference Polyurethane Wheel (1.91" Dia. × 1/4" Wd.) | 00000000 | Each | 000000 |
Rotary Motion Position-Measuring Transmitters
Provide motion feedback to counters, controllers, and motor drives for automated motion control and measurement applications. Also known as encoders, transmitters convert rotary motion to an electrical signal so you can operate your system based on distance, direction, and speed of travel. These transmitters have pull-up resistor output. Since they have two shafts, you can mount them on either side to fit your setup.
Use a flexible shaft coupling (not included) to connect the transmitter shaft to a drive shaft.
Mount a wheel (not included) to use transmitters to measure lengths.
Use cables (not included) to connect transmitters to counters and controllers.
Mount. Plate | Mount. Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Counter Function | Output Channels | Resolution Increase | For Max. Shaft Speed, rpm | Input Voltage | Output Current, mA | Shaft Coupling Required | Body Material | Shaft Material | Lg. | Wd. | Ctr.-to-Ctr. | Thread Size | Choose a Resolution | Each | |
Single Output Channel | |||||||||||||||
| Up | A | 2X | 6,000 | 5V DC-28V DC | 250 | Yes | Aluminum | Stainless Steel | 2 1/4" | 2 1/4" | 1.41" | 6-32 | 00000000 | 0000000 | |
Linear Scales
Increase the accuracy of your manual machine when you fit it with a linear scale. These scales have an LCD that displays exact positioning on one axis. They have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the scale is off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
053906B model comes with mounting brackets for installation on Bridgeport-type milling machines. It requires a 10-pin data cable and Mitutoyo 10-Pin to USB adapter to connect to your PC.
USB data cable (sold separately) connects the scale directly to your PC.
10-pin data cables (sold separately) connect the scale to a Mitutoyo miniprocessor or multiplexer.
Mitutoyo 10-Pin to USB Adapter (sold separately) adapts Mitutoyo 10-pin SPC cables for connection to a USB port on your PC.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from a scale to your PC without being tethered by a cable.
Measuring Range | Measuring Increments | Accuracy | Overall | Mount. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric, mm | Inch | Metric, mm | Inch | Metric, mm | Lg. | Wd. | Material | Batteries Included | Measuring Tool Connection Type | No. of Holes | Hardware Included | Manufacturer Model No. | Each | |
Vertical Orientation | |||||||||||||||
| 0"-5" | 0-125 | 0.0005" | 0.01 | ±0.001" | ±0.03 | 6" | 1.4" | Stainless Steel | Yes | Straight Mitutoyo Connector | 2 | Yes | 053906B | 00000000 | 0000000 |
| Measuring Tool Connection Type | Lg. | Each | ||
| USB Cable | Straight Mitutoyo Connector | 80" | 000000 | 0000000 |
| 10-Pin Cable | Straight Mitutoyo Connector | 40" | 00000000 | 00000 |
| 10-Pin Cable | Straight Mitutoyo Connector | 80" | 00000000 | 00000 |
| Wireless Transmitter | Straight Mitutoyo Connector | 1 3/4" | 000000 | 000000 |
| Wireless Receiver | __ | 5 1/2" | 000000 | 000000 |
| Replacement Button Cell Battery | __ | __ | 00000000 | 0000 |
| Mitutoyo 10-Pin to USB Adapters | __ | 2 1/2" | 0000000 | 000000 |