McMaster-Carr logo
    Filter by
    System of Measurement
    Number of Flutes
    Cut Style
    End Mill Type
    Material
    Shank Diameter
    Attribute Image
    Number of Milling Ends
    Flute Type
    Helix Angle
    Attribute Image
    Sold As
    Shank Type
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Flute Spacing
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Performance
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    44 Products

    Carbide Square End Mills

    Image of Product. Front orientation. End Mills. Carbide Square End Mills, 2 Flutes.
    Image of Product. Front orientation. End Mills. Carbide Square End Mills, 3 Flutes.
    Image of Product. Front orientation. End Mills. Carbide Square End Mills, 4 Flutes.

    2 Flutes

    3 Flutes

    4 Flutes

    For longer tool life and a better finish in general purpose milling applications, these solid carbide end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel end mills. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking. They have a square end for milling square slots, pockets, and edges.
    End mills with fewer flutes provide better chip clearance for high-volume, high-speed plunge, slotting, and roughing cuts; end mills with more flutes provide a finer finish and operate with less vibration when run at high speeds.
    Uncoated Carbide—Use uncoated end mills for general purpose milling and short production runs. They stay sharper than coated end mills when used on soft materials like aluminum, leaving a better finish.
    Titanium Nitride (TiN)-Coated Carbide—Titanium nitride (TiN)-coated end mills create less friction than uncoated end mills, which means they last longer when run at similar speeds. Use coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. They’re more wear resistant than uncoated end mills.
    Titanium Carbon Nitride (TiCN)-Coated Carbide—Titanium carbon nitride (TiCN)-coated end mills have a hard, smooth finish that resists chipping and wear and prevents material from accumulating on the cutting edge. They’re especially good for use in aluminum. Use coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. They’re more wear resistant than uncoated end mills.
    Titanium Aluminum Nitride (TiAlN)-Coated Carbide—Titanium aluminum nitride (TiAlN)-coated end mills dissipate heat better than other end mills, especially at high speeds. At high temperatures, the coating creates a layer of aluminum oxide that transfers heat to the chips, keeping the tool cool, even when used without lubrication. Use coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. They’re more wear resistant than uncoated end mills.
    Center Cutting—Center-cutting end mills allow plunge cuts into a surface.
    Mill
    Dia.
    Dia. Tolerance
    Shank
    Dia.
    Lg. of
    Cut
    Overall
    Lg.
    Flute
    Spacing
    Helix
    Angle
    For Use On
    End Mill Type
    Cut
    Style
    Each
    Uncoated Carbide
     
    2 Flutes
    11/64"-0.0020" to 0.0000"3/16"5/8"2"Equal30°Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingSquare8876A34000000
     
    3 Flutes
    11/64"-0.0020" to 0.0000"3/16"5/8"2"Equal30°Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingSquare88815A2200000
     
    4 Flutes
    11/64"-0.0020" to 0.0000"3/16"5/8"2"Equal30°Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingSquare3066A3200000
     
    Titanium Nitride (TiN)-Coated Carbide
     
    2 Flutes
    11/64"-0.0020" to 0.0000"3/16"5/8"2"Equal30°Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingSquare8923A2800000
     
    3 Flutes
    11/64"-0.0020" to 0.0000"3/16"5/8"2"Equal30°Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingSquare8923A22200000
     
    4 Flutes
    11/64"-0.0020" to 0.0000"3/16"5/8"2"Equal30°Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingSquare8923A700000
     
    Titanium Carbon Nitride (TiCN)-Coated Carbide
     
    2 Flutes
    11/64"-0.0020" to 0.0000"3/16"5/8"2"Equal30°Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, SteelCenter CuttingSquare8515A1500000
     
    3 Flutes
    11/64"-0.0020" to 0.0000"3/16"5/8"2"Equal30°Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, SteelCenter CuttingSquare8515A22200000
     
    4 Flutes
    11/64"-0.0020" to 0.0000"3/16"5/8"2"Equal30°Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, SteelCenter CuttingSquare8515A7900000
     
    Titanium Aluminum Nitride (TiAlN)-Coated Carbide
     
    2 Flutes
    11/64"-0.0020" to 0.0000"3/16"5/8"2"Equal30°Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingSquare8926A24100000
     
    3 Flutes
    11/64"-0.0020" to 0.0000"3/16"5/8"2"Equal30°Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingSquare8927A22100000
     
    4 Flutes
    11/64"-0.0020" to 0.0000"3/16"5/8"2"Equal30°Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingSquare8928A24100000
     

    High-Speed Steel Square End Mills

    Image of Product. Front orientation. End Mills. High-Speed Steel Square End Mills, 2 Flutes.

    2 Flutes

    Image of Product. Front orientation. End Mills. High-Speed Steel Square End Mills, 4 Flutes.

    4 Flutes

    Use these end mills for general purpose milling in most material, such as aluminum, brass, bronze, iron, and steel. They have a square end for milling square slots, pockets, and edges.
    End mills with fewer flutes provide better chip clearance for high-volume, high-speed plunge, slotting, and roughing cuts; end mills with more flutes provide a finer finish and operate with less vibration when run at high speeds.
    Uncoated High-Speed Steel—Use uncoated end mills for general purpose milling and short production runs.
    Titanium Nitride (TiN)-Coated High-Speed Steel—Use titanium nitride (TiN)-coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. They’re more wear resistant than uncoated end mills, which means they last longer when run at similar speeds.
    Center Cutting—Center-cutting end mills allow plunge cuts into a surface.
    Mill
    Dia.
    Dia. Tolerance
    Shank
    Dia.
    Lg. of
    Cut
    Overall
    Lg.
    Flute
    Spacing
    Helix
    Angle
    For Use On
    End Mill Type
    Cut
    Style
    Each
    Uncoated High-Speed Steel
     
    2 Flutes
    11/64"0.000" to 0.001"3/8"7/16"2 5/16"Equal30°Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, SteelCenter CuttingSquare3051A25000000
     
    4 Flutes
    11/64"0.000" to 0.0015"3/8"1/2"2 3/8"Equal30°Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, SteelCenter CuttingSquare3056A21100000
     
    Titanium Nitride (TiN)-Coated High-Speed Steel
     
    2 Flutes
    11/64"0.000" to 0.001"3/8"7/16"2 5/16"Equal30°Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Tool SteelCenter CuttingSquare8949A81200000
     
    4 Flutes
    11/64"0.000" to 0.0015"3/8"1/2"2 3/8"Equal30°Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Tool SteelCenter CuttingSquare8918A11100000
     

    Carbide Ball End Mills

    Image of ProductInUse. Ball Cut Style. Front orientation. Ball Cut Style. Carbide Ball End Mills.

    Ball Cut Style

    Image of Product. Front orientation. End Mills. Carbide Ball End Mills, 2 Flutes.

    2 Flutes

    Image of Product. Front orientation. End Mills. Carbide Ball End Mills, 3 Flutes.

    3 Flutes

    Image of Product. Front orientation. End Mills. Carbide Ball End Mills, 4 Flutes.

    4 Flutes

    For longer tool life and a better finish in general purpose milling applications, these solid carbide end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel end mills. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking. They have a ball end for milling rounded slots, slopes, and contours. All are center cutting, allowing plunge cuts into a surface.
    End mills with fewer flutes provide better chip clearance for high-volume, high-speed plunge, slotting, and roughing cuts; end mills with more flutes provide a finer finish and operate with less vibration when run at high speeds.
    Uncoated Carbide—Use uncoated end mills for general purpose milling and short production runs.
    Titanium Nitride (TiN)-Coated Carbide—Titanium nitride (TiN)-coated end mills create less friction than uncoated end mills, which means they last longer when run at similar speeds. Use coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. They’re more wear resistant than uncoated end mills.
    Titanium Carbon Nitride (TiCN)-Coated Carbide—Titanium carbon nitride (TiCN)-coated end mills have a hard, smooth finish that resists chipping and wear and prevents material from accumulating on the cutting edge. They’re especially good for use in aluminum. Use coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. They’re more wear resistant than uncoated end mills.
    Titanium Aluminum Nitride (TiAlN)-Coated Carbide—Titanium aluminum nitride (TiAlN)-coated end mills dissipate heat better than other end mills, especially at high speeds. At high temperatures, the coating creates a layer of aluminum oxide that transfers heat to the chips, keeping the tool cool, even when used without lubrication. Use coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. They’re more wear resistant than uncoated end mills.
    Mill
    Dia.
    Dia. Tolerance
    Shank
    Dia.
    Lg. of
    Cut
    Overall
    Lg.
    Flute
    Spacing
    Helix
    Angle
    For Use On
    End Mill Type
    Cut
    Style
    Each
    Uncoated Carbide
     
    2 Flutes
    11/64"-0.0020" to 0.0000"3/16"9/16"2"Equal30°Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingBall8878A38000000
     
    3 Flutes
    11/64"-0.0020" to 0.0000"3/16"9/16"2"Equal30°Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingBall88825A2200000
     
    4 Flutes
    11/64"-0.0020" to 0.0000"3/16"9/16"2"Equal30°Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingBall88805A2200000
     
    Titanium Nitride (TiN)-Coated Carbide
     
    2 Flutes
    11/64"-0.0020" to 0.0000"3/16"9/16"2"Equal30°Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingBall8885A24100000
     
    3 Flutes
    11/64"-0.0020" to 0.0000"3/16"9/16"2"Equal30°Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingBall8886A22100000
     
    4 Flutes
    11/64"-0.0020" to 0.0000"3/16"9/16"2"Equal30°Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingBall8887A24100000
     
    Titanium Carbon Nitride (TiCN)-Coated Carbide
     
    2 Flutes
    11/64"-0.0020" to 0.0000"3/16"9/16"2"Equal30°Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, SteelCenter CuttingBall8885A24200000
     
    3 Flutes
    11/64"-0.0020" to 0.0000"3/16"9/16"2"Equal30°Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, SteelCenter CuttingBall8886A22200000
     
    4 Flutes
    11/64"-0.0020" to 0.0000"3/16"9/16"2"Equal30°Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, SteelCenter CuttingBall8887A24200000
     
    Titanium Aluminum Nitride (TiAlN)-Coated Carbide
     
    2 Flutes
    11/64"-0.0020" to 0.0000"3/16"9/16"2"Equal30°Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingBall8885A24300000
     
    3 Flutes
    11/64"-0.0020" to 0.0000"3/16"9/16"2"Equal30°Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingBall8886A22300000
     
    4 Flutes
    11/64"-0.0020" to 0.0000"3/16"9/16"2"Equal30°Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingBall8887A24300000
     

    High-Speed Steel Square End Mills with Two Milling Ends

    Image of Product. Front orientation. End Mills. High-Speed Steel Square End Mills with Two Milling Ends, 2 Flutes.

    2 Flutes

    Image of Product. Front orientation. End Mills. High-Speed Steel Square End Mills with Two Milling Ends, 4 Flutes.

    4 Flutes

    When one end wears out, switch to the opposite end for two times the life of a standard high-speed steel end mill. Made of high-speed steel, these end mills are for general purpose milling in most material, such as aluminum, brass, bronze, iron, and steel. Their square ends make them good for milling square slots, pockets, and edges. All are center cutting, allowing plunge cuts into a surface.
    End mills with fewer flutes provide better chip clearance for high-volume, high-speed plunge, slotting, and roughing cuts; end mills with more flutes provide a finer finish and operate with less vibration when run at high speeds.
    Uncoated High-Speed Steel—Use uncoated end mills for general purpose milling and short production runs.
    Titanium Nitride (TiN)-Coated High-Speed Steel—Use titanium nitride (TiN)-coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. They’re more wear resistant than uncoated end mills, which means they last longer when run at similar speeds.
    Mill
    Dia.
    Dia. Tolerance
    Shank
    Dia.
    Lg. of
    Cut
    Overall
    Lg.
    Flute
    Spacing
    Helix
    Angle
    For Use On
    End Mill Type
    Cut
    Style
    Each
    Uncoated High-Speed Steel
     
    2 Flutes
    11/64"-0.0015" to 0.0000"3/16"1/4"2"Equal35°Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, SteelCenter CuttingSquare2802A22000000
    11/64"-0.0015" to 0.0000"3/16"1/2"2 1/4"Equal35°Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, SteelCenter CuttingSquare2802A3600000
    11/64"-0.0015" to 0.0000"3/8"7/16"3 1/8"Equal30°Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, SteelCenter CuttingSquare3049A500000
     
    4 Flutes
    11/64"-0.0025" to 0.0000"3/8"1/2"3 1/4"Equal30°Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, SteelCenter CuttingSquare2873A2300000
     
    Titanium Nitride (TiN)-Coated High-Speed Steel
     
    2 Flutes
    11/64"-0.0015" to 0.0000"3/8"7/16"3 1/8"Equal30°Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Tool SteelCenter CuttingSquare8924A8100000
     
    4 Flutes
    11/64"-0.0025" to 0.0000"3/8"1/2"3 1/4"Equal30°Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Tool SteelCenter CuttingSquare8912A2300000
     

    Carbide Square End Mills with Two Milling Ends

    Image of Product. Front orientation. End Mills. Carbide Square End Mills with Two Milling Ends, 4 Flutes.

    4 Flutes

    When one end wears out, switch to the opposite end for two times the life of a standard carbide end mill. Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking. They have square ends for milling square slots, pockets, and edges. All are center cutting, allowing plunge cuts into a surface.
    Uncoated Carbide—Use uncoated end mills for general purpose milling and short production runs.
    Titanium Nitride (TiN)-Coated Carbide—Titanium nitride (TiN)-coated end mills create less friction than uncoated end mills, which means they last longer when run at similar speeds. Use coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. They’re more wear resistant than uncoated end mills.
    Titanium Carbon Nitride (TiCN)-Coated Carbide—Titanium carbon nitride (TiCN)-coated end mills have a hard, smooth finish that resists chipping and wear and prevents material from accumulating on the cutting edge. They’re especially good for use in aluminum. Use coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. They’re more wear resistant than uncoated end mills.
    Titanium Aluminum Nitride (TiAlN)-Coated Carbide—Titanium aluminum nitride (TiAlN)- and aluminum titanium nitride (AlTiN)-coated end mills dissipate heat better than other end mills, especially at high speeds. At high temperatures, the coating creates a layer of aluminum oxide that transfers heat to the chips, keeping the tool cool, even when used without lubrication. Aluminum titanium nitride (AlTiN) has a higher percentage of aluminum than titanium aluminum nitride (TiAlN). Use coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. They’re more wear resistant than uncoated end mills.
    4 Flutes—End mills with four flutes provide a finer finish and operate with less vibration when run at high speeds.
    Mill
    Dia.
    Dia. Tolerance
    Shank
    Dia.
    Lg. of
    Cut
    Overall
    Lg.
    Flute
    Spacing
    Helix
    Angle
    For Use On
    End Mill Type
    Cut
    Style
    Each
    Uncoated Carbide
     
    4 Flutes
    11/64"-0.002" to 0.000"3/16"5/16"2"Equal30°Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingSquare8889A37000000
     
    Titanium Nitride (TiN)-Coated Carbide
     
    4 Flutes
    11/64"-0.002" to 0.000"3/16"5/16"2"Equal30°Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingSquare27375A42300000
     
    Titanium Carbon Nitride (TiCN)-Coated Carbide
     
    4 Flutes
    11/64"-0.002" to 0.000"3/16"5/16"2"Equal30°Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, SteelCenter CuttingSquare8889A69100000
     
    Titanium Aluminum Nitride (TiAlN)-Coated Carbide
     
    4 Flutes
    11/64"-0.002" to 0.000"3/16"5/16"2"Equal30°Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingSquare8889A69200000
     

    Cobalt Steel Square End Mills with Two Milling Ends

    Image of Product. Front orientation. End Mills. Cobalt Steel Square End Mills with Two Milling Ends, 2 Flutes.

    2 Flutes

    When one end wears out, switch to the opposite end for two times the life of a standard cobalt steel end mill. With better heat and wear resistance than high-speed steel, these cobalt steel end mills can run at higher speeds and provide better performance on hard material, such as iron, hardened steel, titanium, and tool steel. Their square ends make them good for milling square slots, pockets, and edges. All are center cutting, allowing plunge cuts into a surface.
    2 Flutes—End mills with two flutes provide better chip clearance for high-volume, high-speed plunge, slotting, and roughing cuts.
    Mill
    Dia.
    Dia. Tolerance
    Shank
    Dia.
    Lg. of
    Cut
    Overall
    Lg.
    Flute
    Spacing
    Helix
    Angle
    For Use On
    End Mill Type
    Cut
    Style
    Each
    Uncoated Cobalt Steel
     
    2 Flutes
    11/64"-0.0015" to 0.0000"3/16"1/4"2"Equal35°Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingSquare28425A41000000
    11/64"-0.0015" to 0.0000"3/16"1/2"2 1/4"Equal35°Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingSquare28425A2500000
     

    Cobalt Steel Ball End Mills with Two Milling Ends

    Image of ProductInUse. Ball Cut Style. Front orientation. Ball Cut Style. Cobalt Steel Ball End Mills with Two Milling Ends.
    Image of Product. Front orientation. End Mills. Cobalt Steel Ball End Mills with Two Milling Ends, 2 Flutes.

    Ball Cut Style

    2 Flutes

    When one end wears out, switch to the opposite end for two times the life of a standard cobalt steel end mill. With better heat and wear resistance than high-speed steel, these cobalt steel end mills can run at higher speeds and provide better performance on hard material, such as iron, hardened steel, titanium, and tool steel. Their ball ends make them good for milling rounded slots, slopes, and contours. All are center cutting, allowing plunge cuts into a surface.
    2 Flutes—End mills with two flutes provide better chip clearance for high-volume, high-speed plunge, slotting, and roughing cuts.
    Mill
    Dia.
    Dia. Tolerance
    Shank
    Dia.
    Lg. of
    Cut
    Overall
    Lg.
    Flute
    Spacing
    Helix
    Angle
    For Use On
    End Mill Type
    Cut
    Style
    Each
    Uncoated Cobalt Steel
     
    2 Flutes
    11/64"-0.0015" to 0.0000"3/16"1/4"2"Equal35°Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingBall2827A35000000
    11/64"-0.0015" to 0.0000"3/16"1/2"2 1/4"Equal35°Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool SteelCenter CuttingBall2827A3600000
     

    High-Speed Steel Ball End Mills with Two Milling Ends

    Image of ProductInUse. Ball Cut Style. Front orientation. Ball Cut Style. High-Speed Steel Ball End Mills with Two Milling Ends.
    Image of Product. Front orientation. End Mills. High-Speed Steel Ball End Mills with Two Milling Ends.

    Ball Cut Style

    When one end wears out, switch to the opposite end for two times the life of a standard high-speed steel end mill. Made of high-speed steel, these end mills are for general purpose milling in most material, such as aluminum, brass, bronze, iron, and steel. Their ball ends make them good for milling rounded slots, slopes, and contours. All are center cutting, allowing plunge cuts into a surface.
    Mill
    Dia.
    Dia. Tolerance
    Shank
    Dia.
    Lg. of
    Cut
    Overall
    Lg.
    Flute
    Spacing
    Helix
    Angle
    For Use On
    End Mill Type
    Cut
    Style
    Each
    Uncoated High-Speed Steel
     
    2 Flutes
    11/64"-0.0015" to 0.0000"3/16"1/4"2"Equal35°Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, SteelCenter CuttingBall2802A52000000
    11/64"-0.0015" to 0.0000"3/16"1/2"2 1/4"Equal35°Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, SteelCenter CuttingBall2802A6700000
     
    back to top