About Rod Ends
More
Eyebolts—For Lifting
Also known as machinery eyebolts.
Zinc-plated steel eyebolts offer good corrosion resistance.
Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings. Eyebolts without shoulder are for vertical lifting only.
Warning: Never use to lift people or items over people.
Corrosion-Resistant Fully Threaded Rod End Bolts
These rod end bolts are good for wet and corrosive environments—for maximum mounting flexibility, cut the fully threaded shaft to whatever length you need. Also known as swing bolts and eyebolts, rod end bolts have no moving parts. They're designed to make pivoting or hinge movements in applications that don't need to compensate for misalignment.
303 and 304 stainless steel rod end bolts won't rust in humid, wet, and washdown environments. They're stronger than brass bolts and nearly as strong as steel. They will rust when exposed to salt water and chemicals, however. Black-oxide 303 stainless steel rod end bolts have a matte-black finish that adds some corrosion resistance but is mostly chosen for its looks.
17-4 PH stainless steel rod end bolts have the most tensile strength—a similar amount to high-strength alloy steel. They also won’t rust in humid, wet, and washdown environments. Even at high temperatures, they maintain their excellent strength and corrosion resistance, so they’re often used in automotive drive trains and heat exchangers. However, they’ll rust when exposed to salt water and chemicals.
316 stainless steel rod end bolts are our most corrosion resistant, and they're nearly as strong as steel rod end bolts. Use them in areas with salt water, chlorine, and chemicals without worrying about rust.
ASTM rod end bolts meet a standard for material.
| Shank Thread Size | ID | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | O'all Thick. | Tensile Strength, psi  | Specifications Met | Fastener Strength Grade/Class | Each | |
Right-Hand Threaded Shank | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
303 Stainless Steel | ||||||||||
| 1/4"-28 | 1/4" | 5/8" | 2" | 1 1/2" | 1/4" | 90,000 | ASTM A582 | __ | 00000000 | 000000 |
| 1/4"-28 | 1/4" | 5/8" | 3" | 2 1/2" | 1/4" | 90,000 | ASTM A582 | __ | 00000000 | 00000 |
Black-Oxide 303 Stainless Steel | ||||||||||
| 1/4"-28 | 1/4" | 5/8" | 3" | 2 1/2" | 1/4" | 90,000 | ASTM A582 | __ | 00000000 | 00000 |
304 Stainless Steel | ||||||||||
| 1/4"-28 | 1/4" | 5/8" | 3 1/2" | 3 1/8" | 1/4" | 75,000 | ASTM A193 | ASTM Grade B8 | 0000000 | 00000 |
17-4 PH Stainless Steel | ||||||||||
| 1/4"-28 | 1/4" | 5/8" | 2" | 1 1/2" | 1/4" | 160,000 | ASTM A564 | __ | 00000000 | 00000 |
| 1/4"-28 | 1/4" | 5/8" | 3" | 2 1/2" | 1/4" | 160,000 | ASTM A564 | __ | 00000000 | 00000 |
316 Stainless Steel | ||||||||||
| 1/4"-28 | 1/4" | 5/8" | 2" | 1 1/2" | 1/4" | 75,000 | ASTM A276 | __ | 00000000 | 00000 |
Fully Threaded Rod End Bolts
For maximum mounting flexibility, cut the fully threaded shaft to whatever length you need. Also known as swing bolts and eyebolts, rod end bolts have no moving parts. They're designed to make pivoting or hinge movements in applications that don't need to compensate for misalignment.
| Shank Thread Size | ID | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | O'all Thick. | Tensile Strength, psi | Specifications Met | Material | Each | |
Right-Hand Threaded Shank | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1/4"-28 | 1/4" | 5/8" | 3 1/2" | 3 1/8" | 1/4" | 60,000 | ASTM A521 Class CA | Black-Oxide Carbon Steel | 0000000 | 000000 |
High-Strength Fully Threaded Rod End Bolts
These alloy steel rod end bolts have the highest tensile strength of any steel fully threaded rod end bolt we offer. For maximum mounting flexibility, cut the fully threaded shaft to whatever length you need. Also known as swing bolts and eyebolts, rod end bolts have no moving parts. They're designed to make pivoting or hinge movements in applications that don't need to compensate for misalignment.
| Shank Thread Size | ID | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | O'all Thick. | Tensile Strength, psi | Fastener Strength Grade/Class | Specifications Met | Material | Each | |
Right-Hand Threaded Shank | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/4"-28 | 1/4" | 5/8" | 3 1/2" | 3 1/8" | 1/4" | 125,000 | ASTM Grade B7 | ASTM A193 | Black-Oxide Alloy Steel | 0000000 | 000000 |
Ball Joint Rod Ends
Made of steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends. They don’t come lubricated, so you’ll need to lubricate during installation and on an ongoing basis.
Rod ends with an oversized shank have a shank that is one size larger than the ID to handle greater stress.
Zinc-plated steel rod ends provide moderate corrosion resistance.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
Ball Joints | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/4"-28 | 1/4" | 27° | 3/4" | 3/8" | 1 9/16" | 1" | 2,800 | Zinc-Plated Carbon Steel | 00000000 | 00000 | |
Ball Joints with Oversized Shank | |||||||||||
| 1/4"-28 | 3/16" | 20° | 3/4" | 5/16" | 1 9/16" | 1" | 3,400 | Zinc-Plated Carbon Steel | 00000000 | 0000 | |
Internally Threaded Ball Joint Rod Ends
Made of steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends. They don’t come lubricated, so you’ll need to lubricate them during installation and on an ongoing basis.
Rod ends with an oversized shank have a shank that is one size larger than the ID to handle greater stress.
Zinc-plated steel rod ends provide moderate corrosion resistance.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
Ball Joints | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/4"-28 | 1/4" | 27° | 3/4" | 3/8" | 1 5/16" | 11/16" | 3,800 | Zinc-Plated Carbon Steel | 00000000 | 00000 | |
Ball Joints with Oversized Shank | |||||||||||
| 1/4"-28 | 3/16" | 20° | 3/4" | 5/16" | 1 5/16" | 11/16" | 4,150 | Zinc-Plated Carbon Steel | Right Hand | 00000000 | 0000 |
Lubrication-Free Ball Joint Rod Ends
A carbon fiber-reinforced insert or PTFE liner reduces wear, handles shock loads, and eliminates the need for lubrication. Made of steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends. All are zinc plated, so they resist corrosion for a short time before the finish is consumed and the steel is exposed.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
| 1/4"-28 | 1/4" | 16° | 3/4" | 3/8" | 1 9/16" | 1" | 2,150 | Zinc-Plated Carbon Steel | 0000000 | 00000 |
Internally Threaded Lubrication-Free Ball Joint Rod Ends
A carbon fiber-reinforced insert or PTFE liner reduces wear, handles shock loads, and eliminates the need for lubrication. Made of steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends. All are zinc plated, so they resist corrosion for a short time before the finish is consumed and the steel is exposed.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
| 1/4"-28 | 1/4" | 16° | 3/4" | 3/8" | 1 5/16" | 11/16" | 2,500 | Zinc-Plated Carbon Steel | 0000000 | 00000 |
Ball Joint Rod Ends with Nut
For ease of installation, these rod ends come with a compatible jam nut. They have an eyelet and a ball that swivel to support angular misalignment. All are carbon steel, so they handle higher loads than stainless steel, aluminum, and nylon rod ends. However, they don’t resist corrosion. They need to be lubricated when first installed and periodically after that. Apply any type of bearing grease to the ball, and rotate it to work it into the races.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
| 1/4"-28 | 1/4" | 27° | 3/4" | 3/8" | 1 9/16" | 1" | 2,800 | Zinc-Plated Carbon Steel | 00000000 | 00000 |
Oil-Embedded Ball Joint Rod Ends
An oil-embedded bronze insert slowly releases lubricant throughout the life of the rod end. These rod ends will require ongoing lubrication. Made of zinc-plated steel, they generally handle higher loads than stainless steel, aluminum, and nylon rod ends and offer moderate corrosion resistance.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
| 1/4"-28 | 1/4" | 16° | 3/4" | 3/8" | 1 9/16" | 1" | 2,150 | Zinc-Plated Carbon Steel | 0000000 | 00000 |
Internally Threaded Oil-Embedded Ball Joint Rod Ends
An oil-embedded bronze insert slowly releases lubricant throughout the life of the rod end. These rod ends will require ongoing lubrication. Made of zinc-plated steel, they generally handle higher loads than stainless steel, aluminum, and nylon rod ends and offer moderate corrosion resistance.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
| 1/4"-28 | 1/4" | 16° | 3/4" | 3/8" | 1 5/16" | 11/16" | 2,500 | Zinc-Plated Carbon Steel | 00000000 | 00000 |
Internally Threaded Ultra-Precision Ball Joint Rod Ends
Made to extremely tight tolerances, these rod ends are for applications that require positioning accuracy, such as accelerators and other types of control linkages. Rod ends are steel and generally handle higher loads than stainless steel, aluminum, and nylon rod ends. They have a heat-treated steel ball for added strength and a brass insert for smooth operation. They come lubricated, so you won't need to lubricate them at installation. They will require ongoing lubrication.
Zinc- and cadmium-plated rod ends provide moderate corrosion resistance.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Shank Thread Direction | Each | |
| 1/4"-28 | 1/4" | 13° | 3/4" | 3/8" | 1 5/16" | 3/4" | 2,700 | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 000000 |
Ultra-Precision Ball Joint Rod Ends
Made to extremely tight tolerances, these rod ends are for applications that require positioning accuracy, such as accelerators and other types of control linkages. Rod ends are steel and generally handle higher loads than stainless steel, aluminum, and nylon rod ends. They have a heat-treated steel ball for added strength and a brass insert for smooth operation. They come lubricated, so you won't need to lubricate them at installation.
Zinc- and cadmium-plated rod ends provide moderate corrosion resistance.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Shank Thread Direction | Each | |
| 1/4"-28 | 1/4" | 13° | 3/4" | 3/8" | 1 9/16" | 1" | 1,700 | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 000000 |
Extended-Life Ball Joint Rod Ends
Seals keep out dirt and an oil-embedded foam insert slowly releases lubricant for a long life. You can remove the insert to add more oil if it starts to run dry. These rod ends have an eyelet and a ball that swivels to support angular misalignment. Made of zinc-plated steel, they have moderate corrosion resistance.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
| 1/4"-28 | 1/4" | 27° | 3/4" | 7/16" | 1 9/16" | 1" | 1,800 | Zinc-Plated Carbon Steel | 0000000 | 000000 |
Corrosion-Resistant Ball Joint Rod Ends
Made of stainless steel, these rod ends provide excellent corrosion resistance. A PTFE liner allows smooth ball rotation and eliminates the need for lubrication.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
| 1/4"-28 | 1/4" | 27° | 3/4" | 3/8" | 1 9/16" | 1" | 1,350 | 303 Stainless Steel | 00000000 | 000000 |
Internally Threaded Corrosion-Resistant Ball Joint Rod Ends
Made of stainless steel, these rod ends provide excellent corrosion resistance. A PTFE liner allows smooth ball rotation and eliminates the need for lubrication.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
| 1/4"-28 | 1/4" | 27° | 3/4" | 3/8" | 1 5/16" | 11/16" | 1,350 | 303 Stainless Steel | 00000000 | 000000 |
Lightweight Corrosion-Resistant Ball Joint Rod Ends
These anodized aluminum rod ends are lighter than stainless steel rod ends and have good corrosion resistance. A PTFE liner allows smooth ball rotation and eliminates the need for lubrication.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
| 1/4"-28 | 1/4" | 16° | 3/4" | 3/8" | 1 9/16" | 1" | 2,450 | Anodized 7075 Aluminum | 00000000 | 000000 |
Internally Threaded Lightweight Corrosion-Resistant Ball Joint Rod Ends
These anodized aluminum rod ends are lighter than stainless steel rod ends and have good corrosion resistance. A PTFE liner allows smooth ball rotation and eliminates the need for lubrication.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
| 1/4"-28 | 1/4" | 16° | 3/4" | 3/8" | 1 5/16" | 11/16" | 2,550 | Anodized 7075 Aluminum | 00000000 | 000000 |
Internally Threaded Chemical-Resistant Ball Joint Rod Ends
Made of impact-resistant nylon, these rod ends withstand corrosion as well as fuels, lyes, and weak acids. They are also 80% lighter than steel rod ends. A self-lubricating nylon ball provides maximum abrasion resistance and eliminates the need for lubrication.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Temp. Range, °F | Material | Specifications Met | Choose a Shank Thread Direction | Each | |
| 1/4"-28 | 1/4" | 25° | 3/4" | 3/8" | 1 5/16" | 11/16" | 90 | -20° to 175° | Nylon Plastic | ISO 12240-4 | 0000000 | 00000 |
Chemical-Resistant Ball Joint Rod Ends
Made of impact-resistant nylon, these rod ends withstand corrosion as well as fuels, lyes, and weak acids. They are also 80% lighter than steel rod ends. A self-lubricating nylon ball provides maximum abrasion resistance and eliminates the need for lubrication.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Temp. Range, °F | Material | Specifications Met | Choose a Shank Thread Direction | Each | |
| 1/4"-28 | 1/4" | 25° | 3/4" | 3/8" | 1 9/16" | 1" | 20 | -20° to 175° | Nylon Plastic | ISO 12240-4 | 0000000 | 00000 |
High-Load Ball Joint Rod Ends
Rod ends with Nylon/PTFE insert have a durable, self-sealing insert that reduces wear. Rod ends with zinc-plated steel insert provide moderate corrosion resistance.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
Ball Joints | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Nylon/PTFE Plastic Blend Insert | |||||||||||
| 1/4"-28 | 1/4" | 16° | 3/4" | 3/8" | 1 9/16" | 1" | 5,250 | Chrome-Moly Steel | 000000 | 000000 | |
Zinc-Plated Alloy Steel Insert and PTFE Plastic Liner | |||||||||||
| 1/4"-28 | 1/4" | 16° | 3/4" | 3/8" | 1 9/16" | 1" | 5,250 | Zinc-Plated Alloy Steel | 00000000 | 00000 | |
Internally Threaded High-Load Ball Joint Rod Ends
These steel rod ends handle loads that are at least 25% higher than other comparably sized rod ends. PTFE allows smooth rotation and eliminates the need for lubrication.
Rod ends with Nylon/PTFE insert have a durable, self-sealing insert that reduces wear. Rod ends with zinc-plated steel insert provide moderate corrosion resistance.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
Ball Joints | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Nylon/PTFE Plastic Blend Insert | |||||||||||
| 1/4"-28 | 1/4" | 16° | 3/4" | 3/8" | 1 5/16" | 3/4" | 6,150 | Chrome-Moly Steel | 0000000 | 000000 | |
Zinc-Plated Alloy Steel Insert and PTFE Plastic Liner | |||||||||||
| 1/4"-28 | 1/4" | 16° | 3/4" | 3/8" | 1 5/16" | 3/4" | 6,150 | Zinc-Plated Alloy Steel | 00000000 | 00000 | |
Internally Threaded High-Speed Ball Bearing Rod Ends
A double row of precision ball bearings allows high speeds and smooth operation. Seals keep lubricant in and dirt out.
Cadmium-plated alloy steel rod ends offer moderate corrosion resistance. They have an oversized shank, which is one size larger than the ID, to handle greater stress. Their lubricant meets MIL-PRF-81322. These rod ends won't require ongoing lubrication.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Specifications Met | Shank Thread Direction | Each | |
Ball Joints with Oversized Shank | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Cadmium-Plated Alloy Steel | |||||||||||
| 1/4"-28 | 3/16" | 20° | 3/4" | 1/2" | 1 3/8" | 3/4" | 1,000 | MIL-PRF-81322, MS21153 | Right Hand | 0000000 | 0000000 |
High-Speed Ball Bearing Rod Ends
A double row of precision ball bearings allows high speeds and smooth operation. Rod ends are made of cadmium- or zinc-plated steel, which both offer moderate corrosion resistance. Seals keep lubricant in and dirt out.
Cadmium-plated steel rod ends have lubricant that meets MIL-PRF-81322. They won’t require ongoing lubrication. Those with an oversized shank have a shank that is one size larger than the ID to handle greater stress.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Specifications Met | Shank Thread Direction | Each | |
Ball Joints with Oversized Shank | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Cadmium-Plated Alloy Steel | |||||||||||
| 1/4"-28 | 3/16" | 20° | 3/4" | 7/16" | 1 9/16" | 1" | 1,000 | MIL-PRF-81322, MS21151 | Right Hand | 0000000 | 0000000 |
Internally Threaded Thrust-Rated Ball Joint Rod Ends
An innovative body design keeps the ball from being pushed out when supporting thrust loads. Rod ends are zinc-plated steel for moderate corrosion resistance and have a self-lubricating polyurethane insert.
Static Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Radial | Thrust | Temp. Range, °F | Material | Shank Thread Direction | Each | |
| 1/4"-28 | 1/4" | 36° | 13/16" | 3/8" | 1 3/16" | 9/16" | 1,100 | 330 | -40° to 175° | Zinc-Plated Carbon Steel | Right Hand | 00000000 | 000000 |
Thrust-Rated Ball Joint Rod Ends
An innovative body design keeps the ball from being pushed out when supporting thrust loads. Rod ends are zinc-plated steel for moderate corrosion resistance and have a self-lubricating polyurethane insert.
Static Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Radial | Thrust | Temp. Range, °F | Material | Shank Thread Direction | Each | |
| 1/4"-28 | 1/4" | 36° | 13/16" | 3/8" | 1 7/16" | 15/16" | 1,100 | 330 | -40° to 175° | Zinc-Plated Carbon Steel | Right Hand | 00000000 | 000000 |
Swivel-Shaft Rod Ends
With a ball joint at the top of the shank, these rod ends pivot in the middle of the body instead of in the eyelet. Use them for linear push applications that require movement along the length of the connecting rod. Also known as control swivels, they provide an excellent pivoting connection between light mechanical components while constraining excess play. A rubber disc dampens vibration.
Rod ends with set screw, nut, and lock washer have a self-locking set screw and integral nut with lock washer for added holding strength.
| Shank Thread Size | Shank Center Lg. | Shank Thread Lg. | ID | O'all Dia. | O'all Wd. | O'all Thick. | For Connecting Rod OD | Max. Ball Swivel | Temp. Range, °F | Material | Shank Thread Direction | Each | |
Ball Joints | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/4"-28 | 1 5/16" | 1/2" | 1/4" | __ | 3/8" | 3/8" | 1/4" | 30° | -60° to 250° | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 00000 |
Ball Joints with Set Screw, Nut, and Lock Washer | |||||||||||||
| 1/4"-28 | 1 3/16" | 5/16" | 5/16" | 1/2" | __ | __ | 1/4", 5/16" | 30° | -60° to 250° | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 0000 |
| 1/4"-28 | 1 5/16" | 1/2" | 5/16" | 1/2" | __ | __ | 1/4", 5/16" | 30° | -60° to 250° | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 0000 |