About Wire and Cable
More
Shielded Ethernet Cords
The shielding on these cords blocks signal interference from nearby equipment and devices. They send data between computers, printers, servers, and switches. For faster data transmission speeds, choose a cord with a higher ethernet cable category. They’re backward compatible, so they work in networks that meet the same or a lower category.
Cords with braid and foil shielding have better protection than cords with only foil shielding, which is especially important for higher transmission speeds or longer lengths of cord. However, the added shielding increases cord diameter and reduces flexibility.
For technical drawings and 3-D models, click on a part number.
| Lg., ft. | Transmission Frequency | Wire Gauge  | Cord OD | Temperature Range, °F | Color | Each | |
Ethernet Cable Category 5E with Braid and Foil Shielding | |||||||
|---|---|---|---|---|---|---|---|
| 150 | 100 MHz | 26 | 0.24" | 0° to 140° | Black | 00000000 | 0000000 |
Continuous-Flex Ethernet Cable
- Use For: Automation, Continuous Motion, Data, Interference Shielding
- Continuous Flex
- Outer Insulation: TPE Rubber, except Category 6A is Polyurethane Plastic
Inner Insulation: TPE Rubber, except Category 6A is Polyolefin Plastic
Often used in automated applications that require continuous motion such as robotics, this cable sends data between computers, servers, and switches without degrading data transmission. This Ethernet cable is backward compatible so it works in networks that meet the same or a lower category. It is double shielded, which means it has a layer of braid and foil shielding for better protection against signal interference than braid alone. Use it in environments with high signal distortion, such as near transformers, generators, and heavy duty motors. Bend radius is the point to which the cable will bend without being damaged. It is measured from the center of the bend to the edge of the cable. The smaller the measurement, the tighter the bend.
Flame rated cable meets requirements for preventing the spread of flames based on a timed test. FT1 cable is suspended vertically during testing. FT2 cable is suspended horizontally during testing.
Per Ft. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ethernet Cable Category | Transmission Frequency | Wire Ga. | No. of Wires | Cable AWG | Temp. Range, °F | OD | Bend Radius | Outer Insulation Color | Inner Insulation Color | Specifications Met | Length, ft. | 1-99 | 100-Up | |
Double-Shielded Stranded Wire | ||||||||||||||
| 5 | 100 MHz | 24 | 4 | 24/4 | -30° to 155° | 0.28" | 2.8" | Purple | Brown, Green, White, Yellow | UL Recognized Component, C-UL Recognized Component, Flame Rated FT1 | 150 | 0000000 | 00000 | 00000 |
| 5E | 100 MHz | 26 | 8 | 26/8 | -30° to 155° | 0.33" | 3.3" | Purple | Blue, Blue/White, Brown, Brown/White, Green, Green/White, Orange, Orange/White | UL Recognized Component, C-UL Recognized Component, Flame Rated FT1 | 150 | 0000000 | 0000 | 0000 |
| 6 | 250 MHz | 26 | 8 | 26/8 | -30° to 155° | 0.33" | 3.3" | Purple | Blue, Blue/White, Brown, Brown/White, Green, Green/White, Orange, Orange/White | UL Recognized Component, C-UL Recognized Component, Flame Rated FT1 | 150 | 0000000 | 00000 | 00000 |
| 6A | 500 MHz | 26 | 8 | 26/8 | -40° to 155° | 0.28" | 4.2" | Green | Blue, Blue/White, Brown, Brown/White, Green, Green/White, Orange, Orange/White | UL Recognized Component, C-UL Recognized Component, CSA Certified, Flame Rated FT2 | 000000 | 00000 | 0000 | |