Illuminate harsh, wet areas, even outside in extreme weather—these lights are often used on ship building ports. Rated NEMA 4X and UL marine listed, they’re sealed against heavy rain and washdowns, and they won’t corrode from salt water or cleaning chemicals. They’re also IP rated to stay sealed in dusty conditions. And with a durable glass lens, they’re rated IK08 for impact resistance. They’ll work in temperatures from -40° F to 145° F. Bright enough for environments that require high visibility, these lights have a cool appearance that highlights white and blue tones.

A quick-connect mount lets you wire these lights to an outlet box without having to hold them in place. First, wire the mount to your outlet box with a 3/4" conduit connector. Then twist the light into the mount to lock it in place.

These lights are DLC (DesignLight Consortium) listed, so they’ve been tested to confirm their energy efficiency. They’re also CE Marked to meet European safety standards.

Hang these lights in garages and covered walkways to create a safe, well-lit path. They’re also known as canopy lights. All are either UL or ETL Listed for use in wet locations. Select a light appearance to match your existing lighting. If you’re not sure what temperature you need, choose a light with a selectable light appearance. You can adjust the temperature with a switch.

Fasten these lights to a ceiling or to an outlet box. Styles A-C can also be suspended like a pendant from conduit.

Styles B and D illuminate both the ceiling and the ground, so your space feels brighter and larger. When replacing older fixtures, use a mounting plate (sold separately) to cover any hole larger than the dimensions of the new fixture.

Lights with a light sensor automatically turn on in low light conditions. When adding a motion sensor to a light that doesn’t already have one, you’ll also need a remote (sold separately). Use the remote to set the motion sensor’s reach and adjust how much darkness triggers the light sensor.

Lights rated IP65 are sealed to keep out dust and driving rain.

Light up entryways and paths alongside your building for safe travel after dark. These lights are also known as wall packs. Mount them to outlet boxes on the exterior of your building.

These lights meet UL or ETL for wet locations. Lights rated IP65 are sealed to keep out dust and driving rain.

Styles A-E have a switch for selecting the light appearance. Connect them to your lighting control system or toggle the light sensor to automatically turn them on when it gets dark.

Lights with an adjustable beam angle have a switch for selecting a narrow, medium, or wide spread of light. Lights with a downcast beam are also known as full cut-off lights. Often installed above doors, they help reduce glare by aiming light down instead of toward your eyes.

Lights with an emergency backup battery keep running for at least 90 minutes during an outage.

Replace high-intensity discharge (HID) lights with the longer-lasting, energy-efficient LEDs. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. LED lights are perceived as brighter at night than high-intensity discharge light technologies, so they require fewer lumens to provide the same brightness. Match your old light’s wattage to find the right LED bulb. A bulb’s estimated yearly cost is based on 3 hours of usage per day at $0.11 per kWh.

Ballast bypass bulbs eliminate the need for a ballast, so the socket must be wired directly to the power source.