Filter by
Consistency
For Use On
Color
For Use Outdoors
Formulation
Contains Aggregate
Container Size
Type
Temperature to Begin to Harden
Performance
Material
Reaches Full Strength
Mixing Required
Approximate Linear Coverage @ Thickness
Minimum Application Temperature
U.S.–Mexico–Canada Agreement (USMCA) Qualifying
REACH
DFARS Specialty Metals
RoHS
Export Control Classification Number (ECCN)
Deep-Crack Concrete Fillers
 |
Fill cracks up to 10" deep on vertical and overhead surfaces. To use this filler, secure the included injection ports to the crack with the two-part epoxy sealer, then spread sealer over the entire crack. Allow sealer 24 hours to cure. Application time for sealer, after mixing, is 40 minutes. To fill the rest of the void, use the cartridge with a standard caulk gun (sold separately) to dispense the two-part epoxy filler into the injection ports.
Sealant | Filler | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Container Type | Container Size, fl. oz. | Container Type | Begins to Harden, min. | Reaches Full Strength, hr. | Consistency | Mix Ratio | Color | For Max. Crack Wd. | Approx. Linear Coverage @ Thk. | Application Temp. Range, ° F | Process After Hardening | For Use On | Each | ||
| 34 | Jar | 10 | Cartridge | 15 | 24 | Thin Liquid | 1:1 | Light Amber | 1/4" | 8 ft. @ 10" | 50 to 90 | Sand, Tap | Concrete | 75095T11 | 0000000 | |
Self-Leveling Deep-Crack Concrete Fillers
 |
Fill cracks up to 4" deep on horizontal surfaces such as floors and sidewalks. These epoxies are shrink, impact, and chemical resistant, and can also be used on wood, fiberglass, and metal surfaces. Use the cartridges with a standard caulk gun (sold separately) for dispensing.
Container | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Temp. to Begin to Harden, ° F | Consistency | Mixing Req. | Mix Ratio | For Max. Crack Wd. | Contains Aggregate | Approx. Linear Coverage @ Thk. | Max. Thk. | For Use Outdoors | Application Temp. Range, ° F | Color | Process After Hardening | For Use On | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Epoxy Surface Fillers | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 10 | Cartridge | 15 | 24 | 77 | Thin Liquid | Yes | 1:1 | 1/16" | No | 24 ft. @ 4" | 4" | Yes | 50 to 90 | Light Amber | Sand, Tap | Concrete | 76005T84 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 10 | Cartridge | 15 | 24 | 77 | Thick Liquid | Yes | 1:1 | 1/4" | No | 6 ft. @ 4" | 4" | Yes | 50 to 90 | Light Amber | Sand, Tap | Concrete | 76005T85 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
