Create recessed can lights by pairing a housing with a light. These lights fit into ceiling cutouts to provide directed, ambient lighting so they’re often used in indoor spaces such as offices and lobbies, or for decorative lighting. Rated for use in damp locations, these lights withstand humidity and moisture.

Lights have built-in LEDs, which last longer, are more efficient, and generate less heat than other technologies. Clips on the sides hold the light in a housing.

Baffle-reflector lights minimize glare and soften the light. Smooth-reflector lights focus light down.

Install screw-in base lights using the screw-in base converter.

Lights with a hardwire connection have three switches for adjusting their brightness and light appearance.

Warm light highlights yellow tones similarly to incandescent bulbs. Neutral light is often used in offices and retail stores. Cool light is best for performing detailed tasks and inspections.

For technical drawings and 3-D models, click on a part number.

Illuminate steps to reduce the risk of tripping or falling, especially at night or in poorly lit areas. They mount flush with your wall or step, so they won’t get snagged or bumped. A glass lens protects the LEDs from dust and damage. UL listed for wet locations, these lights are sealed to keep out humidity as well as dripping and splashed liquids.

Mount these lights in a standard 1-gang outlet box (not included) with the included mounting bracket.

Install wall-mount lights alongside the step. Install step-mount lights on the riser of the step.

For technical drawings and 3-D models, click on a part number.

Mount these lights flush with ceilings in wet locations—all are sealed to keep out humidity and dripping, splashing, and falling liquids. Unlike recessed can lights, which require a separate housing, these fit directly into a cutout in your ceiling and are held in place by springs. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. Use the switch on the power supply to choose between warm, cool, or neutral light—no more mismatched lights. All have passed strict U.S. and Canadian safety standards.

For technical drawings and 3-D models, click on a part number.

Also known as wall packs, these lights mount to exterior walls to illuminate building perimeters, entryways, loading docks, and other outdoor areas. No need for timers—a sensor automatically turns the light on at dusk and off at dawn. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other technologies. They produce a neutral white light appearance. The lens is prismatic to disperse light evenly, and made of durable, impact-resistant polycarbonate.

Illuminate outdoor areas such as building grounds and entrance signs with a narrow beam of directed light. Heads adjust to direct light where needed.

Lights with a cool light appearance highlight white/blue tones creating good visibility at night.

Style A have built-in LEDs that last longer, are more efficient, and generate less heat than other technologies. These fixtures can be set to cool or neutral color appearances. They can be hardwired to operate on any of the voltages listed.

Lights with an aluminum housing resist corrosion better than those with a zinc housing.

Also known as wall packs, these lights mount to exterior walls and ceilings. With built-in LEDs, they last longer, are more efficient, and generate less heat than other technologies. They can be hardwired to operate on any of the voltages listed. All have a prismatic lens that disperses light evenly.

Lights with a cool light appearance highlight white/blue tones creating good visibility at night.

Style A and D lights can be set to cool, neutral, or warm color appearances.

Ceiling-mount lights are also known as canopy lights.

Lights with a photocell switch on/off automatically when they detect the presence or absence of light.