Filter by
DFARS Compliance
Thread Size
For Tap Thread Size
Thread Fit
Thread Spacing
Thread Type
Black-Phosphate Steel Easy-to-Install Thread-Locking Inserts
A black-phosphate finish provides mild corrosion resistance. Also known as E-Z Lok, these inserts use Loctite® adhesive to keep them in place. The adhesive reaches full strength after 72 hours. Installation requires a drill bit and a standard tap. Then set the insert with a bolt and two nuts, or use an installation bit.
Inserts with a thin wall are often used in small holes or near the edge of a workpiece.
Choose inserts with a thick wall for greater strength than thin-wall inserts, or to fill a large hole.
Inserts with an extra thick wall are stronger than thick- and thin-wall inserts. Use them to reduce the size of tapped holes.
To drive slotted inserts, you can use a slotted screwdriver instead of using an installation bit or a bolt and two nuts.
For technical drawings and 3-D models, click on a part number.
Inch
Installation Bit
Inserts | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For Tap | Installation Bits | ||||||||||
| Thread Size  | Thread Size | Thread Pitch, mm | Installed Lg. | Drill Bit Size | For Max. Hole Dia. | Drive Style | Pkg. Qty. | Pkg. | Each | ||
Black-Phosphate Steel with Thin Wall | |||||||||||
| 10-24 | 5/16"-18 | __ | 5/16" | I | 0.272" | Slotted | 10 | 000000000 | 00000 | 000000000 | 00000 |
| 10-32 | 5/16"-18 | __ | 5/16" | I | 0.272" | Slotted | 10 | 000000000 | 0000 | 000000000 | 0000 |
| 1/4"-20 | 3/8"-16 | __ | 3/8" | Q | 0.332" | Slotted | 10 | 000000000 | 00000 | 000000000 | 0000 |
| 1/4"-28 | 3/8"-16 | __ | 3/8" | Q | 0.332" | Slotted | 10 | 000000000 | 00000 | 000000000 | 0000 |
| 5/16"-18 | 7/16"-14 | __ | 7/16" | X | 0.397" | Slotted | 10 | 000000000 | 00000 | 000000000 | 0000 |
| 5/16"-24 | 7/16"-14 | __ | 7/16" | X | 0.397" | Slotted | 10 | 000000000 | 00000 | 000000000 | 0000 |
| 3/8"-16 | 1/2"-13 | __ | 1/2" | 29/64" | 29/64" | Slotted | 10 | 000000000 | 00000 | 000000000 | 0000 |
| 3/8"-24 | 1/2"-13 | __ | 1/2" | 29/64" | 29/64" | Slotted | 10 | 000000000 | 00000 | 000000000 | 0000 |
| 7/16"-14 | 9/16"-12 | __ | 9/16" | 33/64" | 33/64" | Slotted | 5 | 000000000 | 0000 | 000000000 | 0000 |
| 7/16"-20 | 9/16"-12 | __ | 9/16" | 33/64" | 33/64" | Slotted | 5 | 000000000 | 0000 | 000000000 | 0000 |
| 1/2"-13 | 5/8"-11 | __ | 5/8" | 37/64" | 37/64" | Slotted | 5 | 000000000 | 00000 | 000000000 | 00000 |
| 1/2"-20 | 5/8"-11 | __ | 5/8" | 37/64" | 37/64" | Slotted | 5 | 000000000 | 00000 | 000000000 | 00000 |
Black-Phosphate Steel with Thick Wall | |||||||||||
| 4-40 | 10-32 | __ | 1/4" | 5/32" | 5/32" | Slotted | 10 | 000000000 | 0000 | 000000000 | 0000 |
| 6-32 | 1/4"-20 | __ | 9/32" | No. 7 | 0.201" | Slotted | 10 | 000000000 | 0000 | 000000000 | 0000 |
| 6-32 | M6 | 1 | 6.5mm | 5.1 mm | 5.1mm | Slotted | 5 | 000000000 | 0000 | 000000000 | 0000 |
| 8-32 | 5/16"-18 | __ | 19/64" | F | 0.257" | Slotted | 10 | 000000000 | 0000 | 000000000 | 0000 |
| 8-32 | M8 | 1.25 | 7.5mm | 6.9 mm | 6.9mm | Slotted | 5 | 000000000 | 0000 | 000000000 | 0000 |
| 10-24 | 3/8"-16 | __ | 13/32" | 5/16" | 5/16" | Slotted | 10 | 000000000 | 00000 | 000000000 | 0000 |
| 10-24 | M8 | 1.25 | 7.5mm | 6.9 mm | 6.9mm | Slotted | 5 | 000000000 | 0000 | 000000000 | 0000 |
| 10-32 | 3/8"-16 | __ | 13/32" | 5/16" | 5/16" | Slotted | 10 | 000000000 | 00000 | 000000000 | 0000 |
| 10-32 | M8 | 1.25 | 7.5mm | 6.9 mm | 6.9mm | Slotted | 5 | 000000000 | 0000 | 000000000 | 0000 |
| 1/4"-20 | 7/16"-14 | __ | 7/16" | 23/64" | 23/64" | Slotted | 10 | 000000000 | 00000 | 000000000 | 0000 |
| 1/4"-20 | 7/16"-14 | __ | 1" | 23/64" | 23/64" | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| 1/4"-20 | M10 | 1.5 | 10.5mm | 8.6 mm | 8.6mm | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| 1/4"-28 | 7/16"-14 | __ | 7/16" | 23/64" | 23/64" | Slotted | 10 | 000000000 | 00000 | 000000000 | 0000 |
| 5/16"-18 | 1/2"-13 | __ | 31/64" | 27/64" | 27/64" | Slotted | 10 | 000000000 | 00000 | 000000000 | 0000 |
| 5/16"-18 | 1/2"-13 | __ | 1" | 27/64" | 27/64" | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| 5/16"-18 | M12 | 1.75 | 12.5mm | 10.4 mm | 10.4mm | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| 5/16"-24 | 1/2"-13 | __ | 31/64" | 27/64" | 27/64" | Slotted | 10 | 000000000 | 00000 | 000000000 | 0000 |
| 3/8"-16 | 9/16"-12 | __ | 33/64" | 31/64" | 31/64" | Slotted | 10 | 000000000 | 00000 | 000000000 | 0000 |
| 3/8"-16 | 9/16"-12 | __ | 1" | 31/64" | 31/64" | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| 3/8"-16 | M16 | 2 | 17mm | 14 mm | 14mm | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| 3/8"-24 | 9/16"-12 | __ | 33/64" | 31/64" | 31/64" | Slotted | 10 | 000000000 | 00000 | 000000000 | 0000 |
| 7/16"-14 | 5/8"-11 | __ | 21/32" | 17/32" | 17/32" | Slotted | 5 | 000000000 | 0000 | 000000000 | 0000 |
| 7/16"-20 | 5/8"-11 | __ | 21/32" | 17/32" | 17/32" | Slotted | 5 | 000000000 | 0000 | 000000000 | 0000 |
| 1/2"-13 | 3/4"-10 | __ | 21/32" | 21/32" | 21/32" | Slotted | 5 | 000000000 | 00000 | 000000000 | 00000 |
| 1/2"-13 | 3/4"-10 | __ | 1" | 21/32" | 21/32" | Slotted | 5 | 000000000 | 00000 | 000000000 | 00000 |
| 1/2"-13 | M16 | 2 | 17mm | 14 mm | 14mm | Slotted | 5 | 000000000 | 00000 | 000000000 | 00000 |
| 1/2"-20 | 3/4"-10 | __ | 21/32" | 21/32" | 21/32" | Slotted | 5 | 000000000 | 00000 | 000000000 | 00000 |
| 9/16"-12 | 3/4"-10 | __ | 21/32" | 21/32" | 21/32" | Slotted | 5 | 000000000 | 00000 | 000000000 | 00000 |
| 9/16"-18 | 3/4"-10 | __ | 21/32" | 21/32" | 21/32" | Slotted | 5 | 000000000 | 00000 | 000000000 | 00000 |
| 5/8"-11 | 7/8"-9 | __ | 11/16" | 49/64" | 49/64" | Slotted | 5 | 000000000 | 00000 | 000000000 | 00000 |
| 5/8"-11 | 7/8"-9 | __ | 1 1/8" | 49/64" | 49/64" | Slotted | 5 | 000000000 | 00000 | 000000000 | 00000 |
| 5/8"-18 | 7/8"-9 | __ | 11/16" | 49/64" | 49/64" | Slotted | 5 | 000000000 | 00000 | 000000000 | 00000 |
| 3/4"-10 | 1"-8 | __ | 25/32" | 7/8" | 7/8" | Slotted | 5 | 000000000 | 00000 | 000000000 | 00000 |
| 3/4"-16 | 1"-8 | __ | 25/32" | 7/8" | 7/8" | Slotted | 5 | 000000000 | 00000 | 000000000 | 00000 |
| 7/8"-9 | 1 1/4"-7 | __ | 1 1/8" | 1 7/64" | 1.1094" | Slotted | 1 | 000000000 | 00000 | 000000000 | 00000 |
| 7/8"-14 | 1 1/4"-7 | __ | 1 1/8" | 1 7/64" | 1.1094" | Slotted | 1 | 000000000 | 00000 | 000000000 | 00000 |
| 1"-8 | 1 3/8"-12 | __ | 1 1/4" | 1 9/32" | 1 9/32" | Slotted | 1 | 000000000 | 00000 | 000000000 | 00000 |
| 1"-14 | 1 3/8"-12 | __ | 1 1/4" | 1 9/32" | 1 9/32" | Slotted | 1 | 000000000 | 00000 | 000000000 | 00000 |
Black-Phosphate Steel with Extra Thick Wall | |||||||||||
| 1/4"-20 | 1/2"-13 | __ | 31/64" | 27/64" | 27/64" | Slotted | 10 | 000000000 | 00000 | 000000000 | 0000 |
| 5/16"-18 | 9/16"-12 | __ | 33/64" | 31/64" | 31/64" | Slotted | 10 | 000000000 | 00000 | 000000000 | 0000 |
| 3/8"-16 | 5/8"-11 | __ | 21/32" | 17/32" | 17/32" | Slotted | 5 | 000000000 | 0000 | 000000000 | 0000 |
| 1/2"-13 | 7/8"-9 | __ | 11/16" | 49/64" | 49/64" | Slotted | 5 | 000000000 | 00000 | 000000 | 00 |
| 5/8"-11 | 1"-8 | __ | 25/32" | 7/8" | 7/8" | Slotted | 5 | 000000000 | 00000 | 000000 | 00 |
Metric
Installation Bit
Inserts | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Tap | Installation Bits | ||||||||||||
| Thread Size | Thread Pitch, mm | Thread Spacing | Thread Size | Thread Pitch, mm | Installed Lg. | Drill Bit Size | For Max. Hole Dia. | Drive Style | Pkg. Qty. | Pkg. | Each | ||
Black-Phosphate Steel with Thin Wall | |||||||||||||
| M4 | 0.7 | Coarse | 5/16"-18 | __ | 5/16" | I | 0.272" | Slotted | 5 | 000000000 | 00000 | 000000000 | 00000 |
| M5 | 0.8 | Coarse | 5/16"-18 | __ | 5/16" | I | 0.272" | Slotted | 5 | 000000000 | 0000 | 000000000 | 0000 |
| M6 | 1 | Coarse | 3/8"-16 | __ | 3/8" | Q | 0.332" | Slotted | 5 | 000000000 | 0000 | 000000000 | 0000 |
| M8 | 1.25 | Coarse | 7/16"-14 | __ | 7/16" | X | 0.397" | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| M10 | 1.5 | Coarse | 1/2"-13 | __ | 1/2" | 29/64" | 29/64" | Slotted | 1 | 000000000 | 0000 | 000000000 | 0000 |
| M12 | 1.75 | Coarse | 5/8"-11 | __ | 5/8" | 37/64" | 37/64" | Slotted | 1 | 000000000 | 0000 | 000000000 | 0000 |
Black-Phosphate Steel with Thick Wall | |||||||||||||
| M3 | 0.5 | Coarse | M6 | 1 | 6.5mm | 5.1 mm | 5.1mm | Slotted | 10 | 000000000 | 00000 | 000000000 | 0000 |
| M4 | 0.7 | Coarse | M8 | 1.25 | 7.5mm | 6.9 mm | 6.9mm | Slotted | 10 | 000000000 | 00000 | 000000000 | 0000 |
| M5 | 0.8 | Coarse | M8 | 1.25 | 7.5mm | 6.9 mm | 6.9mm | Slotted | 10 | 000000000 | 00000 | 000000000 | 0000 |
| M6 | 1 | Coarse | 3/8"-16 | __ | 13/32" | 5/16" | 5/16" | Slotted | 10 | 000000000 | 0000 | 000000000 | 0000 |
| M6 | 1 | Coarse | M10 | 1.5 | 10.5mm | 8.6 mm | 8.6mm | Slotted | 5 | 000000000 | 0000 | 000000000 | 0000 |
| M8 | 1.25 | Coarse | 1/2"-13 | __ | 31/64" | 27/64" | 27/64" | Slotted | 10 | 000000000 | 00000 | 000000000 | 0000 |
| M8 | 1.25 | Coarse | M12 | 1.75 | 12.5mm | 10.4 mm | 10.4mm | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| M10 | 1.5 | Coarse | 9/16"-12 | __ | 33/64" | 31/64" | 31/64" | Slotted | 10 | 000000000 | 00000 | 000000000 | 0000 |
| M10 | 1.5 | Coarse | M16 | 2 | 17mm | 14 mm | 14mm | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| M10 | 1.25 | Fine | 9/16"-12 | __ | 33/64" | 31/64" | 31/64" | Slotted | 10 | 000000000 | 00000 | 000000000 | 0000 |
| M10 | 1 | Extra Fine | 9/16"-18 | __ | 29/64" | 33/64" | 33/64" | __ | 1 | 000000000 | 0000 | 000000 | 00 |
| M12 | 1.75 | Coarse | 3/4"-10 | __ | 21/32" | 21/32" | 21/32" | Slotted | 5 | 000000000 | 0000 | 000000000 | 0000 |
| M12 | 1.75 | Coarse | M16 | 2 | 17mm | 14 mm | 14mm | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| M12 | 1.25 | Extra Fine | 5/8"-18 | __ | 29/64" | 37/64" | 37/64" | __ | 1 | 000000000 | 0000 | 000000 | 00 |
| M12 | 1.25 | Extra Fine | 5/8"-18 | __ | 45/64" | 37/64" | 37/64" | __ | 1 | 000000000 | 0000 | 000000 | 00 |
| M14 | 2 | Coarse | 7/8"-9 | __ | 11/16" | 49/64" | 49/64" | Slotted | 5 | 000000000 | 00000 | 000000000 | 00000 |
| M14 | 1.25 | Extra Fine | 3/4"-16 | __ | 21/64" | 11/16" | 11/16" | __ | 5 | 000000000 | 0000 | 000000 | 00 |
| M14 | 1.25 | Extra Fine | 3/4"-16 | __ | 29/64" | 11/16" | 11/16" | __ | 5 | 000000000 | 0000 | 000000 | 00 |
| M14 | 1.25 | Extra Fine | 3/4"-16 | __ | 45/64" | 11/16" | 11/16" | __ | 1 | 000000000 | 0000 | 000000 | 00 |
| M14 | 1.25 | Extra Fine | M18 | 1.5 | 11.5mm | 16.5 mm | 16.5mm | __ | 1 | 000000000 | 0000 | 000000 | 00 |
| M16 | 2 | Coarse | 1"-8 | __ | 25/32" | 7/8" | 7/8" | Slotted | 5 | 000000000 | 00000 | 000000000 | 00000 |
| M16 | 2 | Coarse | M24 | 3 | 20mm | 21 mm | 21mm | Slotted | 1 | 000000000 | 0000 | 000000000 | 00000 |
| M18 | 1.5 | Fine | 1"-12 | __ | 29/64" | 59/64" | 59/64" | __ | 1 | 000000000 | 0000 | 000000 | 00 |
| M20 | 2.5 | Coarse | M36 | 4 | 30mm | 33 mm | 33mm | Slotted | 1 | 000000000 | 0000 | 000000000 | 00000 |
| M24 | 3 | Coarse | M36 | 4 | 30mm | 33 mm | 33mm | Slotted | 1 | 000000000 | 0000 | 000000000 | 00000 |
18-8 Stainless Steel Easy-to-Install Thread-Locking Inserts
Made of 18-8 stainless steel, these inserts have good corrosion resistance. Also known as E-Z Lok, they use Loctite® adhesive to keep them in place. The adhesive reaches full strength after 72 hours. They may be mildly magnetic. Installation requires a drill bit and a standard tap. Then set the insert with an installation bit, a slotted screwdriver, or a bolt with two nuts.
Inserts with a thin wall are often used in small holes or near the edge of a workpiece.
Choose inserts with a thick wall for greater strength than thin-wall inserts, or to fill a large hole.
Inserts with an extra thick wall are stronger than thick- and thin-wall inserts. Use them to reduce the size of tapped holes.
For technical drawings and 3-D models, click on a part number.
Inch
Installation Bit
Inserts | Installation Bits | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | For Tap Thread Size | Installed Lg. | Drill Bit Size | For Max. Hole Dia. | Drive Style | Pkg. Qty. | Pkg. | Each | ||
18-8 Stainless Steel with Thin Wall | ||||||||||
| 6-32 | 12-28 | 0.28" | No. 14 | 0.182" | Slotted | 5 | 000000000 | 000000 | 000000000 | 00000 |
| 8-32 | 1/4"-28 | 0.29" | No. 3 | 0.213" | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| 10-24 | 5/16"-24 | 0.313" | I | 0.272" | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| 10-32 | 5/16"-24 | 0.313" | I | 0.272" | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| 1/4"-20 | 3/8"-24 | 3/8" | Q | 0.332" | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| 1/4"-28 | 3/8"-24 | 3/8" | Q | 0.332" | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| 5/16"-18 | 7/16"-20 | 0.438" | 25/64" | 25/64" | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| 5/16"-24 | 7/16"-20 | 0.438" | 25/64" | 25/64" | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| 3/8"-16 | 1/2"-20 | 1/2" | 29/64" | 29/64" | Slotted | 1 | 000000000 | 0000 | 000000000 | 0000 |
| 3/8"-24 | 1/2"-20 | 1/2" | 29/64" | 29/64" | Slotted | 1 | 000000000 | 0000 | 000000000 | 0000 |
| 7/16"-14 | 9/16"-18 | 0.563" | 33/64" | 0.5156" | Slotted | 1 | 000000000 | 0000 | 000000000 | 0000 |
| 7/16"-20 | 9/16"-18 | 0.563" | 33/64" | 0.5156" | Slotted | 1 | 000000000 | 0000 | 000000000 | 0000 |
| 1/2"-13 | 5/8"-18 | 5/8" | 37/64" | 0.5781" | Slotted | 1 | 000000000 | 0000 | 000000000 | 0000 |
| 1/2"-20 | 5/8"-18 | 5/8" | 37/64" | 0.5781" | Slotted | 1 | 000000000 | 0000 | 000000000 | 0000 |
| 5/8"-11 | 3/4"-16 | 0.687" | 11/16" | 11/16" | Slotted | 1 | 000000000 | 0000 | 000000000 | 00000 |
| 5/8"-18 | 3/4"-16 | 0.687" | 11/16" | 11/16" | Slotted | 1 | 000000000 | 0000 | 000000000 | 00000 |
18-8 Stainless Steel with Thick Wall | ||||||||||
| 4-40 | 10-32 | 1/4" | 5/32" | 5/32" | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| 6-32 | 1/4"-20 | 9/32" | No. 7 | 0.201" | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| 8-32 | 5/16"-18 | 19/64" | F | 0.257" | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| 10-24 | 3/8"-16 | 13/32" | 5/16" | 5/16" | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| 10-32 | 3/8"-16 | 13/32" | 5/16" | 5/16" | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| 1/4"-20 | 7/16"-14 | 7/16" | U | 0.368" | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| 1/4"-28 | 7/16"-14 | 7/16" | U | 0.368" | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| 5/16"-18 | 1/2"-13 | 31/64" | 27/64" | 27/64" | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| 5/16"-24 | 1/2"-13 | 31/64" | 27/64" | 27/64" | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| 3/8"-16 | 9/16"-12 | 33/64" | 31/64" | 31/64" | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| 3/8"-24 | 9/16"-12 | 33/64" | 31/64" | 31/64" | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| 7/16"-14 | 5/8"-11 | 21/32" | 17/32" | 17/32" | Slotted | 1 | 000000000 | 0000 | 000000000 | 0000 |
| 7/16"-20 | 5/8"-11 | 21/32" | 17/32" | 17/32" | Slotted | 1 | 000000000 | 0000 | 000000000 | 0000 |
| 1/2"-13 | 3/4"-10 | 21/32" | 21/32" | 21/32" | Slotted | 1 | 000000000 | 0000 | 000000000 | 00000 |
| 1/2"-20 | 3/4"-10 | 21/32" | 21/32" | 21/32" | Slotted | 1 | 000000000 | 0000 | 000000000 | 00000 |
| 5/8"-11 | 7/8"-9 | 11/16" | 49/64" | 49/64" | Slotted | 1 | 000000000 | 0000 | 000000000 | 00000 |
| 3/4"-10 | 1"-8 | 25/32" | 7/8" | 7/8" | Slotted | 1 | 000000000 | 0000 | 000000000 | 00000 |
18-8 Stainless Steel with Extra Thick Wall | ||||||||||
| 1/4"-20 | 1/2"-13 | 31/64" | 27/64" | 27/64" | Slotted | 1 | 000000000 | 0000 | 000000000 | 0000 |
| 5/16"-18 | 9/16"-12 | 33/64" | 31/64" | 31/64" | Slotted | 1 | 000000000 | 0000 | 000000000 | 0000 |
| 3/8"-16 | 5/8"-11 | 21/32" | 17/32" | 17/32" | Slotted | 1 | 000000000 | 0000 | 000000000 | 0000 |
Metric
Installation Bit
Inserts | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Tap | Installation Bits | ||||||||||||
| Thread Size | Thread Pitch, mm | Thread Spacing | Thread Size | Thread Pitch, mm | Installed Lg. | Drill Bit Size | For Max. Hole Dia. | Drive Style | Pkg. Qty. | Pkg. | Each | ||
18-8 Stainless Steel with Thin Wall | |||||||||||||
| M4 | 0.7 | Coarse | 5/16"-24 | __ | 5/16" | I | 0.272" | Slotted | 1 | 000000000 | 00000 | 000000000 | 00000 |
| M5 | 0.8 | Coarse | 5/16"-24 | __ | 5/16" | I | 0.272" | Slotted | 1 | 000000000 | 0000 | 000000000 | 0000 |
| M6 | 1 | Coarse | 3/8"-24 | __ | 3/8" | Q | 0.332" | Slotted | 1 | 000000000 | 0000 | 000000000 | 0000 |
| M8 | 1.25 | Coarse | 7/16"-20 | __ | 7/16" | 25/64" | 25/64" | Slotted | 1 | 000000000 | 0000 | 000000000 | 0000 |
| M10 | 1.5 | Coarse | 1/2"-20 | __ | 1/2" | 29/64" | 29/64" | Slotted | 1 | 000000000 | 0000 | 000000000 | 0000 |
| M12 | 1.75 | Coarse | 5/8"-18 | __ | 5/8" | 37/64" | 37/64" | Slotted | 1 | 000000000 | 0000 | 000000000 | 0000 |
18-8 Stainless Steel with Thick Wall | |||||||||||||
| M3 | 0.5 | Coarse | M6 | 1 | 6.5mm | 5.1 mm | 5.1mm | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| M4 | 0.7 | Coarse | M8 | 1.25 | 7.5mm | 6.9 mm | 6.9mm | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| M5 | 0.8 | Coarse | M8 | 1.25 | 7.5mm | 6.9 mm | 6.9mm | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| M6 | 1 | Coarse | 3/8"-16 | __ | 13/32" | 5/16" | 5/16" | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| M6 | 1 | Coarse | M10 | 1.5 | 10.5mm | 8.6 mm | 8.6mm | Slotted | 5 | 000000000 | 00000 | 000000000 | 0000 |
| M8 | 1.25 | Coarse | 1/2"-13 | __ | 31/64" | 27/64" | 27/64" | Slotted | 1 | 000000000 | 0000 | 000000000 | 0000 |
| M8 | 1.25 | Coarse | M12 | 1.75 | 12.5mm | 10.4 mm | 10.4mm | Slotted | 1 | 000000000 | 0000 | 000000000 | 0000 |
| M10 | 1.5 | Coarse | 9/16"-12 | __ | 33/64" | 31/64" | 31/64" | Slotted | 1 | 000000000 | 0000 | 000000000 | 0000 |
| M10 | 1.5 | Coarse | M16 | 2 | 17mm | 14 mm | 14mm | Slotted | 1 | 000000000 | 0000 | 000000000 | 0000 |
| M10 | 1.25 | Fine | 9/16"-12 | __ | 33/64" | 31/64" | 31/64" | Slotted | 1 | 000000000 | 0000 | 000000000 | 0000 |
| M12 | 1.75 | Coarse | 3/4"-10 | __ | 21/32" | 21/32" | 21/32" | Slotted | 1 | 000000000 | 0000 | 000000000 | 0000 |
| M12 | 1.75 | Coarse | M16 | 2 | 17mm | 14 mm | 14mm | Slotted | 1 | 000000000 | 0000 | 000000000 | 0000 |
| M14 | 2 | Coarse | 7/8"-9 | __ | 11/16" | 49/64" | 49/64" | Slotted | 1 | 000000000 | 0000 | 000000000 | 00000 |
| M16 | 2 | Coarse | 1"-8 | __ | 25/32" | 7/8" | 7/8" | Slotted | 1 | 000000000 | 0000 | 000000000 | 00000 |
| M16 | 2 | Coarse | M24 | 3 | 20mm | 21 mm | 21mm | Slotted | 1 | 000000000 | 0000 | 000000000 | 00000 |
316 Stainless Steel Easy-to-Install Thread-Locking Inserts
These inserts are the most corrosion-resistant thread-locking inserts we offer. Also known as E-Z Lok, they use Loctite® adhesive to keep them in place. The adhesive reaches full strength after 72 hours. All have thick walls for strength and can be used to fill a large hole with stripped threads. They may be mildly magnetic. Installation requires a drill bit and a standard tap. Then set the insert with an installation bit, a slotted screwdriver, or a bolt with two nuts.
For technical drawings and 3-D models, click on a part number.
Inch
Installation Bit
Inserts | Installation Bits | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thread Size | For Tap Thread Size | Installed Lg. | Drill Bit Size | For Max. Hole Dia. | Drive Style | Each | Each | ||
316 Stainless Steel with Thick Wall | |||||||||
| 4-40 | 10-32 | 1/4" | 5/32" | 5/32" | Slotted | 000000000 | 00000 | 000000000 | 00000 |
| 6-32 | 1/4"-20 | 9/32" | No. 7 | 0.201" | Slotted | 000000000 | 0000 | 000000000 | 0000 |
| 8-32 | 5/16"-18 | 19/64" | F | 0.257" | Slotted | 000000000 | 0000 | 000000000 | 0000 |
| 10-24 | 3/8"-16 | 13/32" | 5/16" | 5/16" | Slotted | 000000000 | 0000 | 000000000 | 0000 |
| 10-32 | 3/8"-16 | 13/32" | 5/16" | 5/16" | Slotted | 000000000 | 0000 | 000000000 | 0000 |
| 1/4"-20 | 7/16"-14 | 7/16" | U | 0.368" | Slotted | 000000000 | 0000 | 000000000 | 0000 |
| 5/16"-18 | 1/2"-13 | 31/64" | 27/64" | 27/64" | Slotted | 000000000 | 0000 | 000000000 | 0000 |
| 3/8"-16 | 9/16"-12 | 33/64" | 31/64" | 31/64" | Slotted | 000000000 | 0000 | 000000000 | 0000 |
| 1/2"-13 | 3/4"-10 | 21/32" | 21/32" | 21/32" | Slotted | 000000000 | 0000 | 000000000 | 00000 |
| 3/4"-10 | 1"-8 | 25/32" | 7/8" | 7/8" | Slotted | 000000000 | 00000 | 000000000 | 00000 |
Metric
Installation Bit
Inserts | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For Tap | Installation Bits | ||||||||||
| Thread Size | Thread Pitch, mm | Thread Size | Thread Pitch, mm | Installed Lg., mm | Drill Bit Size | For Max. Hole Dia. | Drive Style | Each | Each | ||
316 Stainless Steel with Thick Wall | |||||||||||
| M3 | 0.5 | M6 | 1 | 6.5 | 5.1 mm | 5.1 mm | Slotted | 000000000 | 00000 | 000000000 | 00000 |
| M4 | 0.7 | M8 | 1.25 | 7.5 | 6.9 mm | 6.9 mm | Slotted | 000000000 | 0000 | 000000000 | 0000 |
| M5 | 0.8 | M8 | 1.25 | 7.5 | 6.9 mm | 6.9 mm | Slotted | 000000000 | 0000 | 000000000 | 0000 |
| M6 | 1 | M10 | 1.5 | 10.5 | 8.6 mm | 8.6 mm | Slotted | 000000000 | 0000 | 000000000 | 0000 |
| M8 | 1.25 | M12 | 1.75 | 12.5 | 10.4 mm | 10.4 mm | Slotted | 000000000 | 0000 | 000000000 | 0000 |
| M10 | 1.5 | M16 | 2 | 17 | 14 mm | 14 mm | Slotted | 000000000 | 0000 | 000000000 | 0000 |
| M12 | 1.75 | M16 | 2 | 17 | 14 mm | 14 mm | Slotted | 000000000 | 00000 | 000000000 | 0000 |
Easy-to-Install Thread-Locking Insert Assortments
These assortments include various sizes of thread-locking inserts. Also known as E-Z Lok, they use Loctite® adhesive to keep them in place. The adhesive reaches full strength after 72 hours. All inserts have thick walls for strength and can be used to fill a large hole.
18-8 stainless steel inserts are more corrosion resistant than black-phosphate steel inserts.
Black-phosphate steel inserts are mildly corrosion resistant.
For technical drawings and 3-D models, click on a part number.
For Tap | ||||||||
|---|---|---|---|---|---|---|---|---|
| Includes | No. of Inserts Included | Thread Size | Thread Pitch, mm | Drill Bit Size | For Max. Hole Dia. | Drive Style | Each | |
Inch Assortments | ||||||||
18-8 Stainless Steel | ||||||||
| 10-24 Thread × 0.406" Installed Lg. (10 Each) 1/4"-20 Thread × 0.438" Installed Lg. (10 Each) 5/16"-18 Thread × 0.484" Installed Lg. (10 Each) 3/8"-16 Thread × 0.516" Installed Lg. (10 Each) 1/2"-13 Thread × 0.656" Installed Lg. (6 Each) | 46 | 3/8"-16 7/16"-14 1/2"-13 9/16"-12 3/4"-10 | __ | 5/16" 23/64" 27/64" 31/64" 21/32" | 5/16" 23/64" 27/64" 31/64" 21/32" | Slotted | 000000000 | 0000000 |
| 10-32 Thread × 0.406" Installed Lg. (10 Each) 1/4"-28 Thread × 0.438" Installed Lg. (10 Each) 5/16"-24 Thread × 0.484" Installed Lg. (10 Each) 3/8"-24 Thread × 0.516" Installed Lg. (10 Each) 1/2"-20 Thread × 0.656" Installed Lg. (6 Each) | 46 | 3/8"-16 7/16"-14 1/2"-13 9/16"-12 3/4"-10 | __ | 5/16" 23/64" 27/64" 31/64" 21/32" | 5/16" 23/64" 27/64" 31/64" 21/32" | Slotted | 000000000 | 000000 |
Black-Phosphate Steel | ||||||||
| 10-24 Thread × 0.406" Installed Lg. (10 Each) 1/4"-20 Thread × 0.438" Installed Lg. (10 Each) 5/16"-18 Thread × 0.484" Installed Lg. (10 Each) 3/8"-16 Thread × 0.516" Installed Lg. (10 Each) 1/2"-13 Thread × 0.656" Installed Lg. (6 Each) | 46 | 3/8"-16 7/16"-14 1/2"-13 9/16"-12 3/4"-10 | __ | 5/16" 23/64" 27/64" 31/64" 21/32" | 5/16" 23/64" 27/64" 31/64" 21/32" | Slotted | 000000000 | 00000 |
| 10-32 Thread × 0.406" Installed Lg. (10 Each) 1/4"-28 Thread × 0.438" Installed Lg. (10 Each) 5/16"-24 Thread × 0.484" Installed Lg. (10 Each) 3/8"-24 Thread × 0.516" Installed Lg. (10 Each) 1/2"-20 Thread × 0.656" Installed Lg. (6 Each) | 46 | 3/8"-16 7/16"-14 1/2"-13 9/16"-12 3/4"-10 | __ | 5/16" 23/64" 27/64" 31/64" 21/32" | 5/16" 23/64" 27/64" 31/64" 21/32" | Slotted | 000000000 | 00000 |
| 1/2"-13 Thread × 0.656" Installed Lg. (6 Each) 5/8"-11 Thread × 0.688" Installed Lg. (7 Each) 3/4"-10 Thread × 0.781" Installed Lg. (7 Each) 1"-8 Thread × 1 1/4" Installed Lg. (2 Each) | 22 | 3/4"-10 7/8"-9 1"-8 1 3/8"-12 | __ | 21/32" 49/64" 7/8" 1 9/32" | 21/32" 49/64" 7/8" 1 9/32" | Slotted | 000000000 | 00000 |
| 1/2"-20 Thread × 0.656" Installed Lg. (6 Each) 5/8"-18 Thread × 0.688" Installed Lg. (7 Each) 3/4"-16 Thread × 0.781" Installed Lg. (7 Each) 1"-14 Thread × 1 1/4" Installed Lg. (2 Each) | 22 | 3/4"-10 7/8"-9 1"-8 1 3/8"-12 | __ | 21/32" 49/64" 7/8" 1 9/32" | 21/32" 49/64" 7/8" 1 9/32" | Slotted | 000000000 | 00000 |
Metric Assortments | ||||||||
18-8 Stainless Steel | ||||||||
| M3×0.5 mm Thread × 6.5 mm Installed Lg. (10 Each) M4×0.7 mm Thread × 7.5 mm Installed Lg. (10 Each) M5×0.8 mm Thread × 7.5 mm Installed Lg. (10 Each) M6×1 mm Thread × 10.5 mm Installed Lg. (10 Each) M8×1.25 mm Thread × 12.5 mm Installed Lg. (10 Each) | 50 | M6 M8 M10 M12 | 1 1.25 1.5 1.75 | 5.1 mm 6.9 mm 8.6 mm 10.4 mm | 5.1mm 6.9mm 8.6mm 10.4mm | Slotted | 000000000 | 000000 |
| M6×1 mm Thread × 0.406" Installed Lg. (10 Each) M8×1.25 mm Thread × 0.484" Installed Lg. (10 Each) M10×1.5 mm Thread × 0.516" Installed Lg. (10 Each) M12×1.75 mm Thread × 0.656" Installed Lg. (6 Each) | 36 | 3/8"-16 1/2"-13 9/16"-12 3/4"-10 | __ | 5/16" 27/64" 31/64" 21/32" | 5/16" 27/64" 31/64" 21/32" | Slotted | 000000000 | 000000 |
| M8×1.25 mm Thread × 12.5 mm Installed Lg. (10 Each) M10×1.5 mm Thread × 17 mm Installed Lg. (10 Each) M12×1.75 mm Thread × 17 mm Installed Lg. (8 Each) M16×2 mm Thread × 20 mm Installed Lg. (5 Each) | 33 | M12 M16 M24 | 1.75 2 3 | 10.4 mm 14 mm 21 mm | 10.4mm 14mm 21mm | Slotted | 000000000 | 000000 |
Black-Phosphate Steel | ||||||||
| M3×0.5 mm Thread × 6.5 mm Installed Lg. (10 Each) M4×0.7 mm Thread × 7.5 mm Installed Lg. (10 Each) M5×0.8 mm Thread × 7.5 mm Installed Lg. (10 Each) M6×1 mm Thread × 10.5 mm Installed Lg. (10 Each) M8×1.25 mm Thread × 12.5 mm Installed Lg. (10 Each) | 50 | M6 M8 M10 M12 | 1 1.25 1.5 1.75 | 5.1 mm 6.9 mm 8.6 mm 10.4 mm | 5.1mm 6.9mm 8.6mm 10.4mm | Slotted | 000000000 | 00000 |
| M6×1 mm Thread × 0.406" Installed Lg. (10 Each) M8×1.25 mm Thread × 0.484" Installed Lg. (10 Each) M10×1.5 mm Thread × 0.516" Installed Lg. (10 Each) M12×1.75 mm Thread × 0.656" Installed Lg. (6 Each) | 36 | 3/8"-16 1/2"-13 9/16"-12 3/4"-10 | __ | 5/16" 27/64" 31/64" 21/32" | 5/16" 27/64" 31/64" 21/32" | Slotted | 000000000 | 00000 |
| M8×1.25 mm Thread × 12.5 mm Installed Lg. (10 Each) M10×1.5 mm Thread × 17 mm Installed Lg. (10 Each) M12×1.75 mm Thread × 17 mm Installed Lg. (8 Each) M16×2 mm Thread × 20 mm Installed Lg. (5 Each) | 33 | M12 M16 M24 | 1.75 2 3 | 10.4 mm 14 mm 21 mm | 10.4mm 14mm 21mm | Slotted | 000000000 | 000000 |
Installation Bits
For fast installation, use these installation bits with power drills and drill presses.
| For Thread Size | Hex Shank Size | Each | |
| 4-40, 6-32, M3 | 1/4" | 000000000 | 00000 |
| 8-32, 10-24, 10-32, M4 | 1/4" | 000000000 | 0000 |
| 10-24, 10-32, 1/4"-20, 1/4"-28, M5 | 1/4" | 000000000 | 0000 |
| 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, M6 | 1/4" | 000000000 | 0000 |
| 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, M8 | 1/4" | 000000000 | 0000 |
| 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, M10 | 3/8" | 000000000 | 0000 |
| 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M12 | 3/8" | 000000000 | 0000 |
| 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, M14 | 3/8" | 000000000 | 00000 |
| 5/8"-11, 5/8"-18, M16 | 3/8" | 000000000 | 00000 |
| 3/4"-10, 3/4"-16 | 3/8" | 000000000 | 00000 |
| 1"-8, 1"-14 | 3/8" | 000000000 | 00000 |
Easy-to-Install Thread-Locking Inserts with Installation Tools
A closed-end tap, drill bit, and installation bit are included with these inserts. Also known as E-Z Lok, they use Loctite® adhesive to keep them in place. The adhesive reaches full strength after 72 hours. A black-phosphate finish provides mild corrosion resistance.
Inserts with a thin wall are often used in small holes or near the edge of a workpiece.
Choose inserts with a thick wall for greater strength than thin-wall inserts, or to fill a large hole.
For technical drawings and 3-D models, click on a part number.
Inch
| Thread Size | For Tap Thread Size | Installed Lg. | Drill Bit Size | For Max. Hole Dia. | Drive Style | No. of Inserts Included | Each | |
Black-Phosphate Steel with Thin Wall | ||||||||
|---|---|---|---|---|---|---|---|---|
| 10-32 | 5/16"-18 | 0.312" | I | 0.272" | Slotted | 10 | 000000000 | 000000 |
| 1/4"-20 | 3/8"-16 | 3/8" | Q | 0.332" | Slotted | 10 | 000000000 | 00000 |
| 5/16"-18 | 7/16"-14 | 0.437" | X | 0.397" | Slotted | 10 | 000000000 | 00000 |
| 3/8"-16 | 1/2"-13 | 1/2" | 29/64" | 29/64" | Slotted | 10 | 000000000 | 00000 |
| 1/2"-13 | 5/8"-11 | 5/8" | 37/64" | 37/64" | Slotted | 10 | 000000000 | 000000 |
Black-Phosphate Steel with Thick Wall | ||||||||
| 8-32 | 5/16"-18 | 0.29" | F | 0.257" | Slotted | 10 | 000000000 | 00000 |
| 10-32 | 3/8"-16 | 0.406" | 5/16" | 5/16" | Slotted | 10 | 000000000 | 00000 |
| 1/4"-20 | 7/16"-14 | 0.437" | 23/64" | 23/64" | Slotted | 10 | 000000000 | 00000 |
| 5/16"-18 | 1/2"-13 | 0.484" | 27/64" | 27/64" | Slotted | 10 | 000000000 | 00000 |
| 3/8"-16 | 9/16"-12 | 0.515" | 31/64" | 31/64" | Slotted | 10 | 000000000 | 00000 |
| 1/2"-13 | 3/4"-10 | 0.656" | 21/32" | 21/32" | Slotted | 10 | 000000000 | 00000 |
Metric
For Tap | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Thread Pitch, mm | Thread Size | Thread Pitch, mm | Installed Lg. | Drill Bit Size | For Max. Hole Dia. | Drive Style | No. of Inserts Included | Each | |
Black-Phosphate Steel with Thin Wall | ||||||||||
| M6 | 1 | 3/8"-16 | __ | 3/8" | Q | 0.332" | Slotted | 10 | 000000000 | 000000 |
Black-Phosphate Steel with Thick Wall | ||||||||||
| M4 | 0.7 | M8 | 1.25 | 7.5mm | 6.9 mm | 6.9mm | Slotted | 10 | 000000000 | 00000 |
| M5 | 0.8 | M8 | 1.25 | 7.5mm | 6.9 mm | 6.9mm | Slotted | 10 | 000000000 | 00000 |
| M6 | 1 | M10 | 1.5 | 10.5mm | 8.6 mm | 8.6mm | Slotted | 10 | 000000000 | 00000 |
| M8 | 1.25 | M12 | 1.75 | 12.5mm | 10.4 mm | 10.4mm | Slotted | 10 | 000000000 | 00000 |
Screw-Locking Easy-to-Install Thread-Locking Inserts
Installation Bit
Adhesive on both the internal and external threads keeps these inserts in place and holds screws tight. Also known as E-Z Lok, they use Loctite® that reaches full strength after 72 hours. A black-phosphate finish provides mild corrosion resistance. All have thick walls for strength and can be used to fill a large hole with stripped threads. Installation requires a drill bit and a standard tap. Then set the insert with an installation bit, a slotted screwdriver, or a bolt with two nuts.
For technical drawings and 3-D models, click on a part number.
Inserts | Installation Bits | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thread Size | For Tap Thread Size | Installed Lg. | Drill Bit Size | For Max. Hole Dia. | Drive Style | Each | Each | ||
Black-Phosphate Steel with Thick Wall | |||||||||
| 10-24 | 3/8"-16 | 13/32" | 5/16" | 5/16" | Slotted | 000000000 | 00000 | 000000000 | 00000 |
| 10-32 | 3/8"-16 | 13/32" | 5/16" | 5/16" | Slotted | 000000000 | 0000 | 000000000 | 0000 |
| 1/4"-20 | 7/16"-14 | 7/16" | 23/64" | 23/64" | Slotted | 000000000 | 0000 | 000000000 | 0000 |
| 5/16"-18 | 1/2"-13 | 31/64" | 27/64" | 27/64" | Slotted | 000000000 | 0000 | 000000000 | 0000 |
| 3/8"-16 | 9/16"-12 | 33/64" | 31/64" | 31/64" | Slotted | 000000000 | 0000 | 000000000 | 0000 |
| 1/2"-13 | 3/4"-10 | 21/32" | 21/32" | 21/32" | Slotted | 000000000 | 0000 | 000000000 | 00000 |
Dremel Quick-Change Wheels
Swap accessories quickly and safely without tools. These wheels have a special arbor hole that work with a pull-twist-release locking mechanism (sold separately). They are also compatible with standard Dremel wheel arbors with a slotted-head-screw locking mechanism.
Boron nitride wheels remain sharp longer, stay cool, and won’t shrink. They are good for cutting nails, rebar, metal studs, threaded rod, conduit, metal HVAC duct, metal door jambs, and galvanized struts. These wheels last 20 times longer than aluminum oxide cutting wheels.
Diamond wheels are the most durable and last the longest while producing smooth and precise cuts. They are ideal for cutting hard and abrasive materials such as marble, concrete, brick, porcelain, ceramics, hard epoxy, and soft or hardwood.
Cutoff Wheels
Cutoff Wheel
Wheel Arbor with Pull-Twist-Release Mechanism
Wheels | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Wheel | Material | Wheel Arbors with Pull-Twist-Release Locking Mechanism | |||||||||
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Pkg. Qty. | Pkg. | Each | ||
1 1/2" Dia. | |||||||||||
For Use On Steel, Stainless Steel, Aluminum | |||||||||||
| 0.02" | 1/8" | 35,000 | Type 1 | Straight | Aluminum Oxide | Fiberglass | 5 | 0000000 | 000000 | 0000000 | 00000 |
| 0.045" | 1/8" | 30,000 | Type 1 | Straight | Aluminum Oxide | Fiberglass | 5 | 0000000 | 00000 | 0000000 | 0000 |
For Use On Steel, Stainless Steel, Copper | |||||||||||
| 0.041" | 1/8" | 35,000 | Type 1 | Straight | Boron Nitride | Fiberglass | 1 | 0000000 | 00000 | 0000000 | 0000 |
For Use On Plastic | |||||||||||
| 0.045" | 1/8" | 35,000 | Type 1 | Straight | Aluminum Oxide | Fiberglass | 5 | 0000000 | 00000 | 0000000 | 0000 |
For Use On Wood | |||||||||||
| 0.07" | 1/8" | 35,000 | Type 1 | Straight | Carbide | __ | 1 | 0000000 | 00000 | 0000000 | 0000 |
For Use On Ceramics, Concrete, Masonry, Stone, Wood | |||||||||||
| 0.023" | 1/8" | 25,000 | Type 1 | Straight | Diamond | __ | 1 | 0000000 | 00000 | 0000000 | 0000 |
Grinding Wheels
Grinding Wheel
Wheel Arbor with Pull-Twist-Release Mechanism
Dremel Quick-Change Accessory Kits
The quick-change arbors in these kits allow you to easily swap accessories.
| No. of Pieces | For Manufacturer Model No. | Includes | Each | |
| 8 | 100, 100-N/7, 200, 285, 3000, 3000-1/24, 3965-02, 3981-01, 4000, 4000-2/30, 4300, 7760-N/10, 7800-01, 7800-02, 8000, 8100-N/21, 8200, 8220, 8220-1/28, 8240, 8250, 8260 | Buffing Wheel, Polishing Compound, Quick-Change Wheel Arbor, Three Sanding Brushes, Two Polishing Wheel Brushes | 0000000 | 000000 |
| 11 | 100, 100-N/7, 200, 285, 3000, 3000-1/24, 3965-02, 3981-01, 4000, 4000-2/30, 4300, 7760-N/10, 7800-01, 7800-02, 8000, 8100-N/21, 8200, 8220, 8220-1/28, 8240, 8250, 8260 | 10 Quick-Change Cutting Wheels, Quick-Change Wheel Arbor | 0000000 | 00000 |
| 18 | 100, 100-N/7, 200, 285, 3000, 3000-1/24, 3965-02, 3981-01, 4000, 4000-2/30, 4300, 7760-N/10, 7800-01, 7800-02, 8000, 8100-N/21, 8200, 8220, 8220-1/28, 8240, 8250, 8260 | Quick-Change Grinding Wheel, Quick-Change Wheel Arbor, Sanding Brush, Sanding Drum, Six Sanding Bands, Six Sanding Discs, Two Grinding Stones | 0000000 | 00000 |
| 70 | 100, 100-N/7, 200, 285, 3000, 3000-1/24, 3965-02, 3981-01, 4000, 4000-2/30, 4300, 7760-N/10, 7800-01, 7800-02, 8000, 8100-N/21, 8200, 8220, 8220-1/28, 8240, 8250, 8260 | 11 Quick-Change Cutting Wheels, 12 Sanding Discs, 40 Sanding Bands, Quick-Change Wheel Arbor, Sanding Drum, Three Buffing Wheels, Two Sanding Brushes | 0000000 | 00000 |