We will reply to your message within an hour.
Also resistant to salt water.
Form a snug seal on grooved-end pipe fittings where water is a concern. Made of EPDM rubber, these gaskets won't break down from contact with water.
Made of EPDM rubber, these gaskets also resist salt water.
Furnished with plastic sleeves and washers to provide a layer of protection against dielectric corrosion, which occurs when different metals are joined.
Damp vibration when sealing in moist environments with this EPDM gasket material.
Stick these gaskets around door and vent cutouts or replace worn seals to maintain your enclosure's NEMA rating.
Made from PTFE with an EPDM core, these gaskets have added resiliency resulting in a longer product life.
When working with water and steam, these gaskets ensure a tight seal.
To prevent contamination in your line, these gaskets set off metal detectors if a piece as small as 1 mm wears off. They’re EPDM, so the tight seal they form in stainless steel quick-clamp tube fittings withstands moist environments.
These gaskets have a perforated plate to filter, separate, and strain liquids or dry materials in your line.
These gaskets meet Fed. Std. Class 10,000 and ISO Class 7 clean room requirements.
The built-in screen is made of corrosion-resistant 316 stainless steel and provides inline straining.
Form a tight seal on cam-and-groove hose connections without fear of contaminating your food processing line. The metal additive in these gaskets can be picked up by a metal detector, so you can find and remove them if they fall into your line.
Use these gaskets with polypropylene, nylon, and PVDF plastic cam-and-groove hose couplings.
Safe to use in drinking water systems, these washers meet strict NSF/ANSI 61 standards. All are made of EPDM rubber, so they won’t break down from exposure to water.
These gaskets provide a tight seal in steam applications.
Use cartridges with a standard caulk gun for quick and easy dispensing.
The thick consistency of these gasket makers creates a seal right away even before they harden. Press the nozzle to dispense a uniform bead.
Create a seal to get your machine back up and running in just two hours. These gasket makers have a thick consistency that creates a seal right away, even before they harden.
These gasket makers combine the ability to withstand temperatures up to 600° F with the flexibility to accommodate movement.
Dispense a uniform bead when you press the nozzle.
Create gaskets that can flex to accommodate movement and won’t degrade from oil.
These gasket makers combine oil resistance and the flexibility to accommodate movement.
Create a tight seal between the nozzle and lid of tank car manways.
These adhesives come in a can.
Made of EPDM foam rubber, these seals have hollow construction for more compressibility than solid seals.
These seals are made of solid EPDM foam rubber.
Hollow construction makes these seals more compressible than solid rubber seals. Made of EPDM rubber, they also resist salts.
These solid EPDM rubber seals also resist salts.
More compressible than seals with a solid bulb, these seals have a hollow bulb.
These seals have a solid bulb.
Quickly seal corners without needing to bend, cut, or piece straight seals together. All of these seals are made of EPDM foam to resist water, sunlight, and ozone.
These seals have an EPDM foam rubber bulb.
Made of EPDM foam, these seals resist water, sunlight, and ozone while also meeting transportation industry standards for flames, smoke, and toxicity.
Instead of cutting and adhering straight pieces together to cover a corner, these seals save you time and effort by coming already formed to 90°. All are made of EPDM foam to resist water, sunlight, and ozone.
The EPDM rubber wiper is firmer and more durable than the EPDM foam rubber wipers.
These seals have an EPDM foam rubber wiper, which is softer and more flexible than EPDM rubber wipers.
Push these T-seals into grooves and channels to block out moisture, dust, and debris.
Commonly used on vehicle windows, these seals have a flocked, velvet-like finish to reduce friction.
Made of EPDM foam or EPDM rubber, these seals stand up to water, sunlight, and ozone.
Made of EPDM rubber, these seals resist water, sunlight, and ozone.
Use these H-seals to lock out moisture, dust, and debris around windows and panels.
Seal stationary windows into place with these EPDM seals. EPDM resists water, sunlight, and ozone.
Softer and more flexible than EPDM rubber, these EPDM foam seals have a wiper that clears debris and a bulb that conforms to uneven surfaces to guard against dust, noise, and vibration.
With an accordion shape, these seals extend to cover large gaps, so they block debris and allow the two edges they connect to move.
Firmer and more durable than EPDM foam rubber seals, these seals are made of EPDM rubber. They also resist salts.
The foam core makes these vinyl rubber seals firmer and more durable than hollow seals. They also resist salts and detergents.
Softer and more flexible than EPDM rubber seals, these EPDM foam rubber seals will effortlessly conform to uneven surfaces.
These O-rings also resist ethanol and ethylene glycol.
These O-rings withstand higher temperatures than standard EPDM O-rings.
When you need an O-ring that’s not an industry standard size, we can make one to fit your requirements.
Made of FDA-listed material for use with food and beverage.
Also known as Boss O-rings, these O-rings are for use in tube fittings with a straight-thread connection.
Use these O-rings with metric sanitary fittings, which are also called aseptic fittings. Made of EPDM, they resist water, steam, ethanol, and ethylene glycol.
In addition to water and steam, this EPDM cord stock resists diluted salt solutions, ethanol, and isopropyl alcohol.
These assortments include a mix of EPDM O-rings that resist water and steam and silicone O-rings that resist temperatures up to 450° F.
In addition to water and steam, these EPDM O-Rings resist ethanol and ethylene glycol.
These kits include everything you need to make your own Buna-N, fluoroelastomer, or EPDM O-rings.
Also known as O-ring vulcanizing kits, these use a combination of heat and adhesive to create a bond that’s stronger with greater elasticity than a bond made of adhesive alone.
EPDM is blended with neoprene and SBR to create a general-purpose foam that offers good resistance to water and wear.
Made of EPDM foam, these sheets and strips have the best resistance to water, sunlight, and oxidation of all the foam we offer.
Made of EPDM, this foam has the best resistance to water, sunlight, and oxidation of all the foam we offer.
Neoprene is blended with EPDM and polyethylene for foam tubes that offer good resistance to water, sunlight, and oxidation.
These EPDM foam tubes have the best resistance to water, sunlight, and oxidation of all the foam tubes we offer.
Sunlight, ozone, and water won’t affect these sheets and strips.
Made from FDA-listed materials for use with food and beverage, these EPDM sheets and strips can be used in steamy environments.
With greater strength than standard Weather-Resistant EPDM, these sheets and strips provide better shock-absorbing qualities and longer life.
These EPDM sheets and strips meet transportation industry standards for flammability, smoke, and toxicity. Use them as weather-resistant seals on windows and doors, pads to reduce vibration between panels, and exterior trim.
For every 1/16" of thickness, there is one layer of super-strong fiberglass cloth that stands up to high stress and flex. Use these sheets and strips as flange gaskets and anywhere heavy compression would squeeze nonreinforced EPDM out of place.
Resistant to sunlight, ozone, and water, these 90° angles are good for sealing and cushioning corners.
Used to seal narrow spaces such as channels, these tubes offer more compression than solid EPDM rods.
Resistant to sunlight, ozone, and water, these rods are sized to seal narrow spaces such as channels.
Push these flexible grommets into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration.
Cut the thin layer of rubber in the center of these grommets to create custom IDs to securely hold and protect wire, cable, and cords. Push these grommets into place. They turn rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration. Also known as webbed grommets.
Keep grommets of various sizes on hand to solve whatever problems arise.
Made of rubber, this trim resists abrasion better than plastic trim. Often used on panels, boards, signs, and mirrors, it protects edges from impact.
A metal core adds strength and stability, making this trim more durable than standard rubber trim. Made of rubber, it resists abrasion better than plastic trim. Use it to protect the edges of panels, boards, signs, and mirrors from impact.
Guard the edges of panels, signs, glass, and other surfaces in food plants from frequent bumps and scrapes. This trim is FDA compliant, so it’s safe to directly touch food.
Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.
Close the gap between the bottom of an overhead door and the floor.
Seal the space between your double doors.
An extended spring on these seals accommodates variations in seal cavity length and pump misalignment.
Sunlight, ozone, and water won’t affect these washers.
Mount components to your enclosure without worrying about leaks.
Eliminate cavities under screw heads where contamination may occur.
The most conformable foam tape we offer, use this tape for mounting, gasketing, and damping sound and vibration. It has adhesive on both sides.
For applications requiring only part of the vacuum plate surface, use gasketing to seal off the in-use area. Cut to length.
Made from silicone, these sealants are RTV (room-temperature vulcanizing).
These sealants include a material certificate with traceable lot number, test report, and product shelf life.
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.
Compliant with ASTM E-595, these sealants produce almost no volatile materials in a vacuum.
Apply these sealants in cold temperatures, on wet surfaces, and even through running water.
Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.
A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.
Meeting requirements for semiconductor, biomedical, and electronics clean rooms, these sealants won’t contaminate air and surfaces.
These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.
Impervious to the swelling effects of oil, fuel, and solvents, use these high-strength sealants to assemble and repair fuel systems and tanks.
These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.
Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.
Prepare joints and surfaces to ensure proper sealant adhesion.
These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Fix roof leaks in cold and wet conditions. These sealants can even be applied underwater.
Form flexible water-resistant seals on metal, plastic, and rubber joints in heating, ventilation, air conditioning, and refrigeration applications.
Seal the glass on your level indicator.