About Hex Head Screws and Bolts
More
Extension Spring Stud Anchors
A black-oxide finish provides these steel anchors with mild corrosion resistance. Attach an extension spring to a stud and then thread the stud into your part for a secure connection.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||
|---|---|---|---|---|---|---|---|
Size | Min. Lg. | Lg. | Dia. | Hole Dia. | Material | Each | |
| 6-32 | 3/8" | 5/8" | 0.138" | 0.08" | Black-Oxide Steel | 0000000 | 00000 |
| 6-40 | 5/8" | 5/8" | 0.138" | 0.08" | Black-Oxide Steel | 0000000 | 0000 |
| 8-32 | 5/8" | 7/8" | 0.164" | 0.1" | Black-Oxide Steel | 0000000 | 0000 |
| 8-36 | 5/8" | 7/8" | 0.164" | 0.1" | Black-Oxide Steel | 0000000 | 0000 |
| 10-24 | 3/4" | 1 1/8" | 0.19" | 0.12" | Black-Oxide Steel | 0000000 | 0000 |
| 10-32 | 3/4" | 1 1/8" | 0.19" | 0.12" | Black-Oxide Steel | 0000000 | 0000 |
| 1/4"-20 | 7/8" | 1 1/4" | 1/4" | 0.15" | Black-Oxide Steel | 0000000 | 0000 |
| 1/4"-20 | 7/8" | 1 1/4" | 1/4" | 0.268" | Black-Oxide Steel | 0000000 | 0000 |
| 1/4"-28 | 7/8" | 1 1/4" | 1/4" | 0.15" | Black-Oxide Steel | 0000000 | 0000 |
| 3/8"-16 | 1 1/8" | 1 5/8" | 3/8" | 0.22" | Black-Oxide Steel | 0000000 | 0000 |
| 3/8"-16 | 1 1/8" | 1 5/8" | 3/8" | 0.268" | Black-Oxide Steel | 0000000 | 0000 |
| 3/8"-24 | 1 1/8" | 1 5/8" | 3/8" | 0.22" | Black-Oxide Steel | 0000000 | 0000 |
Thread | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Min. Lg., mm | Lg., mm | Dia., mm | Hole Dia., mm | Material | Each | |
| M3.5 | 0.6 | 10 | 16 | 3.5 | 2 | Black-Oxide Steel | 0000000 | 00000 |
| M4 | 0.7 | 16 | 22 | 4 | 2.5 | Black-Oxide Steel | 0000000 | 0000 |
| M5 | 0.8 | 19 | 28 | 5 | 3 | Black-Oxide Steel | 0000000 | 0000 |
| M6 | 1 | 22 | 32 | 6 | 4 | Black-Oxide Steel | 0000000 | 0000 |
| M8 | 1.25 | 25 | 38 | 8 | 5 | Black-Oxide Steel | 0000000 | 0000 |
| M10 | 1.5 | 28 | 41 | 10 | 6 | Black-Oxide Steel | 0000000 | 0000 |
Corrosion-Resistant Extension Spring Stud Anchors
These stainless steel anchor studs offer excellent corrosion resistance. Attach an extension spring to a stud and then thread the stud into your part for a secure connection.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||
|---|---|---|---|---|---|---|---|
| Size | Min. Lg. | Lg. | Dia. | Hole Dia. | Material | Each | |
| 6-32 | 3/8" | 5/8" | 0.138" | 0.08" | 18-8 Stainless Steel | 000000000 | 00000 |
| 6-40 | 5/8" | 5/8" | 0.138" | 0.08" | 18-8 Stainless Steel | 000000000 | 0000 |
| 8-32 | 5/8" | 7/8" | 0.164" | 0.1" | 18-8 Stainless Steel | 000000000 | 0000 |
| 8-36 | 5/8" | 7/8" | 0.164" | 0.1" | 18-8 Stainless Steel | 000000000 | 0000 |
| 10-24 | 3/4" | 1 1/8" | 0.19" | 0.12" | 18-8 Stainless Steel | 000000000 | 0000 |
| 10-32 | 3/4" | 1 1/8" | 0.19" | 0.12" | 18-8 Stainless Steel | 000000000 | 00000 |
| 1/4"-20 | 7/8" | 1 1/4" | 1/4" | 0.15" | 18-8 Stainless Steel | 000000000 | 0000 |
| 1/4"-20 | 7/8" | 1 1/4" | 1/4" | 0.268" | 18-8 Stainless Steel | 000000000 | 00000 |
| 1/4"-28 | 7/8" | 1 1/4" | 1/4" | 0.15" | 18-8 Stainless Steel | 000000000 | 0000 |
| 3/8"-16 | 1 1/8" | 1 5/8" | 3/8" | 0.22" | 18-8 Stainless Steel | 000000000 | 00000 |
| 3/8"-16 | 1 1/8" | 1 5/8" | 3/8" | 0.268" | 18-8 Stainless Steel | 000000000 | 00000 |
| 3/8"-24 | 1 1/8" | 1 5/8" | 3/8" | 0.22" | 18-8 Stainless Steel | 000000000 | 00000 |
Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Min. Lg., mm | Lg., mm | Dia., mm | Hole Dia., mm | Material | Anchor Type | Each | |
| M3.5 | 0.6 | 10 | 16 | 3.5 | 2 | 18-8 Stainless Steel | Stud | 000000000 | 000000 |
| M4 | 0.7 | 16 | 22 | 4 | 2.5 | 18-8 Stainless Steel | Stud | 000000000 | 00000 |
| M5 | 0.8 | 19 | 28 | 5 | 3 | 18-8 Stainless Steel | Stud | 000000000 | 00000 |
| M6 | 1 | 22 | 32 | 6 | 4 | 18-8 Stainless Steel | Stud | 000000000 | 00000 |
| M8 | 1.25 | 25 | 38 | 8 | 5 | 18-8 Stainless Steel | Stud | 000000000 | 00000 |
| M10 | 1.5 | 28 | 41 | 10 | 6 | 18-8 Stainless Steel | Stud | 000000000 | 00000 |
Corrosion-Resistant Swiveling Extension Spring Stud Anchors
These stainless steel anchor studs offer excellent corrosion resistance. The head swivels 360° so the spring stays straight and properly coiled. Attach an extension spring to a stud and then thread the stud into your part for a secure connection. To make tightening easier, anchors have a hex socket on the bottom and wrench flats at the top of the threads.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Min. Lg. | Lg. | Dia. | Hole Dia. | Hex Size | Material | Each | |
| 6-32 | 3/8" | 5/8" | 0.138" | 0.08" | 0.035" | 18-8 Stainless Steel | 000000000 | 000000 |
| 6-40 | 5/8" | 5/8" | 1/8" | 0.08" | 0.035" | 18-8 Stainless Steel | 000000000 | 00000 |
| 8-32 | 5/8" | 7/8" | 0.164" | 0.1" | 0.05" | 18-8 Stainless Steel | 000000000 | 00000 |
| 10-24 | 3/4" | 1 1/8" | 1/4" | 0.12" | 0.05" | 18-8 Stainless Steel | 000000000 | 00000 |
| 10-32 | 3/4" | 1 1/8" | 1/4" | 0.12" | 1/16" | 18-8 Stainless Steel | 000000000 | 00000 |
| 1/4"-20 | 7/8" | 1 1/4" | 1/4" | 0.15" | 5/64" | 18-8 Stainless Steel | 000000000 | 00000 |
| 1/4"-28 | 7/8" | 1 1/4" | 1/4" | 0.15" | 5/64" | 18-8 Stainless Steel | 000000000 | 00000 |
| 3/8"-16 | 1 1/8" | 1 5/8" | 3/8" | 0.22" | 1/8" | 18-8 Stainless Steel | 000000000 | 00000 |
| 3/8"-24 | 1 1/8" | 1 5/8" | 3/8" | 0.22" | 1/8" | 18-8 Stainless Steel | 000000000 | 00000 |
Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Min. Lg., mm | Lg., mm | Dia., mm | Hole Dia., mm | Hex Size, mm | Material | Each | |
| M3.5 | 0.6 | 10 | 16 | 3.5 | 2 | 0.9 | 18-8 Stainless Steel | 000000000 | 000000 |
| M4 | 0.7 | 16 | 22 | 4 | 2.5 | 1.3 | 18-8 Stainless Steel | 000000000 | 00000 |
| M5 | 0.8 | 19 | 28 | 5 | 3 | 1.5 | 18-8 Stainless Steel | 000000000 | 00000 |
| M6 | 1 | 22 | 32 | 6 | 4 | 2 | 18-8 Stainless Steel | 000000000 | 00000 |
| M8 | 1.25 | 25 | 38 | 8 | 5 | 2.5 | 18-8 Stainless Steel | 000000000 | 00000 |
| M10 | 1.5 | 28 | 41 | 10 | 6 | 3 | 18-8 Stainless Steel | 000000000 | 00000 |
Swiveling Extension Spring Stud Anchors
A black-oxide finish provides these steel anchors with mild corrosion resistance. The head swivels 360° so the spring stays straight and properly coiled. Attach an extension spring to a stud and then thread the stud into your part for a secure connection. To make tightening easier, anchors have a hex socket on the bottom and wrench flats at the top of the threads.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Min. Lg. | Lg. | Dia. | Hole Dia. | Hex Size | Material | Each | |
| 6-32 | 3/8" | 5/8" | 0.138" | 0.08" | 0.035" | Black-Oxide Steel | 000000000 | 00000 |
| 8-32 | 5/8" | 7/8" | 0.164" | 0.1" | 0.05" | Black-Oxide Steel | 000000000 | 00000 |
| 10-24 | 3/4" | 1 1/8" | 1/4" | 0.12" | 0.05" | Black-Oxide Steel | 000000000 | 00000 |
| 10-32 | 3/4" | 1 1/8" | 1/4" | 0.12" | 1/16" | Black-Oxide Steel | 000000000 | 00000 |
| 1/4"-20 | 7/8" | 1 1/4" | 1/4" | 0.15" | 5/64" | Black-Oxide Steel | 000000000 | 00000 |
| 1/4"-28 | 7/8" | 1 1/4" | 1/4" | 0.15" | 5/64" | Black-Oxide Steel | 000000000 | 00000 |
| 3/8"-16 | 1 1/8" | 1 5/8" | 3/8" | 0.22" | 1/8" | Black-Oxide Steel | 000000000 | 00000 |
| 3/8"-24 | 1 1/8" | 1 5/8" | 3/8" | 0.22" | 1/8" | Black-Oxide Steel | 000000000 | 00000 |
Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Min. Lg., mm | Lg., mm | Dia., mm | Hole Dia., mm | Hex Size, mm | Material | Each | |
| M3.5 | 0.6 | 10 | 16 | 3.5 | 2 | 0.9 | Black-Oxide Steel | 000000000 | 000000 |
| M4 | 0.7 | 16 | 22 | 4 | 2.5 | 1.3 | Black-Oxide Steel | 000000000 | 00000 |
| M5 | 0.8 | 19 | 28 | 5 | 3 | 1.5 | Black-Oxide Steel | 000000000 | 00000 |
| M6 | 1 | 22 | 32 | 6 | 4 | 2 | Black-Oxide Steel | 000000000 | 00000 |
| M8 | 1.25 | 25 | 38 | 8 | 5 | 2.5 | Black-Oxide Steel | 000000000 | 00000 |
| M10 | 1.5 | 28 | 41 | 10 | 6 | 3 | Black-Oxide Steel | 000000000 | 00000 |
Toggle Bolt-Style Hangers with Spring
These hangers are a popular choice for overhead applications. The spring holds the washer and toggle against opposite sides of the wall, so everything's in position before you begin tightening. To install, insert the bolt through your fixture and thread the toggle onto it. Next, fold the toggle wings flush against the bolt and push them through a drilled hole until they pop open on the other side. Once tightened, the spring adds vibration resistance. Zinc yellow-chromate plating provides corrosion resistance in wet environments. Dimensions meet ASME B18.6.3 specifications.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Lg. | Threading | Thread Spacing | Max. Usable Lg. | For Hole Dia. | Eye Dia. | Wd. | Thick. | Ht. | For Use In | Specifications Met | Includes | Pkg. Qty. | Pkg. | |
Zinc Yellow-Chromate Plated Steel | |||||||||||||||
| 1/4"-20 | 5" | Partially Threaded | Coarse | 2 1/4" | 3/4" | 1/4" | 3/8" | 3/32" | 15/16" | Drywall | ASME B18.6.3 | Spring, Toggle, Washer | 5 | 000000000 | 000000 |
Toggle Bolt-Style Hangers
These hangers are a popular choice for overhead applications. To install, insert the bolt through your fixture and thread the toggle onto it. Next, fold the toggle wings flush against the bolt and push them through a drilled hole until they pop open on the other side. Pull back on the bolt and tighten. They’re zinc plated for corrosion resistance in wet environments. Dimensions meet ASME B18.6.3 specifications.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Lg. | Threading | Thread Spacing | Max. Usable Lg. | For Hole Dia. | Eye Dia. | Wd. | Thick. | Ht. | For Use In | Specifications Met | Includes | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||||||||
| 1/4"-20 | 4" | Partially Threaded | Coarse | 1 5/8" | 5/8" | 7/32" | 3/8" | 3/32" | 11/16" | Drywall, Plaster | ASME B18.6.3 | Nut, Toggle, Washer | 5 | 000000000 | 00000 |
| 1/4"-20 | 5" | Partially Threaded | Coarse | 2 1/2" | 5/8" | 7/32" | 3/8" | 3/32" | 11/16" | Drywall, Plaster | ASME B18.6.3 | Nut, Toggle, Washer | 5 | 000000000 | 00000 |
Rounded Head Toggle Bolts
A spring-loaded toggle holds against the back of the material. To install, insert the bolt through your fixture and thread the toggle onto it. Next, fold the toggle wings flush against the bolt and push them through a drilled hole until they pop open on the other side. Pull back on the bolt and tighten. In denser materials such as high-strength concrete, use a drill bit that is 1/16" larger than the size listed.
Bolts are zinc-plated steel to resist corrosion in wet environments. The bolt is reusable, but the toggle will fall behind the wall when the bolt is removed. Extra toggles are sold separately.
For technical drawings and 3-D models, click on a part number.
Toggle Bolts | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread | Strength, lbs. | Head | Extra Toggles | |||||||||||||||
| Lg. | Usable Lg. | Size | Lg. | Wing Span | Drill Bit Size | Pull-Out | Shear | Tested In | Dia. | Ht. | Drive Style | For Use In | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||
Zinc-Plated Steel | ||||||||||||||||||
1/8" Dia. | ||||||||||||||||||
| 2" | 1 1/8" | 6-32 | 1 7/8" | 1 1/2" | 3/8" | 35 | 30 | 1/2" Drywall | 0.24" | 0.15" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 50 | 000000000 | 00000 | __ | 000000 | 00 |
| 3" | 2 1/8" | 6-32 | 2 7/8" | 1 1/2" | 3/8" | 35 | 30 | 1/2" Drywall | 0.24" | 0.15" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 50 | 000000000 | 0000 | __ | 000000 | 00 |
| 4" | 3 1/8" | 6-32 | 3 7/8" | 1 1/2" | 3/8" | 35 | 30 | 1/2" Drywall | 0.24" | 0.15" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 50 | 000000000 | 00000 | __ | 000000 | 00 |
3/16" Dia. | ||||||||||||||||||
| 2" | 7/8" | 10-24 | 1 7/8" | 2 1/8" | 1/2" | 45 | 45 | 1/2" Drywall | 0.33" | 0.13" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 50 | 000000000 | 00000 | 50 | 000000000 | 000000 |
| 3" | 1 7/8" | 10-24 | 2 7/8" | 2 1/8" | 1/2" | 45 | 45 | 1/2" Drywall | 0.33" | 0.13" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 50 | 000000000 | 00000 | 50 | 000000000 | 00000 |
| 4" | 2 7/8" | 10-24 | 3 7/8" | 2 1/8" | 1/2" | 45 | 45 | 1/2" Drywall | 0.33" | 0.13" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 50 | 000000000 | 00000 | 50 | 000000000 | 00000 |
| 6" | 5" | 10-24 | 6" | 2" | 1/2" | 45 | 45 | 1/2" Drywall | 0.365" | 0.13" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 50 | 000000000 | 00000 | 50 | 000000000 | 00000 |
1/4" Dia. | ||||||||||||||||||
| 3" | 1 7/8" | 1/4"-20 | 2 7/8" | 2 1/8" | 5/8" | 50 | 50 | 1/2" Drywall | 0.46" | 0.205" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 25 | 000000000 | 00000 | 25 | 000000000 | 00000 |
| 4" | 2 7/8" | 1/4"-20 | 3 7/8" | 2 1/8" | 5/8" | 50 | 50 | 1/2" Drywall | 0.46" | 0.205" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 25 | 000000000 | 00000 | 25 | 000000000 | 00000 |
5/16" Dia. | ||||||||||||||||||
| 3" | 1 1/2" | 5/16"-18 | 2 7/8" | 2 5/8" | 7/8" | 60 | 60 | 1/2" Drywall | 0.57" | 0.24" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 10 | 000000000 | 00000 | 10 | 000000000 | 00000 |
| 4" | 2 1/2" | 5/16"-18 | 3 7/8" | 2" | 7/8" | 60 | 60 | 1/2" Drywall | 0.59" | 0.25" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 10 | 000000000 | 00000 | 10 | 000000000 | 00000 |
3/8" Dia. | ||||||||||||||||||
| 3" | 1 3/8" | 3/8"-16 | 2 7/8" | 3" | 7/8" | 60 | 60 | 1/2" Drywall | 0.691" | 0.25" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 10 | 000000000 | 00000 | 25 | 000000000 | 00000 |
| 4" | 2 5/8" | 3/8"-16 | 3 7/8" | 3" | 7/8" | 60 | 60 | 1/2" Drywall | 0.691" | 0.25" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 10 | 000000000 | 00000 | 25 | 000000000 | 00000 |
| 5" | 3 3/8" | 3/8"-16 | 4 7/8" | 3" | 7/8" | 60 | 60 | 1/2" Drywall | 0.691" | 0.25" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 10 | 000000000 | 00000 | 25 | 000000000 | 00000 |
| 6" | 4 3/8" | 3/8"-16 | 5 7/8" | 3" | 7/8" | 60 | 60 | 1/2" Drywall | 0.691" | 0.25" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 5 | 000000000 | 00000 | 25 | 000000000 | 00000 |
1/2" Dia. | ||||||||||||||||||
| 4" | 1 1/2" | 1/2"-13 | 3 7/8" | 4 3/4" | 1 1/4" | 75 | 75 | 1/2" Drywall | 0.785" | 0.36" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 5 | 000000000 | 00000 | 10 | 000000000 | 00000 |
| 6" | 3 1/2" | 1/2"-13 | 4 7/8" | 4 3/4" | 1 1/4" | 75 | 75 | 1/2" Drywall | 0.785" | 0.36" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 5 | 000000000 | 00000 | 10 | 000000000 | 00000 |
Stud-Style Toggle Bolts
Use these stud-style anchors with nuts. A spring-loaded toggle holds against the back of the material. To install, insert the bolt through your fixture and thread the toggle onto it. Next, fold the toggle wings flush against the bolt and push them through a drilled hole until they pop open on the other side. Pull back on the bolt and tighten. All are zinc-plated steel to resist corrosion in wet environments. Bolts are reusable, but the toggle will fall behind the wall when the bolt is removed.
For technical drawings and 3-D models, click on a part number.
Flat Head Toggle Bolts
Bolts are beveled under the head for use in countersunk holes. A spring-loaded toggle holds against the back of the material. To install, insert the bolt through your fixture and thread the toggle onto it. Next, fold the toggle wings flush against the bolt and push them through a drilled hole until they pop open on the other side. Pull back on the bolt and tighten. In denser materials such as high-strength concrete, use a drill bit that is 1/16" larger than the size listed.
Bolts are zinc-plated steel to resist corrosion in wet environments. The bolt is reusable, but the toggle will fall behind the wall when the bolt is removed. Extra toggles are sold separately.
For technical drawings and 3-D models, click on a part number.
Toggle Bolts | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread | Strength, lbs. | Head | Extra Toggles | |||||||||||||||
| Lg. | Usable Lg. | Size | Lg. | Wing Span | Drill Bit Size | Pull-Out | Shear | Tested In | Dia. | Ht. | Drive Style | For Use In | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||
Zinc-Plated Steel | ||||||||||||||||||
3/16" Dia. | ||||||||||||||||||
| 3" | 1 3/4" | 10-24 | 2 3/4" | 2 1/8" | 1/2" | 45 | 45 | 1/2" Drywall | 0.385" | 0.116" | Slotted | Drywall, Plaster, Wood Paneling | 50 | 000000000 | 000000 | 50 | 000000000 | 000000 |
| 4" | 2 3/4" | 10-24 | 3 3/4" | 2 1/8" | 1/2" | 45 | 45 | 1/2" Drywall | 0.385" | 0.116" | Slotted | Drywall, Plaster, Wood Paneling | 50 | 000000000 | 00000 | 50 | 000000000 | 00000 |
1/4" Dia. | ||||||||||||||||||
| 3" | 1 5/8" | 1/4"-20 | 2 3/4" | 2 1/8" | 5/8" | 50 | 50 | 1/2" Drywall | 0.507" | 0.153" | Slotted | Drywall, Plaster, Wood Paneling | 25 | 000000000 | 00000 | 25 | 000000000 | 00000 |
Low-Profile Rounded Head Toggle Bolts
A shallow head makes these bolts good for low-clearance applications. The spring-loaded toggle holds against the back of the material. To install, insert the bolt through your fixture and thread the toggle onto it. Next, fold the toggle wings flush against the bolt and push them through a drilled hole until they pop open on the other side. Pull back on the bolt and tighten. In denser materials such as high strength concrete, use a drill bit that is 1/16" larger than the size listed.
Bolts are zinc-plated steel to resist corrosion in wet environments. The bolt is reusable, but the toggle will fall behind the wall when the bolt is removed.
For technical drawings and 3-D models, click on a part number.
Thread | Strength, lbs. | Head | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Usable Lg. | Size | Lg. | Wing Span | Drill Bit Size | Pull-Out | Shear | Tested In | Dia. | Ht. | Drive Style | For Use In | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||||||||
1/8" Dia. | |||||||||||||||
| 3" | 2 1/8" | 6-32 | 2 31/32" | 1 1/2" | 3/8" | 35 | 30 | 1/2" Drywall | 0.321" | 0.086" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 50 | 000000000 | 00000 |
| 4" | 3 1/8" | 6-32 | 3 31/32" | 1 1/2" | 3/8" | 35 | 30 | 1/2" Drywall | 0.321" | 0.086" | Slotted/Phillips | Drywall, Plaster, Wood Paneling | 50 | 000000000 | 00000 |
Toggle Bolt Anchor Assortments for Drywall, Plaster, and Wood Paneling
A wing-like toggle holds against the back of the material and spreads the force over a large area to hold 30 lbs. or more. The bolt is reusable, but the toggle will fall behind the wall when the bolt is removed. To install, insert the bolt through your fixture and thread the toggle onto it. Next, fold the toggle wings flush against the bolt and push them through a drilled hole until they pop open on the other side. Pull back on the bolt and tighten. Bolts are zinc-plated steel to resist corrosion in wet environments.
| Number of Pieces | Toggle Bolts Included | Container Type | Each | |
Zinc-Plated Steel | ||||
|---|---|---|---|---|
| 100 | 1/8" × 3" Lg. (25 Pieces) 1/8" × 4" Lg. (25 Pieces) 3/16" × 3" Lg. (15 Pieces) 3/16" × 4" Lg. (15 Pieces) 1/4" × 3" Lg. (10 Pieces) 1/4" × 4" Lg. (10 Pieces) | Plastic Box | 000000000 | 0000000 |