Face Mills For Bronze | McMaster-Carr

Filter by

Mill Diameter

For Use On

Cut Style

Number of Teeth

Arbor Hole Diameter

Mill Thickness

Material

Finish

Aluminum Titanium Nitride (AlTiN) Coated

Diamondlike Carbon (DLC) Coated

Titanium Nitride (TiN) Coated

Shank Diameter

Sold As

Helix Angle

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

REACH

Compliant

RoHS

Compliant

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Shank Type

Overall Length

Body Diameter

Number of Inserts Required

Screw Size

Flute Pitch

Component

Thickness

Tip Radius

Rake Angle Type

189 Products

Face Milling Cutters


Flat-Surface Cut Style

With larger diameters than end mills, these cutters remove greater amounts of material to create a smooth, flat channel in the face of a plate, bar, or other wide workpiece. Compared to fly cutters, they’re more rigid, which makes for a better finish. Also known as shell cutters. Cutters with fewer teeth provide better chip clearance for high-volume, high-speed cuts. Those with more teeth provide a finer finish and generate less vibration at high speeds.

Uncoated—Use uncoated cutters for general purpose milling and short production runs. They stay sharper than coated cutters when used on soft materials like aluminum.

Titanium Nitride (TiN) Coated—Titanium-nitride (TiN) coated cutters create less friction than uncoated cutters, which means they last longer when run at similar speeds. Use coated cutters for demanding, high-speed jobs in hard material as well as for longer production runs. The coating reduces friction and vibration as they’re used, making them more wear resistant than uncoated cutters.

Aluminum Titanium Nitride (AlTiN) Coated—Aluminum-titanium-nitride (AlTiN) coated cutters dissipate heat better than other cutters, especially at high speeds. At high temperatures, the coating creates a layer of aluminum oxide that transfers heat to the chips, keeping the tool cool, even when used without lubrication. Use coated cutters for demanding, high-speed jobs in hard material as well as for longer production runs. The coating reduces friction and vibration as they’re used, making them more wear resistant than uncoated cutters.

High-Speed Steel—High-speed steel cutters are good for general purpose milling in most materials including aluminum brass, bronze, and steel.

Cobalt Steel—Cobalt steel cutters have better heat and wear resistance than high-speed steel. They can run at higher speeds and provide better performance on hard material such as iron, stainless steel, titanium, and tool steel.

	Mill
	Thick.	Dia.	No. of Teeth	Arbor Hole Dia.	Helix Angle	For Use On		Each
Uncoated High-Speed Steel



		1"	1 1/4"	4	1/2"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A108	0000000


		1"	1 1/4"	8	1/2"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A11	000000
		1 1/8"	1 1/2"	4	1/2"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A107	000000
		1 1/8"	1 1/2"	8	1/2"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A12	000000
		1 3/8"	2"	4	3/4"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A106	000000
		1 3/8"	2"	10	3/4"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A14	000000
		1 1/2"	2 1/4"	10	1"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A15	000000
		1 5/8"	2 1/2"	4	1"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A105	000000
		1 5/8"	2 1/2"	10	1"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A16	000000
		1 3/4"	3"	6	1 1/4"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A104	000000
		1 3/4"	3"	12	1 1/4"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A18	000000


		1 7/8"	3 1/2"	12	1 1/4"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A19	000000
		2 1/4"	4"	14	1 1/2"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A21	000000
		2 1/4"	5"	6	1 1/2"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A103	000000
		2 1/4"	5"	8	1 1/2"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A102	000000
		2 1/4"	6"	8	1 1/2"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A101	00000000


		Titanium Nitride (TiN)-Coated High-Speed Steel



				1"	1 1/4"	4	1/2"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A126	000000


				1"	1 1/4"	8	1/2"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A155	000000
				1 1/8"	1 1/2"	4	1/2"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A125	000000
				1 1/4"	1 1/2"	8	1/2"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A154	000000
				1 1/4"	1 3/4"	8	3/4"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A153	000000
				1 3/8"	2"	4	3/4"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A124	000000
				1 3/8"	2"	10	3/4"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A152	000000
				1 1/2"	2 1/4"	10	1"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A151	000000
				1 5/8"	2 1/2"	4	1"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A123	000000
				1 5/8"	2 1/2"	10	1"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A149	000000
				1 5/8"	2 3/4"	10	1"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A148	000000


				1 3/4"	3"	6	1 1/4"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A122	000000
				1 3/4"	3"	12	1 1/4"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A147	000000
				1 7/8"	3 1/2"	12	1 1/4"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A146	000000
				2 1/4"	4"	14	1 1/2"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A145	000000
				2 1/4"	4 1/2"	14	1 1/2"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A144	000000
				2 1/4"	5"	6	1 1/2"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A121	000000
				2 1/4"	5"	8	1 1/2"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A119	000000
				2 1/4"	5"	16	1 1/2"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A143	000000
				2 1/4"	6"	8	1 1/2"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A118	00000000
				2 1/4"	6"	16	1 1/2"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A142	00000000


				Aluminum Titanium Nitride (AlTiN)-Coated High-Speed Steel



						1"	1 1/4"	4	1/2"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A117	000000


						1 1/8"	1 1/2"	4	1/2"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A116	000000
1 1/4"						1 1/2"	8	1/2"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A139	000000
1 1/4"	1 3/4"					8	3/4"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A138	000000
1 3/8"	2"					4	3/4"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A115	000000
1 3/8"	2"					10	3/4"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A137	000000
1 1/2"	1 1/4"					8	1/2"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A141	000000
1 1/2"	2 1/4"					10	1"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A136	000000
1 5/8"	2 1/2"					4	1"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A114	000000
1 5/8"	2 1/2"					10	1"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A135	000000
1 5/8"	2 3/4"					10	1"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A134	000000


1 3/4"	3"					6	1 1/4"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A113	000000
1 3/4"	3"					12	1 1/4"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A133	000000
1 7/8"	3 1/2"					12	1 1/4"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A132	000000
2 1/4"	4"					6	1 1/2"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A112	000000
2 1/4"	4"					14	1 1/2"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A131	000000
2 1/4"	4 1/2"					14	1 1/2"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A129	000000
2 1/4"	5"					8	1 1/2"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A111	00000000
2 1/4"	5"					16	1 1/2"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A128	000000
2 1/4"	6"					8	2"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A109	00000000
2 1/4"	6"					16	2"	37°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	3040A127	00000000


Uncoated Cobalt Steel



		1"				1 1/4"	8	1/2"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A168	000000


		1 1/8"	1 1/2"			8	1/2"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A167	000000
		1 1/4"	1 3/4"			8	3/4"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A166	000000
		1 3/8"	2"			10	3/4"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A161	000000
		1 1/2"	2 1/4"			10	1"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A165	000000
		1 5/8"	2 1/2"			10	1"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A159	000000
		1 5/8"	2 3/4"			10	1"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A164	000000
		1 3/4"	3"			12	1 1/4"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A158	000000
		1 7/8"	3"			12	1 1/4"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A163	000000
		2 1/4"	4"			14	1 1/2"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A157	000000
		2 1/4"	5"			16	1 1/2"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A156	000000


		2 1/4"	6"			16	1 1/2"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A162	00000000


		Titanium Nitride (TiN)-Coated Cobalt Steel



						1"	1 1/4"	8	1/2"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A182	000000


						1 1/8"	1 1/2"	8	1/2"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A181	000000
						1 1/4"	1 3/4"	8	3/4"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A179	000000
						1 3/8"	2"	10	3/4"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A174	000000
						1 1/2"	2 1/4"	10	1"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A178	000000
						1 5/8"	2 1/2"	10	1"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A173	000000
						1 5/8"	2 3/4"	10	1"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A177	000000
						1 3/4"	3"	12	1 1/4"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A172	000000
				1 7/8"		3"	12	1 1/4"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A176	000000
				2 1/4"	4"	14	1 1/2"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A171	000000
				2 1/4"	5"	16	1 1/2"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A169	00000000


				2 1/4"	6"	16	1 1/2"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A175	00000000


				Aluminum Titanium Nitride (AlTiN)-Coated Cobalt Steel



						1"	1 1/4"	8	1/2"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A195	000000


						1 1/8"	1 1/2"	8	1/2"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A194	000000
						1 1/4"	1 3/4"	8	3/4"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A193	000000
						1 3/8"	2"	10	3/4"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A187	000000
						1 1/2"	2 1/4"	10	1"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A192	000000
						1 5/8"	2 1/2"	10	1"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A186	000000
						1 5/8"	2 3/4"	10	1"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A191	000000
						1 3/4"	3"	12	1 1/4"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A185	000000
						1 7/8"	3 1/2"	10	1 1/4"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A189	000000
						2 1/4"	4"	14	1 1/2"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A184	000000
						2 1/4"	5"	16	1 1/2"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A183	00000000


						2 1/4"	6"	10	2"	30°	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	3040A188	00000000

Roughing Face Milling Cutters

Flat-Surface Cut Style

Coarse Pitch

Fine Pitch

Serrations along the cutting edge act as chip breakers, so these cutters can remove large amounts of material at high speeds without sacrificing tool life. With larger diameters than end mills, they remove greater amounts of material to create a smooth, flat channel in the face of a plate, bar, or other wide workpiece. Compared to fly cutters, they’re more rigid, which makes for a better finish. Also known as shell cutters. With better heat and wear resistance than high-speed steel, these cobalt steel cutters can run at higher speeds and provide better performance on hard material, such as hardened steel, iron, and titanium.

Uncoated—Use uncoated cutters for general purpose milling and short production runs. They stay sharper than coated cutters when used on soft material, such as aluminum.

Coarse Pitch—Coarse pitch cutters create large chips for better performance on soft metals, such as aluminum, brass, and bronze.

Fine Pitch—Fine pitch cutters last longer than coarse-pitch end mills and produce smaller chips for better performance on hard metals, such as hardened steel, iron, and titanium.

	Mill						Coarse Pitch		Fine Pitch
	Thick.	Dia.	No. of Teeth	Arbor Hole Dia.	Helix Angle	For Use On		Each		Each
Uncoated Cobalt Steel



		1 3/8"	2"	8	3/4"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N11	0000000	6639N44	0000000


		1 1/2"	2 1/4"	8	1"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N12	000000	6639N45	000000
		1 5/8"	2 1/2"	8	1"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N13	000000	6639N46	000000
		1 5/8"	2 3/4"	10	1"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N14	000000	6639N47	000000
		1 7/8"	3 1/2"	10	1 1/4"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N16	000000	6639N49	000000
		2"	3"	10	1 1/4"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N15	000000	6639N48	000000
		2 1/4"	4"	10	1 1/2"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N17	000000	6639N51	000000
		2 1/4"	4 1/2"	12	1 1/2"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N18	00000000	6639N52	00000000
		2 1/4"	5"	12	1 1/2"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N19	00000000	6639N53	00000000
		2 1/4"	6"	14	1 1/2"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N21	00000000	6639N54	00000000


		Titanium Nitride (TiN)-Coated Cobalt Steel



				1 3/8"	2"	8	3/4"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N22	000000	6639N55	000000


				1 1/2"	2 1/4"	8	1"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N23	000000	6639N56	000000
				1 5/8"	2 1/2"	8	1"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N24	000000	6639N57	000000
				1 5/8"	2 3/4"	10	1"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N25	000000	6639N58	000000
				1 7/8"	3 1/2"	10	1 1/4"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N27	000000	6639N61	000000
				2"	3"	10	1 1/4"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N26	000000	6639N59	000000
				2 1/4"	4"	10	1 1/2"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N28	00000000	6639N62	00000000
				2 1/4"	4 1/2"	12	1 1/2"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N29	00000000	6639N63	00000000
				2 1/4"	5"	12	1 1/2"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N31	00000000	6639N64	00000000
				2 1/4"	6"	14	1 1/2"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N32	00000000	6639N65	00000000


				Aluminum Titanium Nitride (AlTiN)-Coated Cobalt Steel



						1 3/8"	2"	8	3/4"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N33	000000	6639N66	000000


						1 1/2"	2 1/4"	8	1"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N34	000000	6639N67	000000
						1 5/8"	2 1/2"	8	1"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N35	000000	6639N68	000000
						1 5/8"	2 3/4"	10	1"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N36	000000	6639N69	000000
						1 7/8"	3 1/2"	10	1 1/4"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N38	000000	6639N72	000000
						2"	3"	10	1 1/4"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N37	000000	6639N71	000000
						2 1/4"	4"	10	1 1/2"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N39	00000000	6639N73	00000000
						2 1/4"	4 1/2"	12	1 1/2"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N41	00000000	6639N74	00000000
						2 1/4"	5"	12	1 1/2"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N42	00000000	6639N75	00000000
						2 1/4"	6"	14	1 1/2"	30°	Aluminum, Brass, Bronze, Copper, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Wood	6639N43	00000000	6639N76	00000000

Carbide Inserts for Replaceable Carbide-Insert Face Milling Cutters

Individual Carbide

Insert Case

Image of Product. Front orientation. Face Mill Inserts. Carbide Inserts for Replaceable Carbide-Insert Face Milling Cutters.

Image of Attribute. Front orientation. Contains Annotated, MultipleImages. Carbide Inserts for Replaceable Carbide-Insert Face Milling Cutters.

Pair these carbide inserts with insert holders to mill the surface of plates and bars. They have a negative rake, so they have cutting edges on both sides—they last longer than comparable positive-rake inserts. As each edge dulls, you can rotate to a fresh one. When all the edges on one side are worn, flip the insert over. Built-in chip breakers prevent long chips from forming, so they won’t block the flow of coolant or damage your tool.

Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment. Inserts sold in packs come factory sealed from the manufacturer for maximum traceability.

	For Mill Dia.	IC Dia.	Cutting Edge Lg.	Thk.	Hole Dia.	No. of Cutting Edges	Tip Radius	Rake Angle Type	Pkg. Qty.		Pkg.
Diamondlike Carbon (DLC)-Coated Carbide



	Aluminum, Brass, Bronze, Copper, Plastic	1 1/2", 2", 2 1/2", 3", 4", 5"	0.579"	0.58"	1/4"	7/32"	8	1/32"	Negative	1	8339N128	000000


	Aluminum, Brass, Bronze, Copper, Plastic	1 1/2", 2", 2 1/2", 3", 4", 5"	0.579"	0.58"	1/4"	7/32"	8	1/32"	Negative	10	8339N124	000000

Insert Holders


	Shank Mount Shown with Inserts (Sold Separately)	Arbor Mount Shown with Inserts (Sold Separately)

	Mill
	Dia.	Thk.	Arbor Hole Dia.	Keyway Wd.	Shank Dia.	Helix Angle	No. of Inserts Req.	Material	Rake Angle Type		Each
Shank Mount







				Coarse Grit

				1 1/2"	1 9/16"	—	—	1 1/4"	45°	2	Nickel-Plated Steel	Negative	9165N137	0000000


				1 1/2"	1 9/16"	—	—	1 1/4"	45°	3	Nickel-Plated Steel	Negative	9165N138	000000
				2"	1 9/16"	—	—	1 1/4"	45°	3	Nickel-Plated Steel	Negative	9165N139	000000
				2 1/2"	1 9/16"	—	—	1 1/4"	45°	4	Nickel-Plated Steel	Negative	9165N141	000000


				Arbor Mount







								Coarse Grit

								2"	1 9/16"	3/4"	0.313"	—	45°	3	Nickel-Plated Steel	Negative	9165N121	000000


								2 1/2"	1 9/16"	3/4"	0.313"	—	45°	4	Nickel-Plated Steel	Negative	9165N124	000000
								3"	1 31/32"	1"	0.382"	—	45°	5	Nickel-Plated Steel	Negative	9165N127	000000
								4"	1 31/32"	1 1/2"	0.626"	—	45°	5	Nickel-Plated Steel	Negative	9165N131	000000
								5"	2 15/32"	1 1/2"	0.626"	—	45°	6	Nickel-Plated Steel	Negative	9165N134	000000




										Fine Grit

										2"	1 9/16"	3/4"	0.313"	—	45°	4	Nickel-Plated Steel	Negative	9165N122	000000


										2 1/2"	1 9/16"	3/4"	0.313"	—	45°	5	Nickel-Plated Steel	Negative	9165N125	000000
										3"	1 31/32"	1"	0.382"	—	45°	6	Nickel-Plated Steel	Negative	9165N129	000000
										4"	1 31/32"	1 1/2"	0.626"	—	45°	8	Nickel-Plated Steel	Negative	9165N133	000000
										5"	2 15/32"	1 1/2"	0.626"	—	45°	10	Nickel-Plated Steel	Negative	9165N136	00000000




												Extra-Fine Grit

												2"	1 9/16"	3/4"	0.313"	—	45°	5	Nickel-Plated Steel	Negative	9165N123	000000


												2 1/2"	1 9/16"	3/4"	0.313"	—	45°	6	Nickel-Plated Steel	Negative	9165N126	000000
												3"	1 31/32"	1"	0.382"	—	45°	8	Nickel-Plated Steel	Negative	9165N128	000000
												4"	1 31/32"	1 1/2"	0.626"	—	45°	10	Nickel-Plated Steel	Negative	9165N132	00000000
												5"	2 15/32"	1 1/2"	0.626"	—	45°	13	Nickel-Plated Steel	Negative	9165N135	00000000

Counterbore Insert Holders

Shown with Inserts (Sold

Separately)

Designed to reduce waste and costs during high-volume jobs, these counterbores consist of both an insert and a holder. When the cutting edges dull, you can replace the insert rather than the entire tool. The inserts are locked in place with a screw for a hold that’s strong enough to handle the high speeds of a CNC machine. These counterbores create flat-bottomed holes that allow socket head screws to sit flush with the surface of your material.

	Counterbore Insert Holders								Replacement Insert Screws
		Dia.
	For Screw Size	Body	Shank	Overall Lg.	Max. Hole Drilling Dp.	No. of Inserts Req.		Each	Pkg. Qty.		Pkg.
Steel



		1/4"	0.422"	3/4"	2 7/8"	0.54"	1	8129N122	0000000	10	8129N133	000000


		5/16"	0.515"	3/4"	2 7/8"	0.54"	1	8129N125	000000	10	8129N133	00000
		3/8"	0.515"	3/4"	2 7/8"	0.54"	1	8129N124	000000	10	8129N133	00000
		7/16"	0.703"	3/4"	2 7/8"	0.54"	1	8129N127	000000	10	8129N133	00000
		1/2"	0.797"	3/4"	3 1/4"	0.79"	2	8129N121	000000	10	8129N133	00000
		5/8"	1"	3/4"	3 1/4"	0.79"	2	8129N126	000000	10	8129N133	00000
		3/4"	1.187"	3/4"	3 1/4"	0.79"	2	8129N123	000000	10	8129N133	00000
		M6	0.440"	3/4"	2 7/8"	0.54"	1	8129N131	000000	10	8129N133	00000
		M8	0.558"	3/4"	2 7/8"	0.54"	1	8129N132	000000	10	8129N133	00000
		M10	0.676"	3/4"	2 7/8"	0.54"	1	8129N128	000000	10	8129N133	00000
		M12	0.755"	3/4"	3 1/4"	0.79"	2	8129N129	000000	10	8129N133	00000

Carbide Inserts


Individual Carbide Insert Case

Inserts have a positive rake, which means the cutting edge is angled to reduce vibration and prevent thin workpieces from bending. For longer life, each insert has three cutting edges—when one edge dulls, rotate to the next one. They have chip breakers to stop long chips from forming, so they won’t block the flow of coolant or damage your tool. Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment. Inserts sold in packs come factory sealed from the manufacturer for maximum traceability.

						Each		Package
	IC Dia.	Thk.	Cutting Edge Lg.	Tip Radius	For Use On		Each	Pkg. Qty.		Pkg.
Titanium Nitride (TiN) Coated



		7/32"	3/32"	0.35"	1/64"	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	8909N122	000000	10	8909N121	000000