Threaded inserts secure the bearing to the carriage and prevent it from loosening due to frequent starts and stops.

Threaded inserts secure the bearing to the carriage and prevent it from loosening due to frequent starts and stops.

Compensate for rail misalignment in low-clearance applications with these carriages and guide rails.

Create a self-aligning system that can be locked in place with these carriages and guide rails.

A floating bearing in these self-aligning carriages adjusts to compensate for misalignment between rails, so your carriages still move in tandem.

With a wide base, these sleeve bearing carriages stabilize moment (twisting) and off-center loads better than standard carriages. Use in areas where multiple carriages or rails won't fit.

C-shaped guide rails grip the carriage around the outside to support linear motion along walls and other vertical surfaces.

A handle locks these carriages in place on curved paths, loops, and circuits in assembly stations and other repetitive processes.

Mount along a wall or other vertical surface.

Use these carriages and guide rails for light loads where precise movement is not required.

Needle-roller bearings give these track roller carriages higher load capacities than other track roller carriages.

Nylon rollers provide low-friction movement for light loads and corrosive environments.

High-temperature PTFE-thickened grease enables these carriages to operate in temperatures up to 500° F, higher than any other carriage that we offer.

These carriages and guide rails are steel.

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails.

Suitable for clean room use, these carriages and guide rails are made entirely of stainless steel.

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails.

Designed for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.

Small enough to fit in a camera zoom lens and other precision motion applications, these carriages and guide rails have a black chrome-plated finish that diffuses light to prevent reflecting light from causing equipment to malfunction.

Mount to vertical surfaces for applications where tight tolerances aren't required.

With a plastic cage that surrounds the ball bearings to prevent them from colliding, these extra-wide carriages run quietly for many cycles without needing maintenance. All of these carriages have a wide base and low-profile design to stabilize moment (twisting) and off-center loads better than other carriages.

Made of stainless steel, these track rollers and guide rails are more corrosion resistant than steel rollers and rails.

Create your own positioning table or telescoping slide. Sets include four rails, two roller bearing cages, and eight end stops.

Slides have a row of ball bearings on each side of the rail.

A linear scale and micrometer-like hand wheel measure travel distance in increments of 0.001".

A micrometer handle ensures accurate, repeatable positioning along a single axis—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

Two micrometer handles ensure accurate, repeatable positioning along two axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

Three micrometer handles ensure accurate, repeatable positioning along three axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

Mount components to these load-rated bearings and track rollers to add linear motion along T-slotted rails.

Build test fixtures, prototypes, and other small structures with this miniature version of T-slotted framing and fittings.

When you don't have enough clearance for side-mount or under-the-counter slides, mount these to the base of your drawer.

These slides gradually slow the drawer's motion to prevent it from slamming open.

The stacked design provides stability for deep and wide drawers.

Slides only extend 3/4 of the closed length to reduce the chance that a heavy load will tip your cabinet.

When you push on the drawer, these slides force the drawer open.

Open drawers from either side of a cart or cabinet—these slides let drawers pass through for two-way access to contents.

With fewer moving parts than other lock-open drawer slides, these collect less debris for a longer service life.

These slides provide full extension for convenient access to the back of your drawers.

For smoother operation, these sets include upper and lower roller track for hanging lightweight cabinet doors that slide past each other.

Modify the stroke length on these air slides to meet changing application requirements—slides have adjustable shaft collars on the guide rods that you can move to fine-tune the stroke length.

With PTFE sleeve bearings and a low-friction ball screw, these slides don’t require the mess and maintenance of lubrication but still give you precise positioning anywhere along the length of their stroke.