These durable tables won't warp or splinter. Use them to elevate machinery and equipment up to 24" from the floor.

With an extra-smooth nonconductive surface, these tables won't trap dirt and oil, making them easy to clean. They are often used as printer stands.

With a flatness tolerance of 0.002" per foot, these 24" high tables provide an accurate reference surface for layout and inspection work. They have a thick steel frame and welded construction to support 35,000 lbs.

A lower shelf provides additional storage space. Often used in laboratories, these tables stand up to repeated washdowns and resist damage from grease and chemicals.

Without a shelf, these tables provide room to pull up a stool or chair. The durable steel top won't warp or splinter.

With an extra-smooth surface, these tables won't trap dirt and oil, making them easy to clean. They are also nonconductive.

Also known as balance tables, these marble tables provide superior vibration control for sensitive measuring equipment.

With a thick steel frame and welded construction, these tables have a capacity of at least 10,000 lbs.

These durable tables won't warp or splinter. They can be configured at a custom height.

With a thick steel frame and a capacity of at least 10,500 lbs., these welded tables are our strongest and most durable adjustable-height tables. They can be configured for either seated or standing tasks.

Fold these lightweight tables in half and use the handle to carry them with one hand.

Provide a convenient place outdoors to sit and eat.

The sloped top, drainage hole and plug, and drain pan contain spills when working with fluids.

Keyhole slots in the legs allow you to adjust the height of these workbenches in 1 1/2" increments.

These workbenches have plastic frames that won't rust or dent.

With thick steel and an all-welded construction, these legs support the highest capacities of all our workbench legs.

All legs have knockouts in the front and back to accept duplex electrical outlets.

Adjust the height of a workbench without clearing off the top or loosening leg bolts.

Use two legs to hold up to 4,000 lbs. Adjust height in 1 1/2" increments with rivets that slide into keyhole slots.

Use two legs for a capacity of 6,000 lbs. Remove and reposition the bolts to adjust height in 1" increments.

For added security, drawers are concealed behind padlockable doors.

At 24" wide, these compact workbenches provide storage and a work surface even when space is limited.

Tilt back these workbenches to roll them anywhere. Open the lid to use it as a work surface.

Often used in laboratories and food-processing plants, these workbenches resist corrosion.

These workbenches are dent and rust resistant.

Heavy duty construction adds strength for higher load capacities than other positioning arms.

Ball-and-socket connections allow 360° positioning.

Stronger and with greater load capacities than gooseneck-style positioning arms, these arms keep their shape even when moving or when exposed to vibration. They’re often used in robotics and conveyor applications when frequent repositioning isn’t required.

Bend these arms to hold small equipment such as lights and microphones in almost any position.

Position small panels and displays with these compact arms.

The head rotates 360° and tilts up and down.

Mount components of Ball-Grip Positioning Arms to the top of a positioning stand or tripod.

Bend and wrap the legs around almost anything while keeping a level mounting surface.

Attach a monitor to these stands, then route cords through the hollow mounting poles for a clean, organized appearance.

Suspend tools to keep them out of the way but still within reach.

Position parts exactly where they’re needed for workers, robots, and other machines to easily access them.

Mount to a machine table to rotate a vise 360° in 1° increments.

For use on your existing workbench, these tables hold your router in place, so you can make quick and accurate cuts by moving material across the table surface.

Place stands on a work surface to position pipe while machining.

Arms are long and at a wide angle to support pipe from 4" to 36" in diameter.

The hand crank on these tables has two speeds for fast and slow adjustment.

The top extends beyond the base for easier access to tight spaces and bench tops.

For easy access to material, the tabletop rotates 360° and locks in any position.

A battery-operated motor and a hydraulic pump do the work for you; they lift loads with the push of a button.

The tabletop can go as low as 3", making loading and unloading from the floor and pallets easier.

An electric motor and a hydraulic pump lift loads with the push of a button.

Choose your table based on capacity, then choose the type of control that best suit your application.

A hydraulic pump and an air-driven motor do the work for you.

After raising a load, add these steel stands for support.

No need to lift heavy reels—just roll them up the built-in ramp for easy loading.

Organize all your 3D printing tools and supplies in one mobile workstation.

Carts meet NSF/ANSI standards for use in food-service areas.

Also known as A/V and audio/visual carts, these carts come with an outlet strip and power cord.

With shelves on one side and a pegboard on the other, these carts keep tools easily accessible.

Store, organize, and transport spools of wire and small tools around your jobsite.

Not only are these carts corrosion resistant, they also meet NSF/ANSI standards so they're suitable for food processing applications.

Made of strong yet lightweight plastic, these carts have rounded corners to protect walls from damage and a storage compartment near the handle to contain small items.

Made of welded stainless steel, these carts combine corrosion resistance with the strength and durability of steel carts.

Wheel objects around your workspace on these carts, then fold the carts flat so they take up minimal space in storage.

Panels on three sides let you stack material high, while the top shelf can be used as a work surface.

Store, mix, and drain drums in a single location.

Clamp onto the rim of a container up to 15" in diameter.

Hang your human-machine interface and swivel it around to save floor space and comfortably access touch screens, buttons, and other operating equipment.

Attach and position phones, tablets, monitors, and computer accessories on T-slotted rails.

Stay organized with hooks, bin boxes, shelves, and tool holders that work with T-slotted framing.

Elevate robot arms with these bases so they can reach onto raised surfaces, such as conveyor belts or workstations.

Mix and match a variety of components to create a custom workstation for moving parts in and out of CNC machines or other similar applications.

Extend the horizontal reach of your Universal Robots’ arm to operate your robot at multiple positions along an assembly line, or transport workpieces from a conveyor to your CNC.

The tray and sponge are included for cleaning the tips.