IP or NEMA rated, these lights have a sealed lens to keep dust and moisture out for protection against washdowns. All meet ETL or UL standards for wet locations.

Mount these lights to the ceiling with the included brackets.

Style C have a tubular lens that allows light to shine from all directions. IP67 lights withstand temporary submersion, so they’ll handle your wettest areas.

Lights that meet NSF/ANSI 2 standards are commonly used in food handling and processing areas with splashing liquid.

Also known as troffers, these lights fit flush into most drop-ceiling grids. They’re fully sealed with an airtight gasket, so they’re rated IP65 for protection against low-pressure washdowns, humidity, and dust. Install them anywhere that requires frequent cleaning, even an ISO Class 5 clean room. They also meet NSF/ANSI 2, so you can use them in food processing areas with splashing liquid. These lights won’t shatter and contaminate your area—they’re rated IK10, the highest rating for impact protection. And since they’re IC rated, you won’t risk a fire if you install them in direct contact with insulation.

Casting a neutral light dispersed by a frosted lens, these lights won’t cause glare on equipment. The lens is made of acrylic to resist scratching and yellowing.

Illuminate areas that need frequent cleaning, such as food processing lines, with long rows of lights. Rated IP65, these lights have a sealed lens and liquid-tight end caps that protect them from low-pressure washdowns and dust. They also meet NSF/ANSI 2 for splash zones, so they’re safe to use in food areas with splashing liquid. These lights won’t shatter and contaminate your area—with a durable polycarbonate lens, they’re rated IK08 for impact resistance. Adjust the light appearance and brightness with the included remote.

When creating a run of lights, you’ll need connectors between the lights and a power cable. The connectors don’t require any wiring—just remove the end cap and insert the connector. Cable connectors let you space out the lights. In this setup, you’ll need a power cable for every 24 lights at 120V AC. Butt connectors join lights together end-to-end for a continuous row of light. You’ll need a power cable for every 30 4-ft. long lights, or 40 2-ft. and 3-ft. long lights at 120V AC.

Mount these lights to the ceiling with the included brackets. Add mounting hardware to suspend your lights from the ceiling. It includes stainless steel wire rope and connectors.

To control the lights automatically when people enter and exit the area, set them up with motion sensors. The sensors are sealed against washdowns. You’ll need a sensor for every 15 lights. Remote-controlled sensors are operated with a remote control that’s sold separately—one remote will work for multiple sensors. Bluetooth sensors connect to a free app. In the app, you can program and control lights to work in sync or independently.