Get longer life when milling hard material with these end mills—their 10° corner chamfer has a stronger cutting edge compared to standard square end mills. However, they don’t create as sharp of a corner. Grooves on the shank allow coolant to flow directly to the cutting edge, helping to reduce heat, extend tool life, and improve the evacuation of chips. This makes these end mills able to cut materials that are difficult to machine, such as stainless steel, titanium, and hardened steel. They have a square end for milling square-bottomed slots, pockets, and edges. Unlike typical noncenter-cutting end mills, these are designed for heavy plunge cuts.

Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish on hard material. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking.

A titanium aluminum nitride (TiAlN) coating allows them to dissipate heat better than other end mills, especially at high speeds. At high temperatures, the coating creates a layer of aluminum oxide that transfers heat to the chips, keeping the tool cool, even when used without lubrication. This makes these good for aggressive machining while roughing or making interrupted cuts.