Filter by
Color
Container Type
Viscosity
Maximum Temperature
Manufacturer
Container Size
Peel Strength
Formulation
Mixing Required
Manufacturer Model Number
Begins to Harden
Cure Type
Adhesive Type
Elongation
Type
Consistency
Shear Strength
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
RoHS
Fitting Connection
Approximate Linear Coverage @ Bead Diameter
Mix Ratio
Toughened Epoxy Structural Adhesives
Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds. The most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
These have two parts that must be mixed. The size listed is the combined total of the two parts. Use with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
3M Scotch-Weld Adhesives
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| DP405 | 1.69 | Cartridge | 3 min. | 7 days | 2,260 | 40 | 2:1 | Thick Liquid (9,500 cP) | -65° to 350° | Black | Metal, Plastic, Rubber | 00000000 | 000000 |
Mixer Nozzles, Plungers, and Dispensing Guns