These spacers have excellent wear and abrasion resistance. Exposure to moisture may cause them to expand.

Stick these supports to surfaces where you don't want to drill a hole. The snap-in end can be released for repairs and upgrades.

Wings add tension to strengthen the hold in a hole. The other end is releasable for repairs and upgrades.

The flat top supports boards without drilling a hole while wings on the other end add tension for a secure hold in a hole.

In enclosures and other places where you don’t want to drill a hole, mount circuit boards and other thin panels with these supports.

These metric nuts resist oil, grease, and solvents (except mineral acids).

These nylon 6/6 wing nuts are chemical resistant, nonconductive, and lightweight.

The nylon cap covers and grips the threads to resist loosening.

These nylon flange locknuts form threads as they're tightened to resist vibration.

Made of chemical-resistant 18-8 stainless steel, these metric screws have an extra-soft nylon tip that reduces the noise, vibration, and damage that can occur from metal-on-metal contact. Use them on soft surfaces such as aluminum.

Available in metric sizes, these alloy steel set screws have an extra-soft nylon tip that minimizes the damage that can occur from metal-on-metal contact. Use them on soft surfaces such as aluminum.

Also known as shoulder washers.

These metric threaded rods are made from nylon 6/6 and resist oil, grease, and solvents. They’re nonconductive, making them good for use around sensitive electrical components.

Also known as shoulder and insulator washers, these nonmetal washers block electrical current and prevent corrosion from mating different types of metal.

These anchors are also known as drive rivets. To install, hammer the pin into the body. Pry out the pin to remove.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

This nylon 6/6 material is modified with MDS for a self-lubricating surface that’s more slippery than standard nylon. It's often used in high-friction applications, such as gears and bearings.

Designed for extreme wear resistance, this Kevlar-filled nylon 6/6 material lasts up to 20 times longer than unfilled nylon. Also known as Hydlar Z, it is often used for parts that are continuously exposed to wear and abrasion, such as wear strips and bushings.

With glass reinforcement, this nylon 6/6 material is stronger than standard nylon, plus it can withstand higher temperatures. It’s widely used in high-stress applications, such as caster wheels and automotive parts.

Mount components to your enclosure without worrying about leaks—these kits seal out water from washdowns, rain, and snow when used with enclosures rated NEMA 4X.