McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    14 Products

    Water-Resistant Surface Fillers

    Image of Product. Front orientation. Surface Fillers. Water-Resistant Surface Fillers, Epoxy, Can, Jar.
    Image of Product. Front orientation. Surface Fillers. Water-Resistant Surface Fillers, Epoxy, Tube.
    Image of Product. Front orientation. Surface Fillers. Water-Resistant Surface Fillers, Epoxy, Jar, Bottle.

    Epoxy

    Can, Jar

    Epoxy

    Tube

    Epoxy

    Jar, Bottle

    Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.
    Paste—Paste fillers resist alkalies, solvents, gasoline, and oil.
    Container
    Temp.
    Range
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    Approx. Coverage
    @ Thk.
    Max.
    Thk.
    For Use
    Outdoors
    Min.
    Max.,
    ° F
    Color
    Process After Hardening
    For Use On
    Each
    Epoxy Surface Fillers
    2Tube560 min.PasteYes1:112 in² @ 1/4"1/2"YesNot Rated200GrayMachine, Drill, Sand, Saw, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood0000000000000
    2Jar, Bottle2024 hr.PasteYes5:18 1/2 in² @ 1/4"1 1/2"YesNot Rated185WhiteMachine, Drill, Sand, Saw, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood000000000000
    2Jar, Bottle2024 hr.PasteYes5:18 1/2 in² @ 1/4"1 1/2"YesNot Rated250GrayMachine, Drill, Sand, Saw, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood000000000000
    14Can, Jar2024 hr.PasteYes5:162 in² @ 1/4"1 1/2"YesNot Rated185WhiteMachine, Drill, Sand, Saw, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood000000000000
    14Can, Jar2024 hr.PasteYes5:162 in² @ 1/4"1 1/2"YesNot Rated250GrayMachine, Drill, Sand, Saw, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood000000000000
     

    Epoxy Grout

    Image of Product. Front orientation. Surface Fillers. Epoxy Grout.
    Mix this two-part epoxy—a resin-aggregate blend and a pigmented hardener—to create a grout that resists chemicals, such as acids, alkalies, salt water, and common solvents and cleaners. Its lightweight formula makes this grout easy to spread. Use in horizontal or vertical joints—grout won’t sag or shrink. Apply with a grout float. It can be cleaned up with water when wet; it doesn’t require a sealer once it cures. The size listed is the combined total of the two parts.
    Container
    Net Wt.,
    lb.
    Type
    Begins to
    Harden, hr.
    Reaches Full
    Strength, day
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    For Max.
    Crack Wd.
    Approx. Coverage
    @ Thk.
    Max.
    Thk.
    For Use
    Outdoors
    Application
    Temp. Range, ° F
    Color
    For Use On
    Each
    Epoxy Surface Fillers
    1.3Pail73Thick LiquidYes1:11/2"95 ft² @ 1/4"1/2"Yes70 to 85BlackPlaster, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone000000000000000
    1.3Pail73Thick LiquidYes1:11/2"95 ft² @ 1/4"1/2"Yes70 to 85BrownPlaster, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone00000000000000
    1.3Pail73Thick LiquidYes1:11/2"95 ft² @ 1/4"1/2"Yes70 to 85WhitePlaster, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone00000000000000
     

    Concrete Surface Fillers

    Image of Product. Front orientation. Surface Fillers. Concrete Surface Fillers, Epoxy, Can.
    Image of Product. Front orientation. Can. Concrete Surface Fillers, 12 fl. oz. Container.

    Epoxy

    Can

    12 fl. oz. Container

    Fill in and shape horizontal, vertical, and overhead concrete surfaces, such as steps and columns.
    Epoxy—Epoxy surface fillers are nonsagging. They resist oil, grease, water, alkalies, and chemicals. Application time, after mixing, is 1 hour. The size listed is the combined total of the two parts.
    Container
    Size
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    Contains
    Aggregate
    Approx. Coverage
    @ Thk.
    Max.
    Thk.
    For Use
    Outdoors
    Application
    Temp. Range, ° F
    Color
    Process After
    Hardening
    For Use On
    Each
    Epoxy Surface Fillers
    12 fl. oz.Can606PasteYes1:1No1/2 ft² @ 1/4"1/4"Yes50 to 90GrayDrill, SandCeramic, Porcelain, Concrete, Masonry, Stone0000000000000
    2 qt.Can606PasteYes1:1No3 ft² @ 1/4"1/4"Yes50 to 90GrayDrill, SandCeramic, Porcelain, Concrete, Masonry, Stone000000000000
    2 qt.Can606PasteYes1:1No3 ft² @ 1/4"1/4"Yes50 to 90WhiteDrill, SandCeramic, Porcelain, Concrete, Masonry, Stone000000000000
    2 gal.Can606PasteYes1:1No12 ft² @ 1/4"1/4"Yes50 to 90GrayDrill, SandCeramic, Porcelain, Concrete, Masonry, Stone000000000000
     

    Fuel-Resistant Surface Fillers

    Image of Product. Front orientation. Surface Fillers. Fuel-Resistant Surface Fillers.
    Also known as sloshing compounds, these two-part epoxies bond to rough and rusty surfaces in fuel tanks to repair leaks and prevent further corrosion. They withstand permanent immersion in fuel, oil, and harsh solvents. Use them with metal, plastic, and fiberglass tanks. Mix the smaller can with the bigger one and pour into your fuel tank. Rotate the tank to coat the interior and dump out any excess. Allow to cure overnight. Size listed is the combined total of the two parts.
    1.5 pt. Container—1.5-pint container can treat a 10-gallon fuel tank.
    3 pt. Container—3-pint container can treat a 20-gallon fuel tank.
    Container
    Temp.
    Range, ° F
    Size,
    pt.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    For Use
    Outdoors
    Min.
    Max.
    Color
    Process After
    Hardening
    For Use On
    Each
    Epoxy Surface Fillers
    1.5Can524Thick LiquidYes2:1No7090AmberDrill, Sand, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, Galvanized Iron, Galvanized Steel, Silver, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Nylon, Polyethylene, Polypropylene, Polyimide, PVC, PVDF, Ceramic, Porcelain, Fiberglass0000000000000
    3Can524Thick LiquidYes2:1No7090AmberDrill, Sand, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, Galvanized Iron, Galvanized Steel, Silver, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Nylon, Polyethylene, Polypropylene, Polyimide, PVC, PVDF, Ceramic, Porcelain, Fiberglass0000000000000
     
    back to top