Filter by
For Use On
Container Type
Formulation
Ultimate Pull-Out Strength in 4,000 psi Concrete
Adhesive Type
Viscosity
Maximum Temperature
Consistency
Performance
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Cure Type
Manufacturer
Anchoring Adhesive Kits for Concrete
 |
Permanently set threaded rods, studs, and rebar in concrete with these kits. They include applicators and mixer nozzles to simultaneously mix and dispense the adhesive. These adhesives form a weather-resistant chemical bond that seals out moisture and resists vibration and dynamic loads better than mechanical anchors. Warning: Allowable pull-out strength is 25% of ultimate values or less, as required by building authorities.
Container Size, fl. oz. | Begins to Harden | Reaches Full Strength, hr. | No. of 1/2" Dia. Rods Set at 4 1/2" Installation Dp. | Ultimate Pull-Out Strength (in 4,000 psi Concrete) | Mix Ratio | Consistency | Temp. Range, ° F | Color | Each | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 8.6 | 20 min. @ 75° F | 24 | 12 in 5/8" Dia. Hole | 8,600 lbf—3/8" Diameter Threaded Rod × 3 1/2" Installation Depth 15,300 lbf—1/2" Diameter Threaded Rod × 4 1/2" Installation Depth 22,500 lbf—5/8" Diameter Threaded Rod × 5 5/8" Installation Depth 35,000 lbf—3/4" Diameter Threaded Rod × 6 3/4" Installation Depth 43,500 lbf—7/8" Diameter Threaded Rod × 7 7/8" Installation Depth 47,000 lbf—1" Diameter Threaded Rod × 9" Installation Depth 67,200 lbf—1 1/4" Diameter Threaded Rod × 11 1/4" Installation Depth | 1:1 | Paste | 40 to 110 | Gray | 92378A256 | 0000000 |
Epoxy Structural Adhesive Assortments
 |
Component Included | Each | ||
|---|---|---|---|
| General Purpose (Masonry, Metal, Plastic, Rubber) Nonsagging (Masonry, Metal, Wood) Slow-Set (Composite, Metal) Quick-Set (Masonry, Metal, Rubber) High Strength (Metal, Rubber) Waterproof (Composite, Masonry, Metal) Optically Clear (Glass, Metal) Machinable (Composite, Metal) | 7538A16 | 000000 |
Adhesive and Sealant Assortments
 |
Assorted adhesives and sealants for routine maintenance work or quick repairs.
Mfr. | Includes | Component (Mfr. Model No.) | Reaches Full Strength, hr. | Mixing Req. | Each | ||
|---|---|---|---|---|---|---|---|
| Loctite® | Case | Pipe Thread Sealant (567)—1.69 fl. oz. Bottle Threadlocker (243)—0.34 fl. oz. Bottle Threadlocker (263)—0.34 fl. oz. Bottle Retaining Compound (641)—0.34 fl. oz. Bottle Retaining Compound (660)—1.69 fl. oz. Tube Gasket Maker Sealant (587)—2.4 fl. oz. Tube Gasket Maker Sealant (518)—1.69 fl. oz. Tube Pipe Thread Sealant (5452)—1.69 fl. oz. Bottle | 24 | No | 7458A65 | 0000000 |
High-Temperature Surface Fillers for Metal
 |
Epoxy Syringe |
Repair and rebuild metal surfaces that are exposed to heat. These surface fillers withstand temperatures over 450° F. Fillers that have a mix ratio are multi-part fillers. The size listed is the combined total of the parts.
Syringe—Surface fillers in a syringe come with everything you need to make repairs.
Container | Temp. Range, ° F | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Consistency | Mixing Req. | Mix Ratio | Approx. Coverage @ Thk. | Max. Thk. | For Use Outdoors | Min. | Max. | Color | Process After Hardening | For Use On | Each | |||
Epoxy Surface Fillers | ||||||||||||||||||
| 1.5 | Syringe | 20 | 24 | Putty | Yes | 9.1:1 | 1 in² @ 1/4" | Not Rated | Yes | -40 | 500 | Gray | Machine, Drill, Saw | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Fiberglass | 75325A1 | 000000 | ||
Water-Resistant Surface Filler Kits
West System 105K
 |
Includes | Formulation | Consistency | For Use Outdoors | Temp. Range, ° F | Process After Hardening | For Use On | Each | ||
|---|---|---|---|---|---|---|---|---|---|
| 8 One-Time-Use Packets of 101-TS Two-Part Epoxy Filler 0.1-oz. 406 Collodial Silica Filler 0.1-oz. 410 Low-Density Filler Two Brushes Reusable Mixing Stick Three Mixing Cups 15" × 15" Fiberglass Cloth Syringe Dispenser Three Pairs of Disposable Gloves | Epoxy | Thin Liquid | Yes | 35 to 130 | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, ABS, PVC, Fiberglass, Wood | 7480A51 | 000000 |
Epoxy Structural Adhesives for Hard-to-Bond Materials
 |
Cartridge |
Join polyethylene, polypropylene, and other plastics standard epoxies can't adhere to. Epoxies are the strongest and most chemical-resistant adhesives. They bond especially well on metal.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Container | Strength | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Shear, psi | Peel | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | Includes | For Joining | Each | |||
| 1.69 | Cartridge | 30 | 24 | 360 | Not Rated | 2:1 | Thick Liquid | 9,500 | -50 to 350 | 1:1 and 2:1 Mix Ratio Plungers, Mixer Nozzle, One 2-oz. Bottle of Etching Solution | Plastic | 7607A15 | 0000000 | ||
| 1.69 | Cartridge | 30 | 24 | 360 | Not Rated | 2:1 | Thick Liquid | 9,500 | -50 to 350 | 1:1 and 2:1 Mix Ratio Plungers, Mixer Nozzle, Mixing Stick, Two 4-oz. Bottles of Etching Solution, Two Brushes, Two Mixing Trays | Plastic | 7807A11 | 000000 | ||
