Built to handle tough, repetitive-use applications, these are more durable than standard straight-blade connectors.

Access the wire connection by opening the hinged housing. These connectors have screw terminals to create a secure connection; wire must be stripped before winding around the screw terminal.

Visually confirm that connectors have power; they have an indicating light that is visible from any angle.

Protect computers and other sensitive equipment from electromagnetic interference (EMI). Also known as isolated ground receptacles.

An indicating light that is visible from any angle lets you know when these plugs have power. They have an extra-tight fit when mated with a receptacle to withstand high vibration. Also known as hospital grade plugs.

Add a fuse to protect equipment from current overload. When mated with a receptacle, these plugs have an extra-tight fit to remain secure in high vibration environments. They're also known as hospital grade plugs.

A rubber housing protects these connectors from damage caused by drops and impact.

Stainless steel hardware and nickel-plated blades or slots protect connections from damage in corrosive environments.

Rated NEMA 6P and 13, IP66, and IP69K when mated, connectors withstand oil/coolant spraying, high-pressure, high-temperature washdowns, and are corrosion resistant so they can be used in marine environments.

Check the status of a ground connection—a green light signals that connectors have power and are safely grounded. They turn to lock together when mated to prevent accidental disconnection.

A good fit for tight spaces, these connectors are also known as NEMA midget plugs. They turn to lock together when mated to prevent accidental disconnection.

Rated NEMA 6P, NEMA 13, IP66, and IP69K when mated, these connectors withstand high-pressure, high-temperature washdowns, oil/coolant splashing, and are corrosion-resistant so they can be used in high-vibration marine environments.

When mated, these connectors meet NEMA 6P for protection against washdowns and temporary submersion.

Protect plugs and sockets in washdown environments when not in use.

Use these connectors in vehicles and other agricultural and construction equipment. They have a sealed nylon housing that resists dust and temporary submersion.

Each set includes one plug and one socket. These connectors withstand moisture, harsh engine fluids, and high temperatures. Also known as weather-pack connectors.

Deliver power to welding cable. These connectors withstand the high temperatures and high current found in welding applications.

These general purpose M23 connectors send power or signal to servomotors, servocontrollers, and servodrives.

Often used with thermosensors or brakes on large motors, these carry more than twice the current of standard latching connectors.

The smallest latching connectors we offer, these fit in tight spaces. The base and hood latch together securely, yet can be quickly detached for equipment repair or replacement.

A rubber seal and stainless steel hardware give these connectors excellent chemical resistance. They're rated NEMA 12, 4X, and IP65 for protection against corrosion, oil, and washdown environments.

Configure a connector for your application—combine inserts for power and signal with a base and a hood.

Quickly mate these connectors by pushing them together. They're often used with 12 mm proximity switches and valves in automated systems.

Also known as dummy plugs, these plugs close the electrical circuit on your mini connector, so you can safely change devices or repair connections.

Because they tightly thread to M12 connections, these connectors won’t let contaminants in or come loose from vibration in rugged industrial environments and automated systems as they send power and signal or just power to your equipment.

Safely use these connectors with 12 mm proximity switches, console lights, valves, and power supplies in food, beverage, and pharmaceutical applications—they’re FDA compliant for direct food contact.

Join two devices with M8 connectors to a single cord, distribution block, or I/O module with M12 connectors to save space and reduce the number of cords in industrial automation setups. Often used with sensors and switches, these splitters send or receive two signals through one connection.

Block signal interference from nearby devices, such as motors and transmitters, while maintaining a strong, stable connection for M12 threads.

Also known as pico connectors, these connectors are often used with 8 mm and smaller proximity switches and photoelectric switches.

Send higher current than M12 connectors to automated systems, motors, and pumps in environments where washdowns are common.

Send signal and power to low-current devices with M8 connections in food processing and other sanitary applications.

Visually check that your low-current devices with M8 connections are powered up and sending and receiving signals. These connectors illuminate green if they have power and yellow if they have signal.

Protect against signal interference while sending 2-3 times more current than M12 connectors.

Some of the smallest signal/power connectors we offer, these connectors fit in tight spaces and are often used in electronics.

Connect different pole configurations to join sensors, switches, and other devices to cords, distribution blocks, and I/O modules.

To save space and reduce the number of cords in industrial automation setups, these splitters join two devices with M12 connectors to a single cord, distribution block, or I/O module with M12 connectors.

Often used to send power and signal to automated systems, motors, and pumps, these mini connectors carry higher currents than M5, M8, and M12 connectors.

Connectors come assembled with wire leads already installed, so they can be quickly added to existing wiring systems. Use them with AMP MATE-N-LOK connectors.

Also known as power-pole connectors, these single-pole connectors join two pin connections, rather than a pin and socket. They stack from the top and sides to form any configuration.

Sets include a plug and socket with wire leads already installed, so they can be quickly added to existing wiring systems. They fit standard Molex plugs and sockets.

Often used in devices that branch off of the main power line, these connectors power high-amperage fans, pumps, and machines in motor controls, conveyors, and sorting and packaging systems.

Caps are watertight to protect hazardous location safe-break plugs when not in use.

When used together, connectors maintain a watertight and corrosion-resistant NEMA 4X connection.

These connectors meet international standards IEC 309-1 and 309-2. They prevent an electrical arc when separating mated connectors, so you can safely connect and disconnect with the power on.

These connectors have the same pin and socket configuration as connectors that meet MIL-DTL-26482, so they can be used with products that meet the same standard. Quickly mate them by pushing them together.

Use an Ethernet cable crimper to terminate these plugs.

Protect sensitive equipment from electromagnetic interference.

Add ix Industrial connections to printed circuit boards (PCBs).

Replace damaged connectors on lighting cables that are commonly used for movie and stage lighting, as well as interior building lighting.

Pull wires all the way through the connector face, and then use the crimper to cut and crimp wires in one step.

These sockets have a 110 punch-down connection; use a punch-down tool to terminate.

Often used to prototype or replace damaged connections, these connectors allow you to access and connect to individual USB pins.

Designed to withstand washdown and outdoor environments, these connectors have a seal to block out water and debris.

Assemble DB and HD connectors to replace worn out connectors.

Audio/video HDMI connectors and cords are rated IP67 when mated.

With a ferrite filter block surrounding their contacts, these connectors control and reduce the electromagnetic (EMI) and radio frequency (RFI) interference traveling through them.

Unlike traditional RJ45 connectors found in data centers, these connectors stand up to rugged industrial environments since they tightly thread to devices with M12 connections, sealing out contaminants and resisting shaking loose from vibration. Use them to transfer high-speed data between sensors, switches, computers, IO modules, programmable logic controllers (PLCs), and other equipment.

The insulation on these cords resists water, so they can be used outdoors.

The insulation resists water, oil, and chemicals, so these cords withstand dirty and greasy environments.

Run these cords through high-traffic areas that are dirty and greasy. They have a thick insulation that resists water, oil, and chemicals, and protects against abrasion.

Keep personnel safe from electric shock with these cords.

In addition to an outlet on the end, these cords have multiple inline outlets.

Designed for indoor use, these cords are often used to power appliances.

Also known as hospital-grade cords, these have extra-tight connections to prevent them from detaching. The connectors are marked with a green dot.

Cover mated connectors on extension cords to prevent disconnection.

These cords have an oil- and water-resistant insulation and impact-resistant connectors for protection in harsh environments.

Keep personnel safe from electric shock with these cords.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Attach these splitters to an extension cord to power multiple devices from one cord.

Save energy by automatically turning off unused outlets. The master outlet controls five outlets and shuts off power to the other outlets when a device plugged into the master is turned off.

Separately control each device plugged into these strips—each outlet has its own power switch.

Keep personnel safe from electric shock with ground fault protection.

With a rubber housing, these outlet strips withstand drops and other impact.

Connect multiple devices from a single outlet.

These curved outlet strips clamp onto a pole or table leg.

Mount these outlet strips to a desktop or workbench with the mounting hardware, or set them on a surface.

Mount these strips into standard 19" wide electronics racks and enclosures.