Selecting and Measuring Expansion Joints
For information about selecting pipe size, see Selecting and Measuring Pipe & Fittings.
More
Expansion Joints with Flanged Ends
These joints reduce stress, vibration, and noise in piping systems by providing a point of flexibility to absorb movement. The flanged ends rotate for easy bolt hole alignment during installation. They mate with a same-size flat-surface Class 150 flange without the need for a gasket. Joints have a flexible body that is reinforced with nylon for added strength.
Position the expansion joints as close as possible to anchor points. Attach limit rod sets (sold separately) to the flanges to prevent overextension where anchoring is insufficient. To accommodate the thickness of the limit rod mounting plate, use bolts that are 7/8" longer than the bolts connecting the expansion joint to the pipe flange. Each set of limit rods requires eight bolts (not included).
- For Use With: Nonabrasive Slurry, Water
- Temperature Range: -10° to 220° F
- Maximum Pressure: 220 psi @ 72° F
- Maximum Vacuum: 26 in. of Hg @ 72° F
- For Use With: Alcohol, Water
- Temperature Range: -20° to 250° F
- Maximum Pressure: 220 psi @ 72° F
- Maximum Vacuum: 26 in. of Hg @ 72° F
High-Temperature All-Metal Expansion Joints with Flanged Ends
- For Use With: Air, Natural Gas, Oil, Steam, Water
- Temperature Range: -20° to 800° F
- Maximum Pressure: 150 psi @ 72° F
- Maximum Vacuum: 29 in. of Hg @ 72° F
These all-metal expansion joints can handle higher temperatures than rubber expansion joints. They reduce stress, vibration, and noise in piping systems by providing a point of flexibility to absorb movement. Joints are made of 304 stainless steel for very good corrosion resistance. The flanged ends rotate for easy bolt hole alignment during installation. Flanges mate with a same-size flat-surface Class 150 flange with a gasket (sold separately).
Liners (sold separately) slide into the expansion joint to provide a smooth interior for unrestricted flow.
Expansion Joints with Flanged Ends for High Vibration
These expansion joints have a double-bulb design for extra movement and vibration absorption. The flanged ends rotate for easy bolt hole alignment during installation. They mate with a same-size flat-surface Class 150 flange without the need for a gasket. Joints have a flexible body that is reinforced with nylon for added strength.
Attach limit rod sets (sold separately) to the flanges to prevent overextension where anchoring is insufficient. To accommodate the thickness of the limit rod mounting plate, use bolts that are 7/8" longer than the bolts connecting the expansion joint to the pipe flange. Each set of limit rods requires eight bolts (not included).
- For Use With: Grain Alcohol, Nonabrasive Slurry, Water
- Temperature Range: -10° to 220° F
- Maximum Pressure: 220 psi @ 72° F
- Maximum Vacuum: 26 in. of Hg @ 72° F
- For Use With: Alcohol, Water
- Temperature Range: -20° to 250° F
- Maximum Pressure: 220 psi @ 72° F
- Maximum Vacuum: 26 in. of Hg @ 72° F
Clamp-On Expansion Joints
- For Use With: Calcium Chloride, Oil, Petroleum, Sewage, Sludge, Sodium Carbonate (20% in Water), Water
- Temperature Range:
Neoprene Rubber: -20° to 220° F
Silicone Rubber: -75° to 500° F - Maximum Pressure: 150 psi @ 72° F
- Maximum Vacuum: 20 in. of Hg @ 72° F
Slip these joints over your pipe ends and tighten the band clamps for a secure hold. Joints have a triple-bulb design that provides excellent vibration absorption to reduce stress on your piping system. They also have reinforcing rings for extra support during pressure surges and in vacuum applications.
Neoprene rubber joints are more abrasion resistant than silicone rubber joints.
Distance | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Pipe OD  | Pipe Size | Lg. | Compression | Expansion | Offset | Expansion Joint Type | Reinforcement Material | Band Clamp Material | Each | |
Neoprene Rubber | ||||||||||
| 12 3/4" | 12 | 7" | 1" | 1/2" | 1 1/8" | Triple Bulb | Nylon Plastic | 300 Series Stainless Steel | 0000000 | 0000000 |
Silicone Rubber | ||||||||||
| 12 3/4" | 12 | 7" | 1" | 1/2" | 1 1/8" | Triple Bulb | Fiberglass | 300 Series Stainless Steel | 00000000 | 000000 |