Slide drawers, panels, and doors with these tracks and rollers.

For applications with low clearance, these carriages protrude less than 5 mm above their rails.

Threaded inserts secure the bearing to the carriage and prevent it from loosening due to frequent starts and stops.

With a wide base, these sleeve bearing carriages stabilize moment (twisting) and off-center loads better than standard carriages. Use in areas where multiple carriages or rails won't fit.

C-shaped guide rails grip the carriage around the outside to support linear motion along walls and other vertical surfaces.

Create a self-aligning system that can be locked in place with these carriages and guide rails.

Fasten loads on the side of these carriages and add linear motion to a T-slot assembly.

Use these carriages and guide rails in temperatures up to 300° F.

Build loops, circuits, and curved paths in assembly stations and other repetitive processes.

These carriages and guide rails are steel.

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails.

Designed specifically for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.

Suitable for clean room use, these carriages and guide rails are made entirely of stainless steel.

Adapt most 15 mm guide rails to fit on T-slotted assemblies.

Run many cycles in tight spaces before replacing or re-greasing carriages.

With a plastic cage that surrounds the ball bearings to prevent them from colliding, these extra-wide carriages run quietly for many cycles without needing maintenance. All of these carriages have a wide base and low-profile design to stabilize moment (twisting) and off-center loads better than other carriages.

Use these carriages and guide rails for light loads where precise movement is not required.

Create a self-aligning carriage and guide rail system to compensate for mounting surfaces that aren't parallel.

Needle-roller bearings give these track roller carriages higher load capacities than other track roller carriages.

V-shaped rollers and rails allow these carriages to operate well in dirty environments because the debris won't get trapped on the rail.

Nylon rollers provide low-friction movement for light loads and corrosive environments.