McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    5 Products

    Eyebolts—For Lifting

    Also known as machinery eyebolts.
    Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings. Eyebolts without shoulder are for vertical lifting only.
    Warning: Never use to lift people or items over people.
    Steel
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Eyebolts—For Lifting, Closed Eye, With Shoulder.
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Eyebolts—For Lifting, Closed Eye, Without Shoulder.

    Closed Eye

    With Shoulder

    Closed Eye,

    Without

    Shoulder

    Closed Eye—Closed eyes are stronger than bent-closed eyes.
    Thread
    With Shoulder
    Without Shoulder
    Size
    Lg.
    Shank
    Lg.
    Eye
    Dia.
    Vert. Cap.,
    lb.
    Specs.
    Met
    Threading
    Overall
    Lg.
    Each
    Overall
    Lg.
    Each
    Closed Eye
    1 3/4"-5
    		3 3/4"3 3/4"2 7/8"28,000ASTM A489Fully Threaded11 1/8"000000000000009 3/4"00000000000000
     
    Zinc-Plated Steel
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Eyebolts—For Lifting, Closed Eye, With Shoulder.
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Eyebolts—For Lifting, Closed Eye, Without Shoulder.

    Closed Eye

    With Shoulder

    Closed Eye,

    Without

    Shoulder

    Zinc-plated steel eyebolts offer good corrosion resistance.
    Closed Eye—Closed eyes are stronger than bent-closed eyes.
    Thread
    With Shoulder
    Without Shoulder
    Size
    Lg.
    Shank
    Lg.
    Eye
    Dia.
    Vert. Cap.,
    lb.
    Specs.
    Met
    Threading
    Overall
    Lg.
    Each
    Overall
    Lg.
    Each
    Closed Eye
    1 3/4"-5
    		3 3/4"3 3/4"2 7/8"28,000ASTM A489Fully Threaded11 1/8"0000000000000009 3/4"000000000000000
     

    Swivel-Under-Load Hoist Rings—For Lifting

    Image of Product. Front orientation. Hoist Rings. Swivel-Under-Load Hoist Rings—For Lifting.
    Image of Specification. 180° Pivot. Front orientation. Contains Annotated. 180° Pivot. Swivel-Under-Load Hoist Rings—For Lifting, Swivel-Under-Load.

    180° Pivot

    Image of Specification. 360° Swivel. Front orientation. Contains Annotated. 360° Swivel. Swivel-Under-Load Hoist Rings—For Lifting, Swivel-Under-Load.

    360° Swivel

    The ball bearing on these hoist rings makes it easy to rotate your load even after it’s suspended. For unbalanced or heavy loads, the base also swivels to compensate for pitch, roll, and sway. Their lifting ring pivots 180° front to back. Ideal for angular lifting, these hoist rings withstand stresses that bend or break eyebolts.
    Install the base of these hoist rings flush to your mounting surface. Use a torque wrench to tighten to the recommended torque stamped on the ring.
    Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
    Warning: Never use to lift people or items over people.
    Thread
    Size
    Thread
    Lg.
    Inside
    Wd.
    Overall
    Ht.
    Vert. Cap.,
    lb.
    Movement
    Specs. Met
    Certification
    Each
     
    Forged Yellow Powder-Coated Steel
    1 3/4"-5
    		2 5/8"2 3/4"13 1/4"28,210180° Pivot and 360° SwivelASME B30.26CE Marked
    		00000000000000
     
    back to top