We will reply to your message within an hour.
Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal.
Repair and rebuild metal surfaces that are exposed to heat. These surface fillers withstand temperatures over 450° F.
These rubber-filled epoxies have excellent wear and impact resistance. Use them to repair and rebuild surfaces such as pump liners, hoppers, and vibrating feeders.
For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.
For use in processing equipment that carries large particles 1/16" in diameter and larger, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as pump housings, chute linings, and hoppers.
Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces.
Stop leaks in metal tanks and equipment without draining the contents.
To stop leaks in metal tanks and equipment without draining the contents, heat the area with a heat gun or torch to melt the stick and form a permanent seal. The resulting patch can withstand pressure up to 600 psi.
Dispense ready-to-use conductive liquid to fill pits and small gaps on circuit board components.
A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.
Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
Make castings and fill voids with these two-part pourable epoxies.
Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.
Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.
Everything you need to repair cracked, worn, and damaged surfaces—even underwater.
Also known as sloshing compounds, these surface fillers bond to rough, rusty surfaces in fuel tanks to repair leaks and prevent further corrosion.
Press these putty-like fillers into cracks in wood up to 1/8" wide.
Fix damaged wood or build up and replace missing wood.
Use these two-part fillers to rebuild cracked or worn plastic surfaces.
Fill cracks in horizontal, vertical, and overhead concrete surfaces.
Fill cracks up to 10" deep on vertical and overhead surfaces.
Fill cracks up to 4" deep on horizontal surfaces, such as floors and sidewalks.
Fill in and shape horizontal, vertical, and overhead concrete surfaces, such as steps and columns.
Repair sidewalks and factory floors in areas with heavy pedestrian traffic. They can also be used to fill minor depressions and cracks.
Patch concrete floors, stairs, and walls with these compounds.
Cover large sections of damaged concrete with these durable patching compounds. Made up of a resin, hardener, and aggregate, they cover more area than any of our other concrete patching compounds.
These leveling compounds stand up to acid and chemical spills, making them a good choice for corrosive environments. They also withstand steel wheels and heavy impacts.
Not only do these leveling compounds withstand severe abrasion, wear, and impact, they also stand up to steel wheels and heavy blows without cracking.
Use these two-part compounds to patch concrete floors, stairs, and walls in cold environments, such as freezers. At room temperature, they cure faster than any of our other concrete patching compounds.
Mix this two-part epoxy—a resin-aggregate blend and a pigmented hardener—to create a grout that resists chemicals and doesn't require sealing. Use on ceramic, concrete, and stone floor and wall tiles.
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.
Even when used under water, these adhesives maintain their strength.
These machinable epoxies are mixed with steel, but won’t rust, so they can be used to repair cracks and threaded holes.
For quick repairs, these epoxies begin to harden in 6 minutes or less.
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.
Seal leaks on vacuum systems and components.
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.