7/64" End Mills | McMaster-Carr

Filter by

System of Measurement

Mill Diameter

Number of Flutes

Cut Style

For Use On

Length of Cut

Shank Diameter

Material

End Mill Type

Number of Milling Ends

Finish

Diamondlike Carbon (DLC) Coated

Titanium Aluminum Nitride (TiAlN) Coated

Titanium Carbon Nitride (TiCN) Coated

Titanium Nitride (TiN) Coated

Overall Length

Sold As

Flute Type

Helix Angle

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

REACH

RoHS

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Flute Spacing

Shank Type

Length

Performance

44 Products

Miniature Carbide Square End Mills


2 Flutes	3 Flutes	4 Flutes

With a mill diameter less than _1/8" or 3 mm, these end mills are great for precise, detailed work such as in electronics, mold making, and medical-device manufacturing. They have a square end for milling square-bottomed slots, pockets, and edges. All are center cutting, allowing plunge cuts into a surface.

Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking.

End mills with fewer flutes provide better chip clearance for high-volume, high-speed plunge, slotting, and roughing cuts; end mills with more flutes provide a finer finish and operate with less vibration when run at high speeds.

Uncoated Carbide—Use uncoated end mills for general purpose milling and short production runs. They stay sharper than coated end mills when used on soft materials like aluminum, leaving a better finish.

Titanium Nitride (TiN)-Coated Carbide—Titanium nitride (TiN)-coated end mills create less friction than uncoated end mills, which means they last longer when run at similar speeds. Use coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. The coating reduces friction and vibration as they’re used, making them more wear resistant than uncoated end mills.

Titanium Carbon Nitride (TiCN)-Coated Carbide—Titanium carbon nitride (TiCN)-coated end mills have a hard, smooth finish that resists chipping and wear and prevents material from accumulating on the cutting edge. They’re especially good for use in aluminum. Use coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. The coating reduces friction and vibration as they’re used, making them more wear resistant than uncoated end mills.

Titanium Aluminum Nitride (TiAlN)-Coated Carbide—Titanium aluminum nitride (TiAlN)- and aluminum titanium nitride (AlTiN)-coated end mills dissipate heat better than other end mills, especially at high speeds. At high temperatures, the coating creates a layer of aluminum oxide that transfers heat to the chips, keeping the tool cool, even when used without lubrication. This makes these good for aggressive machining while roughing or making interrupted cuts. Use coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. The coating reduces friction and vibration as they’re used, making them more wear resistant than uncoated end mills.

	Mill
	Dia.	Dia. Tolerance	Shank Dia.	Lg. of Cut	Overall Lg.	Flute Spacing	Helix Angle	For Use On	End Mill Type	Cut Style		Each
Uncoated Carbide







				2 Flutes

				7/64"	-0.002" to 0"	1/8"	3/8"	1 1/2"	Equal	30°	Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Square	8876A32	000000




						3 Flutes

						7/64"	-0.002" to 0"	1/8"	3/8"	1 1/2"	Equal	30°	Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Square	88815A17	00000




								4 Flutes

								7/64"	-0.002" to 0"	1/8"	3/8"	1 1/2"	Equal	30°	Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Square	3066A29	00000


								Titanium Nitride (TiN)-Coated Carbide







												2 Flutes

												7/64"	-0.002" to 0"	1/8"	3/8"	1 1/2"	Equal	30°	Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Square	8923A26	00000




														3 Flutes

														7/64"	-0.002" to 0"	1/8"	3/8"	1 1/2"	Equal	30°	Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Square	8923A217	00000




																4 Flutes

																7/64"	-0.002" to 0"	1/8"	3/8"	1 1/2"	Equal	30°	Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Square	8923A68	00000


																Titanium Carbon Nitride (TiCN)-Coated Carbide







																				2 Flutes

																				7/64"	-0.002" to 0"	1/8"	3/8"	1 1/2"	Equal	30°	Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel	Center Cutting	Square	8515A13	00000




																				3 Flutes

		7/64"	-0.002" to 0"																	1/8"	3/8"	1 1/2"	Equal	30°	Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel	Center Cutting	Square	8515A217	00000




																				4 Flutes

				7/64"	-0.002" to 0"															1/8"	3/8"	1 1/2"	Equal	30°	Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel	Center Cutting	Square	8515A77	00000


				Titanium Aluminum Nitride (TiAlN)-Coated Carbide







																				2 Flutes

																				7/64"	-0.002" to 0"	1/8"	3/8"	1 1/2"	Equal	30°	Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Square	8926A171	00000




																				3 Flutes

										7/64"										-0.002" to 0"	1/8"	3/8"	1 1/2"	Equal	30°	Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Square	8927A171	00000




																				4 Flutes

												7/64"								-0.002" to 0"	1/8"	3/8"	1 1/2"	Equal	30°	Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Square	8928A171	00000

Miniature Carbide Ball End Mills

Ball Cut Style

2 Flutes

3 Flutes

4 Flutes

With a mill diameter less than _1/8", these end mills are great for precise, detailed work such as in electronics, mold making, and medical-device manufacturing. They have a ball end for milling rounded slots, slopes, and contours. All are center cutting, allowing plunge cuts into a surface.

Titanium Aluminum Nitride (TiAlN)-Coated Carbide—Titanium aluminum nitride (TiAlN)-coated end mills dissipate heat better than other end mills, especially at high speeds. At high temperatures, the coating creates a layer of aluminum oxide that transfers heat to the chips, keeping the tool cool, even when used without lubrication. This makes these good for aggressive machining while roughing or making interrupted cuts. Use coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. The coating reduces friction and vibration as they’re used, making them more wear resistant than uncoated end mills.

	Mill
	Dia.	Dia. Tolerance	Shank Dia.	Lg. of Cut	Overall Lg.	Flute Spacing	Helix Angle	For Use On	End Mill Type	Cut Style		Each
Uncoated Carbide







				2 Flutes

				7/64"	-0.002" to 0"	1/8"	3/8"	1 1/2"	Equal	30°	Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Ball	8878A36	000000




						3 Flutes

						7/64"	-0.002" to 0"	1/8"	3/8"	1 1/2"	Equal	30°	Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Ball	88825A17	00000




								4 Flutes

								7/64"	-0.002" to 0"	1/8"	3/8"	1 1/2"	Equal	30°	Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Ball	88805A17	00000


								Titanium Nitride (TiN)-Coated Carbide







												2 Flutes

												7/64"	-0.002" to 0"	1/8"	3/8"	1 1/2"	Equal	30°	Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Ball	8885A171	00000




														3 Flutes

														7/64"	-0.002" to 0"	1/8"	3/8"	1 1/2"	Equal	30°	Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Ball	8886A171	00000




																4 Flutes

																7/64"	-0.002" to 0"	1/8"	3/8"	1 1/2"	Equal	30°	Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Ball	8887A171	00000


																Titanium Carbon Nitride (TiCN)-Coated Carbide







																				2 Flutes

																				7/64"	-0.002" to 0"	1/8"	3/8"	1 1/2"	Equal	30°	Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel	Center Cutting	Ball	8885A172	00000




																				3 Flutes

		7/64"	-0.002" to 0"																	1/8"	3/8"	1 1/2"	Equal	30°	Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel	Center Cutting	Ball	8886A172	00000




																				4 Flutes

				7/64"	-0.002" to 0"															1/8"	3/8"	1 1/2"	Equal	30°	Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel	Center Cutting	Ball	8887A172	00000


				Titanium Aluminum Nitride (TiAlN)-Coated Carbide







																				2 Flutes

																				7/64"	-0.002" to 0"	1/8"	3/8"	1 1/2"	Equal	30°	Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Ball	8885A173	00000




																				3 Flutes

										7/64"										-0.002" to 0"	1/8"	3/8"	1 1/2"	Equal	30°	Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Ball	8886A173	00000




																				4 Flutes

												7/64"								-0.002" to 0"	1/8"	3/8"	1 1/2"	Equal	30°	Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Ball	8887A173	00000

Carbide Square End Mills for Carbon Fiber, Fiberglass, and Graphite

2 Flutes

4 Flutes

A diamond or diamondlike coating on these end mills makes them good for machining abrasive material, such as carbon fiber, fiberglass, and graphite. Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish on hard material. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking. They have a square end for milling square-bottomed slots, pockets, and edges. All are center cutting, allowing plunge cuts into a surface.

Diamondlike Carbon (DLC)-Coated Carbide—Diamondlike carbon (DLC)-coated end mills are an economical option for short runs and intermittent use.

	Mill
	Dia.	Dia. Tolerance	Shank Dia.	Lg. of Cut	Overall Lg.	Flute Spacing	Helix Angle	For Use On	End Mill Type	Cut Style		Each
Diamondlike Carbon (DLC)-Coated Carbide







				2 Flutes

				7/64"	-0.0005" to 0.0005"	1/8"	35/64"	1 1/2"	Equal	33°	Carbon Fiber, Fiberglass, Graphite	Center Cutting	Square	4083A14	000000




						4 Flutes

						7/64"	-0.0005" to 0.0005"	1/8"	35/64"	1 1/2"	Equal	33°	Carbon Fiber, Fiberglass, Graphite	Center Cutting	Square	4119A14	00000

High-Speed Steel Square End Mills with Two Milling Ends

2 Flutes

When one end wears out, switch to the opposite end for two times the life of a standard high-speed steel end mill. Made of high-speed steel, these end mills are for general purpose milling in most material, such as aluminum, brass, bronze, iron, and steel. Their square ends make them good for milling square slots, pockets, and edges. All are center cutting, allowing plunge cuts into a surface.

Uncoated High-Speed Steel—Use uncoated end mills for general purpose milling and short production runs.

Titanium Nitride (TiN)-Coated High-Speed Steel—Use titanium nitride (TiN)-coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. They’re more wear resistant than uncoated end mills, which means they last longer when run at similar speeds.

	Mill
	Dia.	Dia. Tolerance	Shank Dia.	Lg. of Cut	Overall Lg.	Flute Spacing	Helix Angle	For Use On	End Mill Type	Cut Style		Each
Uncoated High-Speed Steel







				2 Flutes

				7/64"	-0.0015" to 0.0000"	3/16"	5/32"	2"	Equal	35°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	Center Cutting	Square	2802A17	000000


				7/64"	-0.0015" to 0.0000"	3/16"	21/64"	2 1/4"	Equal	35°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	Center Cutting	Square	2802A32	00000
				7/64"	-0.0015" to 0.0000"	3/8"	3/8"	3 1/16"	Equal	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	Center Cutting	Square	3049A155	00000


				Titanium Nitride (TiN)-Coated High-Speed Steel







								2 Flutes

								7/64"	-0.0015" to 0.0000"	3/8"	3/8"	3 1/16"	Equal	30°	Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Tool Steel	Center Cutting	Square	8924A52	00000

Carbide Square End Mills with Two Milling Ends

4 Flutes

When one end wears out, switch to the opposite end for two times the life of a standard carbide end mill. Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking. They have square ends for milling square slots, pockets, and edges. All are center cutting, allowing plunge cuts into a surface.

Uncoated Carbide—Use uncoated end mills for general purpose milling and short production runs.

Titanium Nitride (TiN)-Coated Carbide—Titanium nitride (TiN)-coated end mills create less friction than uncoated end mills, which means they last longer when run at similar speeds. Use coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. They’re more wear resistant than uncoated end mills.

Titanium Carbon Nitride (TiCN)-Coated Carbide—Titanium carbon nitride (TiCN)-coated end mills have a hard, smooth finish that resists chipping and wear and prevents material from accumulating on the cutting edge. They’re especially good for use in aluminum. Use coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. They’re more wear resistant than uncoated end mills.

Titanium Aluminum Nitride (TiAlN)-Coated Carbide—Titanium aluminum nitride (TiAlN)- and aluminum titanium nitride (AlTiN)-coated end mills dissipate heat better than other end mills, especially at high speeds. At high temperatures, the coating creates a layer of aluminum oxide that transfers heat to the chips, keeping the tool cool, even when used without lubrication. Aluminum titanium nitride (AlTiN) has a higher percentage of aluminum than titanium aluminum nitride (TiAlN). Use coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. They’re more wear resistant than uncoated end mills.

4 Flutes—End mills with four flutes provide a finer finish and operate with less vibration when run at high speeds.

	Mill
	Dia.	Dia. Tolerance	Shank Dia.	Lg. of Cut	Overall Lg.	Flute Spacing	Helix Angle	For Use On	End Mill Type	Cut Style		Each
Uncoated Carbide







				4 Flutes

				7/64"	-0.002" to 0.000"	1/8"	3/16"	1 1/2"	Equal	30°	Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Square	8889A34	000000


				Titanium Nitride (TiN)-Coated Carbide







								4 Flutes

								7/64"	-0.002" to 0.000"	1/8"	3/16"	1 1/2"	Equal	30°	Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Square	27375A416	00000


								Titanium Carbon Nitride (TiCN)-Coated Carbide







												4 Flutes

												7/64"	-0.002" to 0.000"	1/8"	3/16"	1 1/2"	Equal	30°	Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel	Center Cutting	Square	8889A161	00000


												Titanium Aluminum Nitride (TiAlN)-Coated Carbide







																4 Flutes

																7/64"	-0.002" to 0.000"	1/8"	3/16"	1 1/2"	Equal	30°	Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Square	8889A162	00000

Cobalt Steel Square End Mills with Two Milling Ends

2 Flutes

When one end wears out, switch to the opposite end for two times the life of a standard cobalt steel end mill. With better heat and wear resistance than high-speed steel, these cobalt steel end mills can run at higher speeds and provide better performance on hard material, such as iron, hardened steel, titanium, and tool steel. Their square ends make them good for milling square slots, pockets, and edges. All are center cutting, allowing plunge cuts into a surface.

2 Flutes—End mills with two flutes provide better chip clearance for high-volume, high-speed plunge, slotting, and roughing cuts.

	Mill
	Dia.	Dia. Tolerance	Shank Dia.	Lg. of Cut	Overall Lg.	Flute Spacing	Helix Angle	For Use On	End Mill Type	Cut Style		Each
Uncoated Cobalt Steel







				2 Flutes

				7/64"	-0.0015" to 0.0000"	3/16"	5/32"	2"	Equal	35°	Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Square	28425A36	000000


				7/64"	-0.0015" to 0.0000"	3/16"	21/64"	2 1/4"	Equal	35°	Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Square	28425A18	00000

Carbide Ball End Mills for Carbon Fiber, Fiberglass, and Graphite

Ball Cut Style

2 Flutes

4 Flutes

These end mills have a diamond or diamondlike coating for machining abrasive material, such as carbon fiber, fiberglass, and graphite. Made of solid carbide, they are harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking. They have a ball end for milling rounded slots, slopes, and contours. All are center cutting, allowing plunge cuts into a surface.

Diamondlike Carbon (DLC)-Coated Carbide—Diamondlike carbon (DLC) coated end mills are an economical option for short runs and intermittent use.

	Mill
	Dia.	Dia. Tolerance	Shank Dia.	Lg. of Cut	Overall Lg.	Flute Spacing	Helix Angle	For Use On	End Mill Type	Cut Style		Each
Diamondlike Carbon (DLC)-Coated Carbide







				2 Flutes

				7/64"	-0.001" to 0.0005"	1/8"	35/64"	1 1/2"	Equal	33°	Carbon Fiber, Fiberglass, Graphite	Center Cutting	Ball	4083A34	000000




						4 Flutes

						7/64"	-0.001" to 0.0005"	1/8"	35/64"	1 1/2"	Equal	33°	Carbon Fiber, Fiberglass, Graphite	Center Cutting	Ball	4119A34	00000

Cobalt Steel Ball End Mills with Two Milling Ends


Ball Cut Style	2 Flutes

When one end wears out, switch to the opposite end for two times the life of a standard cobalt steel end mill. With better heat and wear resistance than high-speed steel, these cobalt steel end mills can run at higher speeds and provide better performance on hard material, such as iron, hardened steel, titanium, and tool steel. Their ball ends make them good for milling rounded slots, slopes, and contours. All are center cutting, allowing plunge cuts into a surface.

2 Flutes—End mills with two flutes provide better chip clearance for high-volume, high-speed plunge, slotting, and roughing cuts.

	Mill
	Dia.	Dia. Tolerance	Shank Dia.	Lg. of Cut	Overall Lg.	Flute Spacing	Helix Angle	For Use On	End Mill Type	Cut Style		Each
Uncoated Cobalt Steel







				2 Flutes

				7/64"	-0.0015" to 0.0000"	3/16"	5/32"	2"	Equal	35°	Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Ball	2827A24	000000


				7/64"	-0.0015" to 0.0000"	3/16"	21/64"	2 1/4"	Equal	35°	Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Ball	2827A25	00000

Carbide Ball End Mills with Two Milling Ends

Ball Cut Style

4 Flutes

When one end wears out, switch to the opposite end for two times the life of a standard carbide end mill. Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking. They have a ball end for milling rounded slots, slopes, and contours. All are center cutting, allowing plunge cuts into a surface.

Uncoated Carbide—Use uncoated end mills for general purpose milling and short production runs.

Titanium Nitride (TiN)-Coated Carbide—Use titanium nitride (TiN)-coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. They’re more wear resistant than uncoated end mills, which means they last longer when run at similar speeds.

4 Flutes—End mills with four flutes provide a finer finish and operate with less vibration when run at high speeds.

	Mill
	Dia.	Dia. Tolerance	Shank Dia.	Lg. of Cut	Overall Lg.	Flute Spacing	Helix Angle	For Use On	End Mill Type	Cut Style		Each
Uncoated Carbide







				4 Flutes

				7/64"	-0.002" to 0.000"	1/8"	3/16"	1 1/2"	Equal	30°	Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Ball	8766A16	000000


				Titanium Nitride (TiN)-Coated Carbide







								4 Flutes

								7/64"	-0.002" to 0.000"	1/8"	3/16"	1 1/2"	Equal	30°	Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel	Center Cutting	Ball	27375A616	00000

High-Speed Steel Ball End Mills with Two Milling Ends


Ball Cut Style

When one end wears out, switch to the opposite end for two times the life of a standard high-speed steel end mill. Made of high-speed steel, these end mills are for general purpose milling in most material, such as aluminum, brass, bronze, iron, and steel. Their ball ends make them good for milling rounded slots, slopes, and contours. All are center cutting, allowing plunge cuts into a surface.

	Mill
	Dia.	Dia. Tolerance	Shank Dia.	Lg. of Cut	Overall Lg.	Flute Spacing	Helix Angle	For Use On	End Mill Type	Cut Style		Each
Uncoated High-Speed Steel







				2 Flutes

				7/64"	-0.0015" to 0.0000"	3/16"	5/32"	2"	Equal	35°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	Center Cutting	Ball	2802A47	000000


				7/64"	-0.0015" to 0.0000"	3/16"	21/64"	2 1/4"	Equal	35°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	Center Cutting	Ball	2802A63	00000