Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals.

These zinc-rich coatings offer the protection of hot-dip galvanizing to keep iron and steel free of rust and corrosion.

Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within.

Keep working when temperatures drop—these coatings can be applied in temperatures down to 20° F, when other coatings would fail. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.

Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.

Designed for use in areas with heavy vehicular traffic, these coatings are highly resistant to wear. They contain grit to provide traction to your surface.

Use these coatings in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry.

These coatings are more durable than our standard coatings for concrete floors. They provide a stain-resistant finish that protects your floors from moisture, chemicals, foot traffic, and hand carts.

High humidity, harsh chemicals, water submersions, and salt are no match for these electronic coatings.

Thinner than potting compounds, these rigid and wear-resistant coatings flow easily into small spaces between electrical components. Use them to secure and insulate hardware on printed circuit boards.

Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics.

Tough enough to be permanently submersed in seawater, these compounds protect sensitive electronics, such as circuit boards, semiconductors, and sensors in harsh environments.

Protect circuit boards and other electronics from fire and heat.

Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds.

Prepare metal surfaces for powder coating. These primers create a base layer that bonds with your top coat to extend the life of your powder coating.

A high concentration of zinc gives these primers excellent corrosion resistance for protecting steel—when exposed to moisture and chemicals, the zinc rusts before the underlying steel can. They’re often used with structural steel.

Use these primers on your surface before antislip coatings to maximize longevity.

These thin primers penetrate deeply into concrete floors to create a hard surface that can then be coated with any urethane or epoxy coating.

These tanks are built to ASME specifications. Use them with your paint sprayer for high-volume application of paint and coatings.

Tackle high-volume projects while achieving a fine finish. These sprayers can switch from siphon-feed to pressure-feed for thick paint.

Minimize waste of paint and coatings—these sprayers produce less overspray than our other air-powered sprayers.

Use this portable spray booth for small projects to contain overspray and discharge fumes as you paint.

Give thick coatings a smooth finish with these hard phenolic roller covers. Designed to apply anti-slip coatings to floors, they can also be used with epoxies and other thick protective coatings.

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.

Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.

Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds.

Bond most materials without the strong odor of other epoxy adhesives.

With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.

Bond new concrete to old concrete, or use this adhesive as a primer on concrete surfaces.

When concrete is saturated or submerged in water, use these adhesives to form strong bonds.

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.

Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.

These rubber-filled epoxies have excellent wear and impact resistance. Use them to repair and rebuild surfaces such as pump liners, hoppers, and vibrating feeders.

For use in processing equipment that carries large particles 1/16" in diameter and larger, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as pump housings, chute linings, and hoppers.

Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal.

To stop leaks in metal tanks and equipment without draining the contents, heat the area with a heat gun or torch to melt the stick and form a permanent seal. The resulting patch can withstand pressure up to 600 psi.

A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.

Fill cracks in horizontal, vertical, and overhead concrete surfaces.

Fill cracks up to 4" deep on horizontal surfaces, such as floors and sidewalks.

Patch concrete floors and stairs with these compounds.

These leveling compounds stand up to acid and chemical spills, making them a good choice for corrosive environments. They also withstand steel wheels and heavy impacts.

Not only do these leveling compounds withstand severe abrasion, wear, and impact, they also stand up to steel wheels and heavy blows without cracking.

Press these putty-like fillers into cracks in wood up to 1/8" wide.

Extend the life of your footwear with these abrasion- and water-resistant epoxies.