Use these tools with low-horsepower, manual milling machines. They have clamps for holding inserts that do not have a mounting hole. Replaceable carbide-insert end mills reduce waste and cost in high-volume jobs—when the cutting edges dull, replace the carbide inserts instead of the entire tool. End mills have a square cut style for milling square slots, pockets, and edges. All are noncenter-cutting for operations where the sides of the teeth do most of the work, such as shoulder milling, contouring, and finishing. They cannot be used for plunge cuts.

R8-shank end mills have internal threads on the tapered end for connecting to a drawbar.

Carbide inserts have a wear-resistant titanium-nitride (TiN) coating.

Pair these carbide inserts with our Replaceable Carbide-Insert End Mills. They have a mounting hole that allows you to fasten them directly to the end mill for a hold that's strong enough to handle the high speeds of a CNC machine. All have a positive rake, which means the cutting edge is angled to reduce vibration and prevent thin pieces from bending. All have chip breakers that prevent the creation of long chips, which can damage tooling and restrict the flow of coolant.

Use uncoated inserts for general purpose milling and short production runs. Use aluminum-titanium-chromium-nitride (AlTiCrN) coated inserts for demanding, high-speed jobs in hard material. They’re harder and more wear resistant than uncoated carbide inserts.

For technical drawings and 3-D models, click on a part number.

Use these end mills for general purpose work in most material, such as aluminum, brass, bronze, iron, and steel. They have scooped corners for rounding the sharp edges of your workpiece.

For technical drawings and 3-D models, click on a part number.

With better heat and wear resistance than high-speed steel, these cobalt steel end mills run at higher speeds and provide better performance on hard material. They have scooped corners for rounding the sharp edges of your workpiece.

For technical drawings and 3-D models, click on a part number.

Use these end mills for general purpose work in most material, such as aluminum, brass, bronze, iron, and steel. Their angled profile allows chamfer, bevel, and other angled cuts. A titanium-nitride (TiN) coating reduces friction and provides increased wear resistance.

For technical drawings and 3-D models, click on a part number.

Mill an angled edge to the entire outside diameter of pipe, tubes, and rods in a single pass with more speed and precision than a handheld scraper. These end mills deburr pipe and tube for butt welds and shape rods for sliding into housings and holes. They attach to screw machines, lathes, and drill presses and can be set up to repeat cuts for multiple pipes. Staggered cutting edges reduce vibration, resulting in a smooth finish. They have teeth that distribute cutting force and extend the life of the tool. Made of high-speed steel, they work with a variety of metals. Attach to your machine with a shank (sold separately).

Use these end mills for general purpose keyseat cutting in a wide range of material, including aluminum, iron, and steel. They mill precise notches in rotary shafts to fit machine keys and can also be used for slot milling.

For technical drawings and 3-D models, click on a part number.

With better heat and wear resistance than high-speed steel, these cobalt steel keyseat cutters can run at higher speeds and provide better performance on hard material. They mill precise notches in rotary shafts to fit machine keys and can also be used for slot milling.

Made of solid carbide, these keyseat cutters are harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material. They have an alternating right- and left-hand tooth style for removing more material at high speeds than straight-tooth keyseat cutters. They mill precise notches in rotary shafts to fit machine keys and can also be used for slot milling.

For technical drawings and 3-D models, click on a part number.

Use these end mills for general purpose keyseat cutting in a wide range of material, including aluminum, iron, and steel. An alternating right- and left-hand tooth style allows them to remove more material at high speeds than straight-tooth keyseat cutters. They mill precise notches in rotary shafts to fit machine keys and can also be used for slot milling.

For technical drawings and 3-D models, click on a part number.

Use these end mills for general purpose work in most material, such as aluminum, brass, bronze, iron, and steel. With curved, side-cutting teeth, they create grooves.

A scalloped profile creates rounded, outward-curving edges in a wide variety of material—from aluminum and brass to steel and plastic.

For technical drawings and 3-D models, click on a part number.

Also known as shell cutters, these high-speed steel cutters are good for face and side milling. They have a large mill diameter for removing a large amount of material per pass. Compared to fly cutters, they’re more rigid, which makes for a better finish. Use with an R8 shank arbor (sold separately).

For technical drawings and 3-D models, click on a part number.

These general purpose saws are good for cutoff, slitting, and slotting applications in a wide range of materials, including aluminum, iron, and steel. Use with an arbor (sold separately).

Saws with 1 1/4"-2 1/2" and 3"-8" mill dia. are also known as plain metal slitting saws.

For technical drawings and 3-D models, click on a part number.

Made of solid carbide, these saws are harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material. Use them for cutoff, slitting, and slotting applications. Use with an arbor (sold separately).

For technical drawings and 3-D models, click on a part number.