Selecting Compatible Lead Screws and Nuts
More
About Air Preparation
More
End Block Sets for Wilkerson Modular Compressed
Air Filter/Regulator/Lubricators (FRLs)
Swap out Wilkerson modular filter/regulator/lubricator components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them. Check the manufacturer series on your Wilkerson components to ensure compatibility.
| For Pipe Size  | For Manufacturer Series | Lg. | Ht. | Dp. | Each | |
For NPT Threads | ||||||
|---|---|---|---|---|---|---|
| 1/8 | F08, L08, R08 | 1 9/16" | 1 7/16" | 1" | 00000000 | 000000 |
| 1/4 | C16, C26, CB7, F16, F26, L16, L26, M16, M26, R16, R26 | 1 3/16" | 1 1/4" | 3/4" | 0000000 | 00000 |
| 1/4 | B08, C08, D08, F08, L08, M08, R08, R09, V40 | 1 9/16" | 1 7/16" | 1" | 00000000 | 00000 |
| 1/4 | B18, C18, D18, F18, L18, M18, R18, R19 | 2 3/16" | 1 3/4" | 1 9/16" | 0000000 | 00000 |
| 3/8 | C16, C26, CB7, F16, F26, L16, L26, M16, M26, R16, R26 | 1 3/16" | 1 1/4" | 3/4" | 0000000 | 00000 |
| 3/8 | B18, B28, C18, C28, D18, D28, F18, F28, L18, L28, M18, M28, R18, R19, R28, V60 | 2 3/16" | 1 3/4" | 1 9/16" | 00000000 | 00000 |
| 1/2 | C16, C26, CB7, F16, F26, L16, L26, M16, M26, R16, R26 | 1 3/16" | 1 1/4" | 3/4" | 0000000 | 00000 |
| 1/2 | B18, B28, C18, C28, D18, D28, F18, F28, L18, L28, M18, M28, R18, R19, R28, V60, V73 | 2 3/16" | 1 3/4" | 1 9/16" | 00000000 | 00000 |
| 3/4 | B28, C28, D28, F28, L28, M28, R28, V73 | 2 3/16" | 1 3/4" | 1 9/16" | 00000000 | 00000 |
End Block Sets for Norgren Modular Compressed
Air Filter/Regulator/Lubricators (FRLs)
Swap out Norgren modular filter/regulator/lubricator components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them. Check the manufacturer series on your Norgren components to ensure compatibility.
Mounting Hole | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Pipe Size | For Manufacturer Series | Lg. | Ht. | Dp. | Mounting Fasteners Included | Dia. | No. Of | Each | |
| 1/4 | B73G, F73C, F73G, L73M, R73G | 1 5/16" | 4" | 3 1/8" | Yes | 0.25" | 4 | 0000000 | 000000 |
| 1/4 | R72M | 1" | 2 15/16" | 2 1/4" | No | 0.188" | 4 | 0000000 | 00000 |
| 3/8 | B73G, B74G, F73C, F74C, F74G, L74M, R73G, R74G | 1 5/16" | 4" | 3 1/8" | Yes | 0.25" | 4 | 0000000 | 00000 |
| 3/8 | R72M | 1" | 2 15/16" | 2 1/4" | No | 0.188" | 4 | 0000000 | 00000 |
| 1/2 | B73G, B74G, F73C, F73G, F74C, F74G, L73M, L74M, R73G, R74G | 1 5/16" | 4" | 3 1/8" | Yes | 0.25" | 4 | 0000000 | 00000 |
| 3/4 | F74G, F74H, L74M, R74G | 1 5/16" | 4" | 3 1/8" | Yes | 0.25" | 4 | 0000000 | 00000 |
End Block Sets for Festo Modular Compressed
Air Filter/Regulator/Lubricators (FRLs)
Swap out Festo modular filter/regulator/lubricator components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them. Check the manufacturer series on your Festo components to ensure compatibility.
End Block Sets for ARO Modular Compressed
Air Filter/Regulator/Lubricators (FRLs)
Swap out ARO modular filter/regulator/lubricator components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them. Check the manufacturer series on your ARO components to ensure compatibility.
| For Pipe Size | For Manufacturer Series | Lg. | Ht. | Dp. | Each | |
| 1/8 | 1000 | 1 5/16" | 1 9/16" | 13/16" | 0000000 | 000000 |
| 1/4 | 1000 | 1 5/16" | 1 9/16" | 13/16" | 0000000 | 00000 |
| 1/4 | 1500 | 1 13/16" | 1 5/16" | 1" | 00000000 | 00000 |
| 3/8 | 1500 | 1 13/16" | 1 5/16" | 1" | 00000000 | 00000 |
| 3/8 | 2000 | 1 5/8" | 1 1/4" | 1 1/4" | 00000000 | 00000 |
| 1/2 | 2000 | 1 5/8" | 1 1/4" | 1 1/4" | 00000000 | 00000 |
| 3/4 | 3000 | 1 15/16" | 1 15/16" | 1 9/16" | 00000000 | 00000 |
| 1 | 3000 | 1 15/16" | 1 15/16" | 1 9/16" | 00000000 | 00000 |
End Block Sets for Aventics Modular Compressed
Air Filter/Regulator/Lubricators (FRLs)
Swap out Aventics modular filter/regulator/lubricator components without unthreading your air line connections. These blocks remain connected to your pipes while you replace the components between them. Check the manufacturer series on your Aventics components to ensure compatibility.
End Block Sets for Parker Modular Compressed
Air Filter/Regulator/Lubricators (FRLs)
Swap out Parker modular filter/regulator/lubricator components without unthreading your air line connections. These blocks remain connected to your pipes while you replace components between them. Check the manufacturer series on your Parker components to ensure compatibility.
BSPP threads are also known as G threads.
| For Pipe Size | For Manufacturer Series | Lg. | Ht. | Dp. | Each | |
For NPT Threads | ||||||
|---|---|---|---|---|---|---|
| 1/8 | P31 | 1 9/16" | 1 7/16" | 1" | 00000000 | 000000 |
| 1/4 | P31 | 1 9/16" | 1 7/16" | 1" | 00000000 | 00000 |
| 3/8 | P31 | 1 9/16" | 1 7/16" | 1" | 00000000 | 00000 |
| 1/2 | P32, P33 | 2 1/8" | 1 3/4" | 1 5/8" | 00000000 | 00000 |
| 3/4 | P32, P33 | 2 1/8" | 1 3/4" | 1 5/8" | 00000000 | 00000 |
For BSPP Threads | ||||||
| 1/2 | P32, P33 | 2 1/8" | 1 3/4" | 1 5/8" | 00000000 | 00000 |
| 3/4 | P32, P33 | 2 1/8" | 1 3/4" | 1 5/8" | 00000000 | 00000 |
End Supports for Lead Screws and Ball Screws
A set of ball bearings reduces friction and secures the end of a ball or lead screw. Note: The end of your ball or lead screw must be machined before installing it into an end support.
End supports for radial loads handle loads perpendicular to the lead screw.
Face Mounting Holes | Top Mounting Holes | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | Ht. | Center Ht. | Wd. | Dp. | No. of Mounting Holes | Dia. | Ctr.-to-Ctr. Wd. | Ctr.-to-Ctr. Ht. | Dia. | Ctr.-to-Ctr. Wd. | Temperature Range, °F | Each | |
Alloy Steel | |||||||||||||
| 23/64" | 2" | 1" | 2 3/4" | 3/4" | 6 | 9/32" | 2" | 1 3/8" | 9/32" | 2" | -40° to 210° | 000000000 | 0000000 |
| 15/32" | 1 7/8" | 1" | 3" | 61/64" | 6 | 9/32" | 2 1/4" | 1 1/8" | 13/32" | 2 1/4" | -40° to 210° | 000000000 | 000000 |
| 19/32" | 2 1/8" | 1 1/8" | 3 1/2" | 1 1/64" | 6 | 9/32" | 2 1/2" | 1 3/8" | 13/32" | 2 1/2" | -40° to 210° | 000000000 | 000000 |
| 25/32" | 2 3/4" | 1 7/16" | 4 1/2" | 1 7/64" | 6 | 15/32" | 3 1/4" | 1 3/4" | 21/32" | 3 1/4" | -40° to 210° | 0000000 | 000000 |
| 1 3/16" | 3 5/8" | 1 7/8" | 6 1/2" | 1 21/32" | 6 | 21/32" | 4 3/4" | 2" | 29/32" | 4 3/4" | -40° to 210° | 000000000 | 000000 |
End supports for combined radial and thrust loads handle radial loads (perpendicular to the lead screw) and thrust loads (parallel to the lead screw).
Combined Load Cap., lbs. | Face Mounting Holes | Top Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | Ht. | Center Ht. | Wd. | Dp. | Static | Dynamic | No. of Mounting Holes | Dia. | Ctr.-to-Ctr. Wd. | Ctr.-to-Ctr. Ht. | Dia. | Ctr.-to-Ctr. Wd. | Temperature Range, °F | Each | |
Alloy Steel | |||||||||||||||
| 23/64" | 2" | 1" | 2 3/4" | 1 51/64" | 1,000 | 440 | 6 | 9/32" | 2" | 1 3/8" | 9/32" | 2" | -40° to 210° | 00000000 | 0000000 |
| 15/32" | 1 7/8" | 1" | 3" | 1 11/16" | 1,600 | 630 | 6 | 9/32" | 2 1/4" | 1 1/8" | 13/32" | 2 1/4" | -40° to 210° | 00000000 | 000000 |
| 19/32" | 2 1/8" | 1 1/8" | 3 1/2" | 1 27/32" | 2,300 | 1,050 | 6 | 9/32" | 2 1/2" | 1 3/8" | 13/32" | 2 1/2" | -40° to 210° | 00000000 | 000000 |
| 43/64" | 2 3/8" | 1 1/4" | 4" | 2 19/64" | 3,200 | 1,550 | 6 | 13/32" | 2 7/8" | 1 3/8" | 17/32" | 2 7/8" | -40° to 210° | 000000000 | 000000 |
| 25/32" | 2 3/4" | 1 7/16" | 4 1/2" | 2 21/64" | 3,200 | 1,800 | 6 | 15/32" | 3 1/4" | 1 3/4" | 21/32" | 3 1/4" | -40° to 210° | 00000000 | 000000 |
| 63/64" | 3 3/8" | 1 3/4" | 6" | 2 29/32" | 3,750 | 2,100 | 6 | 21/32" | 4 1/4" | 2" | 29/32" | 4 1/4" | -40° to 210° | 00000000 | 00000000 |
| 1 3/16" | 3 5/8" | 1 7/8" | 6 1/2" | 3" | 5,200 | 3,050 | 6 | 21/32" | 4 3/4" | 2" | 29/32" | 4 3/4" | -40° to 210° | 00000000 | 00000000 |
| 1 49/64" | 5 5/8" | 2 13/16" | 8 1/2" | 4 5/32" | 15,000 | 9,000 | 10 | 13/16" | 6 5/8" | 3 5/8" | 1 1/32" | 6 5/8" | -40° to 210° | 00000000 | 00000000 |
Metric End Supports for Lead Screws and Ball Screws
A set of ball bearings reduces friction and secures the end of a ball or lead screw. End supports handle radial loads (perpendicular to the lead screw) and thrust loads (parallel to the lead screw). Note: The end of your ball or lead screw must be machined before installing it into an end support.
Combined Load Cap., lbs. | Top Mounting Holes | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| ID, mm | Ht., mm | Center Ht., mm | Wd., mm | Dp., mm | Static | Dynamic | Dia. | Ctr.-to-Ctr. Wd., mm | Temperature Range, °F | Each | |
For Combined Radial and Thrust Loads | |||||||||||
Carbon Steel | |||||||||||
| 12 | 43 | 25 | 60 | 34 | 730 | 1,450 | 6.6 | 46 | 0° to 160° | 0000000 | 0000000 |
| 15 | 48 | 28 | 70 | 38 | 890 | 1,700 | 6.6 | 54 | 0° to 160° | 0000000 | 000000 |
| 17 | 64 | 39 | 86 | 51 | 1,300 | 3,050 | 9 | 68 | 0° to 160° | 0000000 | 000000 |