The insulation on these cords resists water, so they can be used outdoors.

Run these cords through high-traffic areas that are dirty and greasy. They have a thick insulation that resists water, oil, and chemicals, and protects against abrasion.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Power multiple devices with one extension cord.

Insulated to resist water, oil, and solvents, these cords withstand dirty and greasy environments.

In addition to an outlet on the end, these cords have multiple inline outlets.

These self-coiling cords return to their retracted length after stretching for tangle-free storage.

Also known as hospital-grade cords, these have extra-tight connections to prevent them from detaching. The connectors are marked with a green dot.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Keep personnel safe from electric shock with these cords.

Attach these splitters to an extension cord to power multiple devices from one cord.

Plug these cords into a vehicle outlet to power a device from the vehicle's battery.

These self-coiling cords stretch to full length and then return to their retracted length for tangle-free storage.

All cords have a country-specific plug to power equipment from international outlets.

Use these cords with computers, lab equipment, and office machines that have IEC connections.

All cords have a country-specific plug on one end and an IEC socket on the other end.

Create a vibration-resistant connection—the socket on these cords locks onto any male receptacle and will not detach until manually unlocked.

The shielding blocks signal interference from nearby equipment and devices.

These cords work with any Milwaukee tool with a pin socket (Quik-Lok) connection.

Plug these cords into computers, lab equipment, and office machines that have IEC connections.

FDA compliant for direct contact with food, these cords are safe to use with 12 mm proximity switches, valves, and power supplies in food, beverage, and pharmaceutical applications.

TPE insulation protects these cords from some of the toughest industrial conditions, including abrasion, coolants, chemicals, UV rays, and weld slag. Use them in areas with welding, machining, and fluctuating temperatures to send signal and power to M12 proximity switches, valves, and other devices.

These cords have a Nano M8 connector (also known as a pico connector) on one end and an USB Type-A connector on the other.

Often used for automated systems, motors, and pumps in tough industrial areas such as near welding and metal machining, these cords carry higher current than M5, M8, and M12 cords.

Connect two devices to a distribution block or I/O module with just one cord. Often used with sensors and actuators, these splitters send power/signals to your devices through a single connection.

These cords have an M8 connector on one end and an M12 connector on the other.

Send DC power to multiple electronics from one source. With industry standard barrel-style connections, these splitters are compatible with many power supplies and other devices.

Compatible with Molex connectors, these cords are sized to fit in tight spaces. They're often used in the interior of machines.

Use these cords with hydraulic and air-powered valves, motors, pumps, and pressure switches. They have a solenoid valve socket on one end and an M12 threaded plug on the other.

Use these cords in vehicles and other agricultural and construction equipment.

Often used in offices and workstations, these outlet strips power multiple devices from a single wall outlet.

Separately control each device plugged into these strips—each outlet has its own power switch.

An isolated ground connection on these outlets protects computers and other sensitive equipment from external signals that interfere with the equipment’s performance.

Also known as hospital-grade outlet strips, these outlets have an extra-tight fit to prevent plugs from detaching. They are marked with a green dot.

With a rubber housing, these outlet strips withstand drops and other impact.

Turn a single outlet into five outlets with ground fault protection to minimize the risk of electric shock.

Mount these outlet strips to a desktop or workbench with the mounting hardware, or set them on a surface.

Mount these strips into standard 19" wide electronics racks and enclosures.

A ratchet holds the extension cord on these reels in place at any length; a quick pull releases the cord and the spring-driven winding mechanism retracts it.

Controlled winding prevents the cord from whipping at the end, making winding safer and extending the life of the cord and reel.

Connect the wires in your power cord to these reels for a permanent and protected connection—the screw terminals are in a gasketed dust- and water-resistant NEMA 4 enclosure.

A steel stand makes these reels more rugged than light duty cord reels.

Attach the wires in a power cord to these reels for a permanent connection.

Use these unshielded cords where signal interference is not a concern.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission. They have an RJ45 plug on each end.

Use these unshielded cords where signal interference is not a concern.

To send high-speed data in tough, rugged environments, these cords have an M12 connector on one end that threads onto switches, sensors, and other devices prone to vibration. The other end has a traditional RJ45 plug that connects to Ethernet equipment, such as computers, IO modules, and programmable logic controllers (PLCs).

Send high-speed data between sensors, switches, or I/O modules with an M8 connection and programmable logic controllers (PLCs) and computers with a traditional RJ45 connection.

Unlike the RJ45 ends on traditional Ethernet cords, the threaded M8 ends on these cords keep contaminants out and resist coming loose from vibration.

Power up mobile devices and other electronics.

Adapt your USB port to connect to a variety of other devices.

Rated IP67, these cords withstand wet and dusty locations, such as enclosures on CNC machines.

No drilling or fasteners needed—a screw-in cover plate makes it easy to mount these chargers for powering up phones, tablets, speakers, cameras, and other small devices.

Often used in robotics, packaging, conveyors, and other applications with constant movement and high temperatures, these silicone rubber cords bend and flex at temperatures up to 325° F.

Pinch the sides on the plugs of these cords to insert them; they lock into a socket to prevent the cord from detaching.

Stretch these cords out when you need extra length and their coiled design springs back when it’s not needed to make them smaller.

Replace the cords connecting your robot controller and teach pendant when they become worn, or switch them out for a different length.

Display video from one source on two different monitors.

Transmit audio, video, and data signals over long distances with minimal signal loss.

Send high-definition signals to monitors, TVs, and projectors.

Play audio from one source on two different speakers.

Commonly used for movie, stage, and interior building lighting, these cords connect to equipment with five-pin XLR connections.

Connect computers, servers, and switches in a fiber-optic network.

Add grounding or surge suppression protection.

Use foreign devices in American outlets and American devices in foreign outlets.

Built to handle tough, repetitive-use applications, these are more durable than standard straight-blade connectors.

A good fit for tight spaces, these are smaller than standard straight-blade plugs. Also known as NEMA midget plugs.

Eliminate the need for wire stripping; snap-on terminals pierce the wire insulation and grip the wire securely. Access the wire connection by opening the hinged housing.

Visually confirm that connectors have power; they have an indicating light that is visible from any angle.

Add a fuse to protect equipment from current overload.

A rubber housing protects these connectors from damage caused by drops and impact.

An indicating light that is visible from any angle lets you know when these plugs have power. They have an extra-tight fit when mated with a receptacle to withstand high vibration. Also known as hospital grade plugs.

Also known as hospital-grade connectors, these have an extra-tight fit when mated to remain secure in high-vibration environments.

Rated NEMA 6P and 13, IP66, and IP69K when mated, connectors withstand oil/coolant spraying, high-pressure, high-temperature washdowns, and are corrosion resistant so they can be used in marine environments.

Use these general purpose connectors indoors in high vibration applications. A quarter turn locks them together when mated to remain secure in high-vibration applications.

Check the status of a ground connection—a green light signals that connectors have power and are safely grounded. They turn to lock together when mated to prevent accidental disconnection.

When mated, these connectors meet NEMA 6P for protection against washdowns and temporary submersion.

A rubber housing protects these connectors from damage caused by drops and impact. They turn to lock together when mated to prevent accidental disconnection.

Rated NEMA 6P, NEMA 13, IP66, and IP69K when mated, these connectors withstand high-pressure, high-temperature washdowns, oil/coolant splashing, and are corrosion-resistant so they can be used in high-vibration marine environments.

Often used to send power and signal to automated systems, motors, and pumps, these mini connectors carry higher currents than M5, M8, and M12 connectors.