Expansion Plugs with Bypass
Use the bypass tube on these plugs to add air, water, and other fluid to your pipeline or to relieve pressure while testing. The seal expands to temporarily close off pipe openings. Maximum air back pressure is the amount of pressure a plug can withstand without moving. Maximum water back pressure refers to the pressure resulting from the height of the water above the plug.
For Styles A-E and H-L, twist the wing nut to expand the seal.
Styles C and D have an NPT threaded bypass for making leak-tight connections.
For Pipe | Max. Back Pressure | Material | Bypass | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | ID | Air, psi | Water, ft. of head | O'all Ht. | Temp. Range, °F | Seal | Bypass Cap | Pipe Size | Thread Type | Gender | Each | |
Style C | ||||||||||||
Iron Stem | ||||||||||||
| 10 | 9.50"-10.00" | Not Rated | 4 | 14 7/8" | 30° to 150° | Natural Rubber | Metal | 1/2 | NPT | Male | 0000000 | 0000000 |
Air-Inflatable Plugs
Conform to wide and out-of-round pipes with these inflatable plugs. Also known as pneumatic plugs, they're designed for temporary seals since they can lose pressure over time. Inflate with a hand pump (sold separately); an air compressor may overinflate the plug and cause damage. Tether the plugs using either the eyebolt or chain/ring so they don't get lost or stuck in your pipes. Maximum air back pressure is the amount of pressure a plug can withstand without moving. Maximum water back pressure refers to the pressure resulting from the height of the water above the plug.
For Pipe | Deflated | Max. Back Pressure | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | ID | Dia. | Ht. | Air, psi | Water, ft. of head | Required Inflation Pressure, psi | Temp. Range, °F | Seal | Eyebolt | Each | |
| 10 | 9.00"-10.25" | 8 3/4" | 11 3/4" | 17 | 40 | 25 | -20° to 125° | Natural Rubber | Zinc-Plated Steel | 000000 | 0000000 |
Air-Inflatable Plugs with Bypass
Conform to wide and out-of-round pipes with these inflatable plugs. Also known as pneumatic plugs, they're designed for temporary seals since they can lose pressure over time. Use the bypass tube on these plugs to add air, water, and other fluid to your pipeline or to relieve pressure while testing.
Inflate with a hand pump (sold separately); an air compressor may overinflate the plug and cause damage. Tether the plugs using either the eyebolt or chain/ring so they don't get lost or stuck in your pipes during installation. Pull on the tether for quick and easy removal once testing is complete.
Maximum air back pressure is the amount of pressure a plug can withstand without moving.
Maximum water back pressure refers to the pressure resulting from the height of the water above the plug.
For Pipe | Deflated | Max. Back Pressure | Bypass | Material | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | ID | Dia. | Ht. | Air, psi | Water, ft. of head | Required Inflation Pressure, psi | Pipe Size | Thread Type | Gender | Temp. Range, °F | Seal | Eyebolt | Each | |
| 10 | 9.00"-10.25" | 8 3/4" | 11 3/4" | 13 | 30 | 35 | 3 | NPT | Female | -20° to 125° | Natural Rubber | Zinc-Plated Steel | 0000000 | 0000000 |